Cisco WS-C2940-8TT-S Hardware Installation Manual page 38

Installing the Switch
Figure 2-3
2
1 Desktop
2
Screw template
3
Screws
Peel the adhesive strip off the bottom of the screw template, and attach it to the underside of the desk.
Step 3
Use a 0.144-inch (3.7 mm) or a #27 drill bit to drill a 1/2 inch (12.7 mm) hole in the two screw
Step 4
template slots.
Insert three screws in the slots on the screw template, and tighten until they touch the top of the screw
Step 5
template.
Remove the screw template from underneath the desk.
Step 6
Catalyst 2940 Switch Hardware Installation Guide
2-8
Installing the Mounting Screws Under a Desk
1
3
4 Adhesive
5
Wall
4
3
Chapter 2 Installation
5
OL-6157-01