1. Press either the up or down key and hold for longer than 1
second.
2. The display will flash to show that you are in Set Temperature
mode, then you can release the key.
3. Press either up or down again to change to your desired Set Temperature.
Hold the key down for over 2 seconds to fast-advance the Set Temperature.
4. The display will return to the normal room temperature after the keys have
been released for 3 seconds.
Press either the up or down key for less than 1 second to see the Set Temperature.
The factory default is 68°F (20°C) when started with the System Switch Off or
Heat, and 78° (26°C) when started with the System Switch on Cool.
3
©2010 Hunter Fan Company
Operation
Set Temperature
25