Removing And Installing The Side Window - Chevrolet TRACKER 2003 Manual

~~ ~~~~
4.
Hang the rear window down so it hangs outside of
5.
Pull the rear window frame bar rearward (see
the vehicle.
illustration above). Then slide the bar to the left
to remove the window.
Reverse the steps to install the rear window. Make sure
that all the hook and loop fastener strips and flaps
are correctly fastened and overlapped. Make sure that
the window is completely closed before driving.
Removing and Installing the Side
Window
To remove the side window do the following:
1. Release the tension in the canvas top support
arms. Unfasten the hook and loop fastener
strips on the top and rear quarter of the side
window.
2. Unzip the zipper almost all the way, leaving about
3 inches (8 cm) of it still zipped and unfasten the
hook and loop fastener strips on the inside of
the window.
2-40