Page 2
– ITEM 7.5 ft. Designer Lit Spruce – Item #66637 9 ft SKU 66637 – 7.5’ Designer Lit Spruce PARTS LIST NUMBER OF PERSONS TREE RECOMMENDED FOR A. BOTTOM 2387 TIPS STANDARD STAND UL 1150 LIGHTS B. MIDDLE ASSEMBLY: 2 C.
Page 3
2.2 – Locate Tree Section “A” and remove the protective caps that are on the top and bottom of the pole (they can be replaced when you re-pack your tree). Insert Tree Section “A” into the tree stand (See Fig. 2B). Make sure the pole is firmly inserted into the stand, and then turn all three screws until contact is made with the pole.
Page 4
3. Light Set and Power Connection: 3.1 – In the tree carton, there is a brown box that contains your On/Off Remote Kit. Plug your On/Off Remote Control Unit (See Fig. 3A) into the closest electrical outlet near the tree (See Fig. 3B). Plug the extension cords into the On/Off Remote Control Unit.
STORAGE TIPS Unplug the extension cord plugs from the Remote Unit attached to the electrical outlet on the wall. Take off all of your ornaments and tree decorations before packing your tree back into its storage boxes. Starting from the top, gently lift off each section. Each section should be packed away in the carton that it came in. Each tree section should be turned upside down and then carefully press branches toward center pole for easier placement into the storage box.
CARE & MAINTENANCE INSTRUCTION 1. This is for decorative use only - do not immerse in water or expose to heat. Keep away from fire. 2. Please use water only for cleaning purpose. 3. When not in use, store neatly in a cool, dry location protected from sun light. 4.
TROUBLE SHOOTING TIPS (Cont.) 3. If some individual lights do not light up, it may be due to becoming dislodged from the socket during assembly. Note those not lit up; check for looseness and push any loose bulbs gently back into their socket. If they still do not light up, try a replacement light bulb (supplied by manufacturer) and follow directions in section describing how to replace light bulbs.
Discard product if the attachment plug is damaged Please contact one of our Product Specialists for assembly assistance or questions 1-800-537-8484 or email ps@frontgate.com. Specialists are available weekdays 8:00 a.m. 8:00p.m.EST or Saturday 9:30 a.m. to 6:00 p.m.
Page 11
– ITEM 9 ft. Designer Lit Spruce – Item #66639 9 ft SKU 66639 – 9’ Designer Lit Spruce PARTS LIST NUMBER OF PERSONS TREE RECOMMENDED FOR A. BOTTOM 3411 TIPS STANDARD STAND UL 1600 LIGHTS B. LOWER MIDDLE ASSEMBLY: 2 C.
Page 12
2.2 – Locate Tree Section “A” and remove the protective caps that are on the top and bottom of the pole (they can be replaced when you re-pack your tree). Insert Tree Section “A” into the tree stand (See Fig. 2B). Make sure the pole is firmly inserted into the stand, and then turn all three screws until contact is made with the pole.
Page 13
STORAGE TIPS 3. Light Set and Power Connection: 3.1 – In the tree carton, there is a brown box that contains your On/Off Remote Kit. Plug your On/Off Remote Control Unit (See Fig. 3A) into the closest electrical outlet near the tree (See Fig. 3B). Plug the extension cords into the On/Off Remote Control Unit.
Page 14
STORAGE TIPS STORAGE TIPS Unplug the extension cord plugs from the Remote Unit attached to the electrical outlet on the wall. Take off all of your ornaments and tree decorations before packing your tree back into its storage boxes. Starting from the top, gently lift off each section. Each section should be packed away in the carton that it came in. Each tree section should be turned upside down and then carefully press branches toward center pole for easier placement into the storage box.
Page 15
CARE & MAINTENANCE INSTRUCTION 1. This is for decorative use only - do not immerse in water or expose to heat. Keep away from fire. 2. Please use water only for cleaning purpose. 3. When not in use, store neatly in a cool, dry location protected from sun light. 4.
Page 16
TROUBLE SHOOTING TIPS (Cont.) 3. If some individual lights do not light up, it may be due to becoming dislodged from the socket during assembly. Note those not lit up; check for looseness and push any loose bulbs gently back into their socket. If they still do not light up, try a replacement light bulb (supplied by manufacturer) and follow directions in section describing how to replace light bulbs.
Page 17
Discard product if the attachment plug is damaged Please contact one of our Product Specialists for assembly assistance or questions 1-800-537-8484 or email ps@frontgate.com. Specialists are available weekdays 8:00 a.m. 8:00p.m.EST or Saturday 9:30 a.m. to 6:00 p.m.
Page 20
– ITEM 10 ft. Designer Lit Spruce – Item #66790 9 ft SKU 66790 – 10’ Designer Lit Spruce PARTS LIST NUMBER OF PERSONS TREE 4104 TIPS STANDARD STAND RECOMMENDED FOR A. BOTTOM UL 1750 LIGHTS B. LOWER MIDDLE ASSEMBLY: 2 C.
Page 21
2.2 – Locate Tree Section “A” and remove the protective caps that are on the top and bottom of the pole (they can be replaced when you re-pack your tree). Insert Tree Section “A” into the tree stand (See Fig. 2B). Make sure the pole is firmly inserted into the stand, and then turn all three screws until contact is made with the pole.
Page 22
STORAGE TIPS 3. Light Set and Power Connection: 3.1 – In the tree carton, there is a brown box that contains your On/Off Remote Kit. Plug your On/Off Remote Control Unit (See Fig. 3A) into the closest electrical outlet near the tree (See Fig. 3B). Plug the extension cords into the On/Off Remote Control Unit.
Page 23
STORAGE TIPS Unplug the extension cord plugs from the Remote Unit attached to the electrical outlet on the wall. Take off all of your ornaments and tree decorations before packing your tree back into its storage boxes. Starting from the top, gently lift off each section. Each section should be packed away in the carton that it came in. Each tree section should be turned upside down and then carefully press branches toward center pole for easier placement into the storage box.
Page 24
CARE & MAINTENANCE INSTRUCTION 1. This is for decorative use only - do not immerse in water or expose to heat. Keep away from fire. 2. Please use water only for cleaning purpose. 3. When not in use, store neatly in a cool, dry location protected from sun light. 4.
Page 25
TROUBLE SHOOTING TIPS (Cont.) 3. If some individual lights do not light up, it may be due to becoming dislodged from the socket during assembly. Note those not lit up; check for looseness and push any loose bulbs gently back into their socket. If they still do not light up, try a replacement light bulb (supplied by manufacturer) and follow directions in section describing how to replace light bulbs.
Page 26
Discard product if the attachment plug is damaged Please contact one of our Product Specialists for assembly assistance or questions 1-800-537-8484 or email ps@frontgate.com. Specialists are available weekdays 8:00 a.m. 8:00p.m.EST or Saturday 9:30 a.m. to 6:00 p.m.
Need help?
Do you have a question about the Holiday 66637 and is the answer not in the manual?
Questions and answers