cable matters 201160 Installation And Troubleshooting

Cable Matters 4-Port USB-A & USB-C Switch with Remote Control
(201160) – Installation and Troubleshooting
The Cable Matters 4-Port USB-A & USB-C Switch with Remote Control allows users to share two USB-A and two USB-C
peripheral devices between two computers. The device enables fast data transfer at 10Gbps and provides seamless
switching via remote control or physical buttons on the unit.
4-Port USB-A & USB-C Switch with Remote Control
Important Notes Before Using
No Video Support: This device is designed for data transfer only and does not support video output.
No Host Charging: The switch does not charge the connected computers.
Ensure the Power Button is ON: The switch must be powered on to function correctly. The power
switch is on the side of the unit.
Setup Guidance
1. Unbox and Inspect: Ensure all package contents are included:
1x USB-A & USB-C Switch
2x USB-C to USB-C 10Gbps data-only cables
1x Remote Control with Battery
2x Hook-and-Loop Strips
1x User Manual
2. Connection Instructions:
Step 1: Power off all source equipment before connecting.
Step 2: Make sure the switch is turned OFF before connecting any devices.
Step 3: Use the provided USB-C to USB-C cables to connect up to two computers to the switch.
Step 4: Connect up to four USB peripherals (USB-A or USB-C) to the corresponding ports.
Step 5: Turn the switch ON and confirm that the LED indicator lights up.
3. Remote Control Setup:
Remove the battery insulation tab before first use.
Ensure the remote is paired (by default, it comes pre-paired).
If the remote does not work, try replacing the battery or repairing the remote.
(201160)