TROUBLE SHOOTING TIPS (Cont.) 3. If some individual lights do not light up, it may be due to becoming dislodged from the socket during assembly. Note those not lit up; check for looseness and push any loose bulbs gently back into their socket. If they still do not light up, try a replacement light bulb (supplied by manufacturer) and follow directions in section describing how to replace light bulbs.
Discard product if the attachment plug is damaged Please contact one of our Product Specialists for assembly assistance or questions at 1-800-537-8484 or email ps@frontgate.com. Specialists are available weekdays 8:00 a.m. to 8:00 p.m. EST or Saturday 9:30 a.m. to 6:00 p.m.
Page 6
Big plug box instruction The plug box tight on the tree. Step 1 Open the plug box from the tree. Step 2 Put out the cord from the plug box. Then plug the light set from upper/lower section into the cord. Step 3 Put back the cord into the plug box.
4 Parts STORAGE TIPS Step 1 Step 4 Unplug all tree sections and unplug light(s) from power strips. - Repeat step 3 for section (B). Step 5 Step 2 Untighten screws on stand and remove stand from section (A). Remove section (D) from (C) and gently press branches Repeat step 3.
Page 10
TROUBLE SHOOTING TIPS (Cont.) 3. If some individual lights do not light up, it may be due to becoming dislodged from the socket during assembly. Note those not lit up; check for looseness and push any loose bulbs gently back into their socket. If they still do not light up, try a replacement light bulb (supplied by manufacturer) and follow directions in section describing how to replace light bulbs.
Page 11
Discard product if the attachment plug is damaged Please contact one of our Product Specialists for assembly assistance or questions at 1-800-537-8484 or email ps@frontgate.com. Specialists are available weekdays 8:00 a.m. to 8:00 p.m. EST or Saturday 9:30 a.m. to 6:00 p.m.
Page 12
Big plug box instruction The plug box tight on the tree. Step 1 Open the plug box from the tree. Step 2 Put out the cord from the plug box. Then plug the light set from upper/lower section into the cord. Step 3 Put back the cord into the plug box.
Need help?
Do you have a question about the SNOW ANGEL PINE 7.5ft and is the answer not in the manual?
Questions and answers