Page 1
Direct Driven Single Stage Compressor Instruction & Parts Manual This manual contains important safety information and must be carefully read in its entirety and understood prior to installation by all personnel who install, operate and/or maintain this product. On-line product registration, parts ordering and warranty information is available at www.quincycompressor.com Manual No.
Page 2
WARNING Improper and unsafe use of this compressor can result in death, fire and/or serious bodily injury! Instruction manual contains important information about product safety. Please read and understand instruction manual before operating the compressor. Please keep instruction manual available for others before they use the compressor. English - CONTENETS - Page...
Page 3
English IMPORTANT INFORMATION Read and understand all of the operating instructions, safety precautions and warnings in this instruction manual before operating or maintaining this compressor. Most accidents that result from compressor operation and maintenance are caused by the failure to observe basic safety rules or precautions.
Page 4
SAFETY IMPORTANT SAFETY INSTRUCTION FOR USE THE COMPRESSOR WARNING: Death or serious bodily injury could result from improper or unsafe use of compressor. To avoid these risks, follow these basic safety instructions: READ ALL INSTRUCTIONS 1. NEVER TOUCH MOVING PARTS. liquids or gases.
Page 5
28. DO NOT DIRECT AIR STREAM AT BODY. 18. HANDLE COMPRESSOR CORRECTLY. Risk of injury, do not direct air stream at persons or animals, to avoid Operate the compressor according to the instructions provided any bodily injury. herein. Never allow the compressor to be operated by children, 29.
Page 6
SAFETY - Continued GROUNDING INTRUCTIONS This compressor should be grounded while in use to protect the operator from electric shock. The compressor is equipped with a three-conductor cord and three-prong grounding type plug to fit the proper grounding type receptacle. The green (or green and yellow) conductor in the cord is the grounding wire.
Page 7
Knob of the pressure Drain cap reducer Rubber bumper Quick couplet (air outlet) SPECIFICATIONS Compressor Model Q1214TS Motor Single-phase, induction motor Power source Single-phase, 120V AC 60 Hz Output power 1.5 HP Current 15.0 A Tank Capacity 2 x 2 gal. (15.1 ltr)
Page 8
ACCESSORY Accessory other than these shown below can lead WARNING to malfunction and resulting injuries. Cylinder STANDARD ACCESSORY Plastic cap Dipstick……………......1 APPLICATIONS Air source of the pneumatic nailer and stapler. WARNING Never use compressor for applications Fig. 3 other than compressor for pneumatic nailer and stapler.
Page 9
TRANSPORT Pressure gauge Knob of the (A) indicates the pressure reducer Push the knob of the pressure switch to “OFF” and disconnect it pressure in the from the power source before move compressor. air tank Transport the compressor in the correct manner. CAUTION Keep the balance while transporting.
Page 10
CAUTION Overfilling with oil will cause premature (1) Push the pressure switch knob to the “OFF” position and compressor failure. Do not overfill. disconnect the plug from the receptacle (Fig. 2). (2) Push the pressure switch knob to the “OFF” position and (1) Within the first 50 hours of operation, completely replace the oil disconnect the plug from the receptacle (Fig.
Need help?
Do you have a question about the Q1214TS and is the answer not in the manual?
Questions and answers