1. Manuals
  2. Brands
  3. Safety Vision Manuals
  4. Dash Cameras
  5. SAFEDRIVE-AI-2
  6. User manual

Safety Vision SAFEDRIVE-AI-2 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
U S E R
G U I D E

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SAFEDRIVE-AI-2 and is the answer not in the manual?

Questions and answers

Related Manuals for Safety Vision SAFEDRIVE-AI-2

Summary of Contents for Safety Vision SAFEDRIVE-AI-2

  • Page 1 U S E R G U I D E...
  • Page 2 Safety Vision reserves the right to amend the information in this document at any time without prior notice. This material is confidential and the property of Safety Vision. It is shared with your company for the sole purpose of helping you with the operation of the described equipment.

  • Page 3: Table Of Contents

    Selecting the DVR installation Area Installing the DVR Bracket Installing the DVR Installing the Optional DMS Camera Connecting the Power Supply, Signal Cables, and Wiring Connecting SafeDrive-AI-2 to the Safety Vision DX app Calibrating SafeDrive-AI-2 ADAS Camera DSC Camera Optional DMS Camera...
  • Page 4 SAFEDRIVE-AI-2 USER GUIDE Time Sync Start-up ON/OFF Sleep Wake Power Box User Setup Network Setup Server Setup Local WiFi Communication Module Bluetooth Ports Application FTP Server Download Voice Setup Face Compare Video Setup Menu Live View Preview Record General Main Stream...
  • Page 5 SAFEDRIVE-AI-2 USER GUIDE Speed Location Mileage A-GPS Driver sign-on Key Snap Setting Time Snap Trigger Snap Distance Snap Barcode Alarm Setup Menu Base IO Alarm Speed Alarm Panel Alarm GPS Alarm Driver Sign-on Key setup Video Video Loss Cover Privacy Mode...
  • Page 6 SAFEDRIVE-AI-2 USER GUIDE Video Export Viewing General Device Information Basic Info Device Module Storage Device Version Info Other APPENDIX A: SPECIFICATIONS CLIENT SUPPORT TECH SUPPORT FCC COMPLIANCE STATEMENT...

  • Page 7: Overview

    SAFEDRIVE-AI-2 USER GUIDE Overview SafeDrive AI 2 is the next-generation windshield DVR that combines the latest in Advanced Driver Assistance Systems (ADAS) and driver behavior monitoring into one compact solution. Equipped with enhanced dual- cameras and an AI-powered engine, SafeDrive AI 2 continuously scans the road for dangers and monitors driver actions for unsafe behaviors, issuing audible alerts to prevent accidents.

  • Page 8: Acronyms And Abbreviations

    SAFEDRIVE-AI-2 USER GUIDE Acronyms and Abbreviations Below is a list of common abbreviations found throughout this guide: ABBREVIATION DEFINITION Accessory (Vehicle Ignition Source) ADAS Advanced Driver Assistance System Artificial Intelligence Blind Side Controlled Area Network Common Intermediate Format DHCP Dynamic Host Configuration Protocol...
  • Page 9 SAFEDRIVE-AI-2 USER GUIDE ABBREVIATION DEFINITION Subscriber Identification Module Server Level Agreement Short Message Service Text to Speech Universal Serial Bus Voltage Common Collector Voltage Input Virtual Protocol Network Wide Area Network WCIF Wide Common Intermediate Format Wired Equivalent Privacy Wired Protected Access...

  • Page 10: Installation

    Read through the sections that follow to complete the installation step by step. Installation is simple, but a professional Safety Vision installer is available to install the SafeDrive-AI-2 device, if desired. Contact Safety Vision technical support for installation assistance at (toll free) 1-800-880-8855 or (direct) 713-929-1164.

  • Page 11: Power Supply Through Discrete Wire

    SAFEDRIVE-AI-2 USER GUIDE (Wiring cont.) Power Supply through Discrete Wire...

  • Page 12: Materials And Tools

    SAFEDRIVE-AI-2 USER GUIDE Materials and Tools The following accessories are included in the SafeDrive-AI-2 package and are required for a successful installation: 1 x SafeDrive-AI-2 • 1 x Bracket • 2 x Bracket bolt • 1 x Socket head wrench •...
  • Page 13 SAFEDRIVE-AI-2 USER GUIDE (Materials and Tools cont.) The following tools are required for the successful installation of a DMS camera, if required: PH2 cross screwdriver – Purpose: Adjust and fix the DMS camera lens to a certain angle (generally •...

  • Page 14: Installing Safedrive

    Safety Vision SD memory cards. Installing the SIM Card and Memory Card(s) Locate the card slot panel on the right side of the SafeDrive-AI-2. Using the Allen wrench, turn the card slot panel counterclockwise to open the panel.

  • Page 15: Selecting The Dvr Installation Area

    SAFEDRIVE-AI-2 USER GUIDE Selecting the DVR installation Area Requirements for installation area of the SafeDrive-AI-2 device: The DVR must be installed with the ADAS camera lens positioned: • (forward facing) ◦ In the middle of the front windshield, in the rearview mirror area above the centerline of the front windshield.

  • Page 16: Installing The Dvr Bracket

    Observe the bubble in the level to determine the inclination angle. Locate the bracket in the SafeDrive-AI-2 package and remove the 3M adhesive film on the bracket’s back side. Using the level as a reference and with the toothed side of the bracket facing left, place the sticky side of the bracket within the target installation area of the windshield.

  • Page 17: Installing The Dvr

    SAFEDRIVE-AI-2 USER GUIDE Installing the DVR Locate the main unit of the DVR assembly. Attach the main unit to the bracket, with the teeth on the left side of the bracket engaged with the teeth of the left inner side of the DVR, as shown in the figure on the left below.

  • Page 18: Installing The Optional Dms Camera

    SAFEDRIVE-AI-2 USER GUIDE Installing the Optional DMS Camera Install the DMS Camera according to the following position, angle, and direction requirements: Position: • ◦ If the A-pillar camera (recommended as DMS in general) is selected, the DMS camera should be installed on the A-pillar on the driver’s side, with the side facing the driver’s face.

  • Page 19: Connecting The Power Supply, Signal Cables, And Wiring

    SAFEDRIVE-AI-2 USER GUIDE Connecting the Power Supply, Signal Cables, and Wiring Power Supply Connection To connect the Power Supply: Based on client preference, connect power through either the SV-AI-OBDII-PWD connection or through the SV-AI-PWR CABLE discrete wire. ◦ If through the SV-AI-OBDII-PWD connection, locate the OBD interface of the vehicle and connect directly with the interface.
  • Page 20 ◦ Connect “SPEED B” to the vehicle ground wire. When the connection is complete, ◦ Log into the Safety Vision DX app on a smart phone or tablet. ◦ Connect the SafeDrive-AI-2 device. ◦ Enter the configuration interface and designate the speed source of the equipment as “Pulse.”...

  • Page 21: Wiring Connection

    Arrange the main cables, concealing them in the interior trim panel or the panel of the dashboard. Affix the power supply box. The SafeDrive-AI-2 device is equipped with a power supply box which has a built-in switch control. The power supply box needs to be fixed in a certain position in the vehicle. Consider the following when choosing the fixed position: ◦...
  • Page 22 SAFEDRIVE-AI-2 USER GUIDE (Connecting the Power Supply, Signal Cables, and Wiring cont.)

  • Page 23: Connecting Safedrive-Ai-2 To The Safety Vision Dx App

    If no connection is established with the app within 2 min, the WiFi hotspot of the DVR will turn off. Press the Panic button twice to re-initiate the WiFi. Log in to the Safety Vision DX app with a smart phone or tablet within 2 minutes of the main unit powering on.

  • Page 24: Calibrating Safedrive

    SAFEDRIVE-AI-2 USER GUIDE Calibrating SafeDrive-AI-2 The SafeDrive-AI-2 has two integrated cameras: The external, forward facing ADAS camera and the internal, cabin facing DSC camera. Users also have the option to add a DMS camera. The sections below detail how to calibrate all three cameras, using the Safety Vision DX app.
  • Page 25 SAFEDRIVE-AI-2 USER GUIDE (ADAS Camera cont.) Select Channel [1], then tap the Calibration button. Verify the recorder installation complies by selecting the check boxes before moving forward, then tap Next. Enter measurements, then tap Next. Use guide as a reference for all measuring points. The ADAS calibration height unit can be centimeters or inches.
  • Page 26 SAFEDRIVE-AI-2 USER GUIDE (ADAS Camera cont.) Next through the next three windows. Verify the prompts in the following window and tap Next. Verify turn signals and tap Complete. This section confirms that the sensors are being detected. When any of the sensors are...

  • Page 27: Dsc Camera

    Double-tap Channel 2 to enlarge the cabin screen. Tilt housing up or down to achieve the desired position so that the feed on the Safety Vision DX app screen appears as follows: ◦ The center of the cabin is in the center of the screen.
  • Page 28 SAFEDRIVE-AI-2 USER GUIDE (DSC Camera cont.) In the window that appears, select DSC. Channel Select Calibration Tap the button. Select the appropriate driver position. Click Save, then click Exit to return to the main page.

  • Page 29: Optional Dms Camera

    SAFEDRIVE-AI-2 USER GUIDE Optional DMS Camera Go to Preferences > Alarm > AI Setup > Algorithm Calibration. Change Channel 2 None Channel 3 to DMS, then tap the Save button. Instruct the driver to sit in the driver’s seat of the vehicle, according to normal driving habits and posture.
  • Page 30 To adjust the angle of the DMS camera left or right, adjust the left and right-angle joints with the hexagonal socket screws until the image of the driver in the Safety Vision DX app is satisfactory. ◦ Ensure the driver’s face appears in the middle of the screen and the lower edge of the screen is below the driver’s chest.
  • Page 31 SAFEDRIVE-AI-2 USER GUIDE (Optional DMS Camera cont.) In the Safety Vision DX app, tap Preview > AI CALI if using an android device. If using an iOS device, Preview > Calibrate. In the window that appears, select for calibration. Channel...
  • Page 32 SAFEDRIVE-AI-2 USER GUIDE (Optional DMS Camera cont.) Confirm the prompts, tapping Next to continue to the next step. Left A-Pillar, Right A-Pillar, Dashboard-front, Dashboard-side Select to determine the installation method for the DMS camera. NOTE: Ensure the correct option is selected, as this step is very important.
  • Page 33 SAFEDRIVE-AI-2 USER GUIDE (Optional DMS Camera cont.) ◦ When the value of reaches 301 in the mode of side installation and side calibration (51 in the mode of front installation and front calibration), the calibration frame will turn from red to blue, indicating the automatic calibration is finished.

  • Page 34: Operation

    If no connection is established with the app within 2 min, the WiFi hotspot of the DVR will turn off. Press the panic button twice to re-initiate WiFi. Log in to the Safety Vision DX app with a smart phone or tablet within 2 minutes of the main unit powering on.

  • Page 35: Logging Out

    SAFEDRIVE-AI-2 USER GUIDE Logging Out Tap the three dots in the upper righthand corner of the screen. A dropdown menu will appear. Logout to log out of the connected device. In the window that appears, tap Confirm.

  • Page 36: Adjusting System Settings - Basic Setup Menu

    (Vehicle Num and Vehicle Plate), and Driver (OMS ID), Info (Driver Number and Driver Name). After setting the vehicle number, the Safety Vision DX app will automatically rename the WiFi hotspot for the device to the vehicle number. Device Info OMS ID: Unique alphanumeric ID assigned to the HVR for identification in the OMS Pro/Foresight Pro •...

  • Page 37: Time Setup

    If the vehicle is not in the time zone where the platform is located, for • normal communication between the SafeDrive-AI-2 and the platform, Cross Time Zone must be enabled. When enabled, select the correct Local Time Zone settings. Time Zone: Select the appropriate time zone.

  • Page 38: Time Sync

    NTP: Select this option to automatically synchronize the date and time to an official time-keeping • website when the SafeDrive-AI-2 has an available internet connection; Select from several predefined websites, or select User-Defined to enter your own. Center Server: Select this option to automatically synchronize the date and time to an OMS Pro/ •...

  • Page 39: Dst

    SAFEDRIVE-AI-2 USER GUIDE Navigate to Preferences > Basic Setup > Time Setup > DST to adjust these parameters, as shown in the following figure. Enable: Select this option to enable Daylight Savings Time (DST) automatic time adjustment • Offset: Select a two hour DST adjustment.

  • Page 40: Start-Up

    SAFEDRIVE-AI-2 USER GUIDE Start-up ON/OFF To view or change information about On/Off Mode, tap Preferences > Basic Setup > Start-up > ON/OFF, as shown in the following figure. ON/OFF Mode: Ignition is the default setting. Powers the device on and off with the vehicle’s ignition.

  • Page 41: Sleep

    SAFEDRIVE-AI-2 USER GUIDE Sleep To view or change information about Sleep Mode, tap Preferences > Basic Setup > Start-up > Sleep, as shown in the following figure. Sleep Mode: Select either Low power standby mode No consumption standby mode. •...

  • Page 42: Wake

    IO Wake: Wakes up SafeDrive-AI-2 by triggering the IO sensor. • G-sensor Wake: Wakes up SafeDrive-AI-2 when the g-force thresholds are exceeded. The default • thresholds for the X, Y, and Z axis are all 5.5g. Remote Wake: Remotely wakes up the SafeDrive-AI-2 by sending commands.

  • Page 43: Power Box

    • box, ACC detects that any axis is greater than the set threshold to determine whether to wake up the SafeDrive-AI-2. The threshold range: 5 to 100 milligrams, 75 milligrams by default. WARNING: For the G-sensor wakeup for smaller vehicles and using the SV-AI-OBDII-PWD to power up the device: The device may not wake up after starting the vehicle due to the minimal vibration of somevehicles, or the device may shut down when the vehicle is idling.

  • Page 44: User Setup

    SAFEDRIVE-AI-2 USER GUIDE User Setup To view or edit users, tap Preferences > Basic Setup > User Setup, as shown in the following figure. User Management: Tap the button to add a new user. • Users: • ◦ admin (Admin): The system has an administrator account by default.

  • Page 45: Network Setup

    Save at the bottom of the screen to save changed entries. The SafeDrive-AI-2 DVR supports 4G SIM cards, which can provide mobile hotspots for mobile terminals such as smart phones and pads for WiFi network transmission. If the user has purchased Safety Vision’s cloud-based data storage service, OMS Pro, Safety Vision will maintain the user’s account and password information.

  • Page 46: Local

    SAFEDRIVE-AI-2 USER GUIDE Local To view or change local information, tap Preferences > Basic Setup > Network > Local, as shown in the following figure. Enable IPV4: After Enable IPV4 is selected, the corresponding parameter setting screen is displayed: •...

  • Page 47: Wifi

    AP Mode switch button, you can switch the device to AP Mode with the button. After the switch, if the device fails to connect to the Safety Vision DX app within 2 minutes, the device will exit AP Mode and the module will enter Sleep Mode.)

  • Page 48: Communication Module

    SAFEDRIVE-AI-2 USER GUIDE Communication Module To view or change communication settings, tap Preferences > Basic Setup > Network > Communication Module, as shown in the following figure. Lock: When enabled, the settings will not change when importing the configuration file.

  • Page 49: Bluetooth

    SAFEDRIVE-AI-2 USER GUIDE Bluetooth (Under development) Ports To view or change port settings, tap Preferences > Basic Setup > Network > Ports. WEB Port: Default 80. This port is used for IE access. • RTSP Port: Default 554. After entering the correct username and password, configure a fixed IP •...

  • Page 50: Application

    SAFEDRIVE-AI-2 USER GUIDE Application FTP Server To view or change FTP Server settings, tap Preferences > Basic Setup > Application > FTP Server, as shown in the following figure. After the IP address, port number, username, and password of the established FTP service are configured, the Safe Drive-AI-2 device can connect to the FTP server to upload snapshots or download files.

  • Page 51: Download

    SAFEDRIVE-AI-2 USER GUIDE Download The Auto Download Reconnect feature can only be used with the OMS Pro/Foresight Pro platform. Tap Preferences > Basic Setup > Application > Download, as shown in the following figure. Auto Download Reconnect: Select this option to enable the device to reconnect automatically if a •...

  • Page 52: Voice Setup

    SAFEDRIVE-AI-2 USER GUIDE Voice Setup To manually set the volume of the preview voice and TTS voice, tap Preferences > Basic Setup > Voice Setup as shown in the following figure. Save at the bottom of the screen to save changed entries.

  • Page 53: Video Setup Menu

    SAFEDRIVE-AI-2 USER GUIDE Video Setup Menu Live View Preview To set preferences for previewing video feeds, tap Preferences > Video Setup > Live View > Preview, as shown in the following figure. Startup Screen: The live view preview after the device is started. Can be set as...

  • Page 54: Record

    SAFEDRIVE-AI-2 USER GUIDE Record General To specify the system mode, overwrite function, lock duration, pre-recording, and SD record mode, tap Preferences > Video Setup > Record > General, as shown in the following figure. System: PAL and NTSC are available.
  • Page 55 SAFEDRIVE-AI-2 USER GUIDE (General cont.) Pre-recording: • ◦ In alarm recording, recording files generated before alarm triggering are extracted for event analysis. The parameter value ranges from 1 to 60 minutes and is defaulted to 15 minutes. ◦ In normal video recording, when an alarm is triggered, earlier recording data with a duration indicated by this parameter is extracted and marked as an alarm recording as well.
  • Page 56 SAFEDRIVE-AI-2 USER GUIDE (General cont.) SDRecord Mode: Specifies the secondary Micro SD card’s recording mode. Available values are Sub- • Record, Mirror Record, Alarm Backup, and Loop-Record. ◦ Sub-Record: Sub-stream recordings are stored in the SD card. ◦ Mirror Record: Mirrored record uses main stream parameters, which include video data, log information, and black box data.

  • Page 57: Main Stream

    Select the recording video resolution. (resolution ranked in ascending order, “W” indicated • “wide”) NOTE: Resolution of the ADAS channel (channel 1) of SafeDrive-AI-2 can be up to 1920P. Frame Rate: Select between 1 and 30 frames per second. •...
  • Page 58 SAFEDRIVE-AI-2 USER GUIDE (Main Stream cont.) Timer setup Tap the menu icon to the right of Timer to navigate to the Schedule screen shown below. Tap the menu icon under Edit to a specific day to add a recording plan.

  • Page 59: Sub Stream

    SAFEDRIVE-AI-2 USER GUIDE Sub Stream To set the sub-stream video and audio recording parameters for each channel, tap Preferences > Video Setup > Record > Sub Stream, as shown in the following figure. Enable: Sub-stream recording is enabled for a specific channel after this option is selected.

  • Page 60: Record Osd

    SAFEDRIVE-AI-2 USER GUIDE Record OSD Preferences > Video Setup > Record > Record OSD to select which pieces of metadata appear overlaid on recorded video. Position: Where the metadata appears overlaid relative to its position on the screen can be adjusted.

  • Page 61: Ip Camera Setup

    Onvif: Allows users to enable IP cameras external to the channels and search and allocate channels for them. Additionally, the IP address of the IP cameras can be modified. Onvif cameras are not currently supported by Safety Vision firmware. NOTE: This feature is under development.

  • Page 62: Camera Setup

    SAFEDRIVE-AI-2 USER GUIDE Camera Setup To flip, mirror, and rotate the cameras in all channels, tap Preferences > Video Setup > Camera Setup, as shown in the following figure. On the lower left corner of the screen, select the target channel to set the rotating angle of the camera in...

  • Page 63: Data Setup Menu

    SAFEDRIVE-AI-2 USER GUIDE Data Setup Menu General Serial Port To view or edit serial ports, tap Preferences > Data Setup > General > Serial Port, as shown in the following figure. Serial Port: The Serial Port tab configures which devices are connected to the serial port. For each connection, select which device is connected (None, Power Extend, Control Panel, External GPS, AI-Gauge) and the frequency for each.

  • Page 64: Speed

    SAFEDRIVE-AI-2 USER GUIDE Speed To view or edit speed, tap Preferences > Data Setup > General > Speed, as shown in the following figure. Unit: or KM/H. Select either • Source: Options include Satellite, Mis, OBD, or CAN. • ◦...

  • Page 65: Location

    SAFEDRIVE-AI-2 USER GUIDE Location To enter the GPS Report Strategy setting screen, tap Preferences > Data Setup > General > Location. Select different modes to upload GPS signals according to market demands. Based on ACC status, the GPS upload mode includes constant upload, variable upload, and sleep upload.

  • Page 66: Mileage

    SAFEDRIVE-AI-2 USER GUIDE Mileage To enter the milage setting screen, tap Preferences > Data Setup > General > Mileage. On the screen, basic mileage values can be set, corrected, or cleared, as shown in the following figure. A-GPS (Under development)

  • Page 67: Snap Setting

    SAFEDRIVE-AI-2 USER GUIDE Snap Setting The Snap Setting menu configures the snapshot feature. Still image snapshots can be taken at set intervals, instead of full motion video, in order to conserve storage space in certain applications. Time Snap Use the Time Snap menu to configure snapshots to be taken during set intervals. Tap Preferences >...

  • Page 68: Trigger Snap

    SAFEDRIVE-AI-2 USER GUIDE Trigger Snap Use the Trigger Snap menu to configure snapshots to be taken during alarms or manually. Tap Preferences > Data Setup > Snap Setting > Trigger Snap. Tap the Setup button. The Snap Link Setting window is displayed.

  • Page 69: Distance Snap

    SAFEDRIVE-AI-2 USER GUIDE Distance Snap Use the Distance Snap menu to configure snapshots to be taken after a certain amount of distance. Tap Preferences > Data Setup > Snap Setting > Distance Snap. Distance Interval: Enter the amount of distance, in miles, that the device will capture snapshots.

  • Page 70: Barcode

    SAFEDRIVE-AI-2 USER GUIDE Barcode (Under development)

  • Page 71: Alarm Setup Menu

    SAFEDRIVE-AI-2 USER GUIDE Alarm Setup Menu The Alarm menus configure the various alarms and their triggers. Base IO Alarm Preferences > Alarm > Base > IO Alarm, as shown in the following figure. Enable Select next to each sensor to enable IO alarms. An alarm is triggered when the sensor is •...
  • Page 72 SAFEDRIVE-AI-2 USER GUIDE (IO Alarm cont.) IO Trigger Setup Tap the Setup button under the Trigger field to display the setup screen to configure the parameters specific to the IO Alarm for each selected sensor. Trigger Source: Select either Source Voltage Source Pulse.
  • Page 73 SAFEDRIVE-AI-2 USER GUIDE (IO Alarm cont.) IO Linkage Setup Tap the Setup button under Linkage to display the setup screen to configure the recording, monitor display, and additional options specific to the IO Alarm. Channel: Select the channels that are recorded for the duration of this alarm.

  • Page 74: Speed Alarm

    SAFEDRIVE-AI-2 USER GUIDE Speed Alarm Preferences > Alarm > Base > Speed Alarm, as shown in the following figure. Enable: Select this option to enable speed alarms. An alarm is triggered when the configured speed is • exceeded. Alarm Type:...
  • Page 75 SAFEDRIVE-AI-2 USER GUIDE (Speed Alarm cont.) Overspeed Linkage Setup Tap the Setup button under Linkage to display the setup screen to configure the recording, monitor display, and additional options specific to the Overspeed Alarm. Channel: Select the channels that are recorded for the duration of this alarm.

  • Page 76: Panel Alarm

    Trigger field to display the setup screen to configure the parameters specific to the Panel Alarm. Any key: Enter a time (between 1 and 255 seconds) that the panic button on the SafeDrive-AI-2 must • be pressed and held down for to trigger the alarm.
  • Page 77 SAFEDRIVE-AI-2 USER GUIDE (Panel Alarm cont.) Panic Linkage Setup Tap the Setup button under Linkage to display the setup screen to configure the recording, monitor display, and additional options specific to the Panel Alarm. Channel: Select the channels that are recorded for the duration of this alarm.

  • Page 78: Gps Alarm

    SAFEDRIVE-AI-2 USER GUIDE GPS Alarm Preferences > Alarm > Base > GPS Alarm, as shown in the following figure. Enable: Select this option to enable GPS alarms. An alarm is triggered when GPS signals are lost. • Alarm Type: Select either Sensor •...
  • Page 79 SAFEDRIVE-AI-2 USER GUIDE (GPS Alarm cont.) GPS Alarm Linkage Setup Setup Tap the button under Linkage to display the setup screen to configure the recording, monitor display, and additional options specific to the GPS Alarm. Channel: Select the channels that are recorded for the duration of this alarm.

  • Page 80: Driver Sign-On Key Setup

    SAFEDRIVE-AI-2 USER GUIDE Driver Sign-on Key setup (Under development)

  • Page 81: Video

    SAFEDRIVE-AI-2 USER GUIDE Video Video Loss Preferences > Alarm > Video > Video Loss, as shown in the following figure. Enable: Select this option to enable video loss alarms. An alarm is triggered whenever video loss or • camera failure is detected.
  • Page 82 SAFEDRIVE-AI-2 USER GUIDE (Video Loss cont.) Video Loss Linkage Setup Tap the Setup button under Linkage to display the setup screen to configure the recording, monitor display, and additional options specific to the Video Loss Alarm. Channel: Select the channels that are recorded for the duration of this alarm.

  • Page 83: Cover

    SAFEDRIVE-AI-2 USER GUIDE Cover Preferences > Alarm > Video > Cover, as shown in the following figure. Enable: Select this option to enable cover alarms. An alarm is triggered whenever a camera lens is • covered or otherwise obstructed. Alarm Type:...
  • Page 84 SAFEDRIVE-AI-2 USER GUIDE (Cover cont.) Cover Trigger Setup Tap the Setup button under the Trigger field to display the setup screen to configure the parameters specific to the Cover Alarm. Channel: Select which channels the Cover alarm will be applied to.
  • Page 85 SAFEDRIVE-AI-2 USER GUIDE (Cover cont.) Cover Linkage Setup Tap the Setup button under Linkage to display the setup screen to configure the recording, monitor display, and additional options specific to the Cover Alarm. Channel: Select the channels that are recorded for the duration of this alarm.

  • Page 86: Privacy Mode

    SAFEDRIVE-AI-2 USER GUIDE Privacy Mode Privacy Mode is a feature designed to provide drivers with privacy when not operating the vehicle. To set up Privacy Mode, tap Preferences > Alarm > Video > Privacy Mode, as shown in the following figure.

  • Page 87: Advanced

    Pass-through of 100HZ G-sensor data is supported. Select/deselect to enable/ • disable this function. Self checking: Displays the monitoring status of the G-sensor. • Integrated navigation: When enabled, the SafeDrive-AI-2 will detect ACCEL2 alarms through the • inertial navigation module. ◦ Select Vehicle Model: Select either Small,...
  • Page 88 SAFEDRIVE-AI-2 USER GUIDE (Driver Behavior Alarm cont.) ACCEL2 Trigger Setup Tap the Setup button under the Trigger field to display the setup screen to configure the parameters specific to the ACCEL2 Alarm. Enable: Select enable next to the conditions that will trigger the ACCEL2 Alarm (Harsh Braking, Hard •...
  • Page 89 SAFEDRIVE-AI-2 USER GUIDE (Driver Behavior Alarm cont.) ACCEL2 Linkage Setup Tap the Setup button under Linkage to display the setup screen to configure the recording, monitor display, and additional options specific to the ACCEL2 Alarm. Channel: Select the channels that are recorded for the duration of this alarm.

  • Page 90: Geo-Fence Alarm

    SAFEDRIVE-AI-2 USER GUIDE Geo-Fence Alarm Preferences > Alarm > Advanced > Geo-Fence, as shown in the following figure. Select either Area I/O Alarm Switch, Line I/O Switch, or both options, to activate an alarm when the • indicated geo-fence is breached.

  • Page 91: Ai Setup

    SAFEDRIVE-AI-2 USER GUIDE AI Setup ADAS Alarm Preferences > Alarm > AI Setup > ADAS, as shown in the following figure. The AI functions of the ADAS alarm include LDW, FCW, Overspeed HMW, PCS, (under development), Rolling Stop (under development).
  • Page 92 SAFEDRIVE-AI-2 USER GUIDE (ADAS Alarm cont.) ADAS Trigger Setup Tap the Setup button under the Trigger field to display the setup screen to configure the parameters specific to the ADAS Alarm. NOTE: Some of the AI functions of the ADAS alarm will not contain all the parameters listed below.
  • Page 93 SAFEDRIVE-AI-2 USER GUIDE (ADAS Alarm cont.) ADAS Linkage Setup Tap the Setup button under Linkage to display the setup screen to configure the recording, monitor display, and additional options specific to the ADAS Alarm. Channel: Select the channels that are recorded for the duration of this alarm.
  • Page 94 SAFEDRIVE-AI-2 USER GUIDE (ADAS Alarm cont.) ADAS Alarm Capture Setup Tap the Setup button under Alarm Capture to configure the snapshot settings specific to the ADAS alarm. Capture Mode: Select either Single Capture or Cycle Capture. • ◦ Single Capture: If selected, the device captures a single image each time and repeats the operation after a specified time period.

  • Page 95: Dms/Dsc Alarm

    SAFEDRIVE-AI-2 USER GUIDE DMS/DSC Alarm Preferences > Alarm > AI Setup > DMS/DSC, as shown in the following figure. The AI functions of the DMS/DSC alarm include Driver Fatigue, No Driver, Handheld Devices (Phone calls), Smoking, Distraction, Yawn, and Seatbelt.
  • Page 96 SAFEDRIVE-AI-2 USER GUIDE (DMS/DSC Alarm cont.) DMS/DSC Trigger Setup - (No Driver, Handheld Devices, Smoking, and Yawn) Tap the Setup button under the Trigger field to display the setup screen to configure the parameters specific to the DMS/DSC Alarm. NOTE: Some of the AI functions of the DMS/DSC alarm contain additional parameters, see different sections listed below.
  • Page 97 SAFEDRIVE-AI-2 USER GUIDE (DMS/DSC Alarm cont.) DMS/DSC Trigger Setup - (Driver Fatigue) NOTE: The following are additional parameters available for the Driver Fatigue AI function. Close eyes frequently: Select this option to enable this function, then enter the amount of time in the •...
  • Page 98 SAFEDRIVE-AI-2 USER GUIDE (DMS/DSC Alarm cont.) DMS/DSC Trigger Setup - (Seatbelt) NOTE: The following are additional parameters available for the Seatbelt AI function. Alarm mode: Select either Normal mode or Regular inspection mode. • ◦ Regular inspection mode: Will inspect for seatbelt at the set interval time entered in the inspection interval field.
  • Page 99 SAFEDRIVE-AI-2 USER GUIDE (DMS/DSC Alarm cont.) DMS/DSC Alarm Capture Setup Tap the Setup button under Alarm Capture to configure the snapshot settings specific to the DMS/DSC alarm. Capture Mode: Select either Single Capture or Cycle Capture. • ◦ Single Capture: If selected, the device captures a single image each time and repeats the operation after a specified time period.

  • Page 100: Bsd Alarm

    SAFEDRIVE-AI-2 USER GUIDE BSD Alarm Preferences > Alarm > AI Setup > BSD, as shown in the following figure. The AI functions of the BSD alarm include Right blind spot detection, Left blind spot detection, Front Blind Area (under development), and Rear blind spot (under development).
  • Page 101 SAFEDRIVE-AI-2 USER GUIDE (BSD Alarm cont.) BSD Trigger Setup Tap the Setup button under the Trigger field to display the setup screen to configure the parameters specific to the BSD Alarm. Alarm Speed Range: Enter the speed range for the alarm.
  • Page 102 SAFEDRIVE-AI-2 USER GUIDE (BSD Alarm cont.) BSD Alarm Capture Setup Tap the Setup button under Alarm Capture to configure the snapshot settings specific to the BSD alarm. Capture Mode: Select either Single Capture or Cycle Capture. • ◦ Single Capture: If selected, the device captures a single image each time and repeats the operation after a specified time period.

  • Page 103: Calibration Parameter

    SAFEDRIVE-AI-2 USER GUIDE Calibration Parameter Preferences > Alarm > AI Setup > Calibration Parameter, as shown in the following figure. The unit of ADAS Camera Install Height can either be centimeters or inches. If centimeters are selected, the value range is 50 to 400 centimeters and the default value is 153 centimeters. If inches are selected, the value range is 20 to 157 inches and the default value is 59 inches.

  • Page 104: Alarm Notifications

    AI Alarm Voice Enable: Select or deselect this option to enable or disable the alarm voice function. If • this option is selected, the SafeDrive-AI-2 will play the alarm voice when an alarm is triggered. AI-Gauge Brightness: Select either Manual Mode to manually enter the brightness level of the AI •...

  • Page 105: Algorithm Calibration

    SAFEDRIVE-AI-2 USER GUIDE Algorithm Calibration Preferences > Alarm > AI Setup > Algorithm Calibration, as shown in the following figure. When using the built in ADAS and DSC cameras of the SafeDrive-AI-2, ensure Channel 1 is set to ADAS Channel 2 is set to DSC.

  • Page 106: Playing Back Recorded Videos

    SAFEDRIVE-AI-2 USER GUIDE Playing Back Recorded Videos Video Playback The Playback screen allows users to search for the main-stream video/sub-stream video in the main storage/sub-storage on a certain date. To view this playback: On the Playback screen, select a date from the calendar for video playback. On the left part of the screen are options to select the year and month.
  • Page 107 SAFEDRIVE-AI-2 USER GUIDE (Video Playback cont.) On the displayed screen, select the channel of the video to be viewed. The date and type of video may also be re-selected on this screen. Then tap Next. Drag the timeline to select the playback time.

  • Page 108: Video Export

    SAFEDRIVE-AI-2 USER GUIDE Video Export The Safety Vision DX app also allows users to export the video of the selected time period. Attach a USB drive to the cable provided in the SafeDrive-AI-2 kit. Plug the cable into the SafeDrive-AI-2 USB port.
  • Page 109 To unlock the video of the selected time period, tap Unlock. At this time, the backup will load to the USB drive. When the backup is complete, remove the USB drive from the SafeDrive-AI-2. NOTE: Exported proprietary video can be played back in Foresight Pro. MP4 video files can be played through...

  • Page 110: Viewing General Device Information

    SAFEDRIVE-AI-2 USER GUIDE Viewing General Device Information On the General screen, you can view the real-time status of the device, import/export parameters, logs, and other files, as well as upgrade the software. Basic Info Basic Info: Shows the server connection status, IO level status and use, OBD data, G-Sensor data, ACC...
  • Page 111 SAFEDRIVE-AI-2 USER GUIDE (Basic Info cont.)
  • Page 112 SAFEDRIVE-AI-2 USER GUIDE (Basic Info cont.)

  • Page 113: Device Module

    SAFEDRIVE-AI-2 USER GUIDE Device Module Device Module: Shows the status of the WiFi, 3G/4G, and positioning modules of the device.

  • Page 114: Storage Device

    GPS, or power box. A USB adapter cable is required to connect to a USB flash drive or the Safety Vision DX app with the SD card for the upgrade. To upgrade the required item, tap the arrow...

  • Page 115: Other

    Other: Allows importing/exporting O&M logs, restoring default settings, and rebooting the device. A USB adapter cable is required to connect to a USB flash drive or the Safety Vision DX app with the SD card for data import/export operations. This section of the app also allows for logging into the device to perform the following operations: Export Alarm Log •...

  • Page 116: Appendix A: Specifications

    SAFEDRIVE-AI-2 USER GUIDE Appendix A: Specifications IMAGE SENSOR LOUD SPEAKER FRONT (ADAS): 1/2.7” 5 MP CMOS Built-in speaker, IN-CABIN (DSC): 1/2.9” 2 MP CMOS Power: 3W, with adjustable volume, < 70dB at 1m distance RESOLUTION FRONT: 5MP (2560 x 1920)

  • Page 117: Client Support

    SAFEDRIVE-AI-2 USER GUIDE CLIENT SUPPORT The Client Support team serves as the voice of Safety Vision; ensuring an optimal experience through the entire client relationship. They interact with every department in the company to accommodate your needs and deliver on every inquiry or request. Whether you want to place an order, would like more information on a product, or anything in between;...
  • Page 118 6100 W. SAM HOUSTON PKWY. N. HOUSTON, TX 77041-5113 MAIN: 713.896.6600 TOLL FREE: 800.880.8855 SAFETYVISION.COM Copyright © 2025 Safety Vision, LLC All Rights Reserved.

Table of Contents