Frontgate Holiday Oxford Fir 175389 MUL Manual

(4 SECTIONS WITH END TO END LIGHT SOURCE WITH INDOOR USE ADAPTOR)
PLEASE READ INSTRUCTIONS BEFORE ASSEMBLYING YOUR TREE
Your Oxford Fir 9ft Color Changing Tree Multi should contain the following:
If any piece is missing please contact a Frontgate Product Specialist:
1 Tree Stand
4 Tree Sections Labeled
30 LED Replacement Bulb
HOW TO ASSEMBLE AND SHAPE YOUR TREE:
1. Carefully remove the tree from its package.
2. Set the metal stand on a level floor, ensure it is cross-shaped for firm standing.
MATERIAL: TREE STAND
1.
2. OPER THE LEGS ON 90 ANGLES, TILL THE HOLES ON TUBE MATCH.
INSERT 3 EYE BOLTS AND SCREW THEM INTO THE TUBE.
3.
3. Remove the protective cap from the tree bottom (D). Insert the tree bottom (D) into the tree stand.
Tighten the eye bolts to secure tree. Remove bubble wrap and cord from the tree bottom (D). To
allow branches to unfold into place. Shape the branches of tree bottom (D).
4. Remove the protective cap from the tree middle (C). Insert the tree middle (C) into the tree bottom
(D). While inserting the pole of the tree middle (C) to tree bottom (D), make sure the jack and
socket match each other to avoid damaging internal electrical parts. Remove the bubble wrap
from the tree middle (C) to allow the branches to unfold into place. Shape the branches of tree
Oxford Fir 9ft Color Changing Tree Multi
(175389 MUL)
ASSEMBLY INSTRUCTIONS
1 Adaptor w/Control Box
3 Eyelet Screws
10 C6 LED Bulb Cap
3 EYE BOLTS
ASSEMBLY INSTRUCTION FOR TREE STAND
1Remot Control
4 Hinged Pins