Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for cable matters 201063
Summary of Contents for cable matters 201063
-
Page 1: User Manual
USB-C™ 3.1 Gen 2 Mul�port Hub Model 201063 USB-A 3.1 Gen 2 Mul�port Hub Model 202063 with USB, UHS-II SD Card Reader & SATA 3.0 Check for troubleshoo�ng & Thunderbolt 3 driver informa�on at: kb.cablema�ers.com User Manual support@cablema�ers.com... -
Page 2: Copyright And Trademarks
USB Type-C™ and USB-C™ are trademarks of USB Implementers Forum Package Contents Please check that the following items are contained in the package: • 1x USB-C Gen 2 Mul�port Hub (Model 201063) • 1x USB-A Gen 2 Mul�port Hub (Model 202063) • 1x AC Power Adapter... -
Page 3: Product Features
Product Descrip�on The Cable Ma�ers® USB-C 3.1 Gen 2 Mul�port Hub supports mul�ple formats to transfer and back-up files from your computer with USB-A or USB-C/Thunderbolt 3. Connect an external hard drive or flash drive with USB-A or USB-C, transfer files from a microSD or SD card and back-up important data to a high-capacity SATA hard drive. -
Page 4: System Requirements
System Requirements √ Host 201053: USB-C/Thunderbolt 3 computer port (OS independent) √ Host 202053: USB-A computer port (OS independent) √ USB-A 3.1 Port: USB cable or device √ USB-C 3.1 Port: USB-C cable or device √ UHS-II SD Card Reader: SD/SDHC/SDXC, UHS-I or UHS-II √... - Page 5 Connec�ng the Mulitport Hub to the Host 1) Directly connect the Hub to a USB-C/Thunderbolt 3 or USB-A port of the computer 2) Connect the AC power adapter BEFORE connec�ng any devices to the Hub (AC power is op�onal) 3) Check that the blue LED on the top of the Hub is lit Notes: •...
- Page 6 Connec�ng an SD Memory Card 1) Insert an SD card into the microSD or SD card reader port 2) SD card should be recognized a�er downloading any needed drivers 3) Always Safely Remove or Eject the SD card before removing Notes: •...
- Page 7 Ini�alizing & Forma�ng a SATA drive in Windows 1) Connect the AC power and the SATA drive. Check that the Hub LED is lit. 2) Search for Create and format hard disk partitions 3) Open the Disk Management u�lity 4) Click OK in the Initialize Disk menu to ini�alize the SSD (Right-click to open the menu, if needed) 5) Right-click on the Unallocated Disk to open and select the New Simple Volume...
- Page 8 Windows Simple Volume Wizard Use the Simple Volume Wizard to perform the following func�ons: • Par��on a drive • Format a drive • Change the drive le�er • Shrink a par��on • Delete a par��on • Change a drive file system type •...
- Page 9 Ini�alizing & Forma�ng a SATA drive in macOS 1) Connect the Hub to AC power and to your computer 2) Check that the LED on the Hub is lit 3) Select Initialize, when prompted (or open Finder > Utilities > Disk Utility) 4) Click Erase and provide a Name, File Format, and par��on Scheme...
- Page 10 Troubleshoo�ng Tips • Unplug the Hub, reboot the computer and then reconnect • Check that the USB-A/USB-C host port supports USB 3.1 Gen 2 10Gbps • Check that the LED on the Hub is lit • If any device is not recognized without the AC power, unplug the device, connect the AC power, and re-connect the Hub and device •...
-
Page 11: Warranty Informa�On
Technical Specifica�ons Host Connector (Model 201063)..USB-C 3.1 Gen 2 Cable Host Connector (Model 202063)..USB-A 3.1 Gen 2 Cable USB-A 3.1 Port........Gen 2 10Gbps USB-C 3.1 Port........Gen 2 10Gbps SD Card Reader Port......Supports SDHC/SDXC/UHS-I/UHS-II microSD Card Reader Port....Supports SDHC/SDXC/UHS-I SATA HDD Drive Connector....(7+15) Power & Data Receptacle Hub Housing (LxWxH)......3.5 x 2.3 x 0.6 Inches... - Page 12 View other USB-C™ products at www.cablema�ers.com Model 201020 Model 201042 USB-C 3-Port Hub with Ethernet 72W 4-Port USB-Charger Model 201046 Model 201058 USB-C to DisplayPort Mul�port USB-C SD Card Reader Adapter with 60W PD...