Table of Contents
Advertisement
One-Piece Front 7h-n Signal Lamp Assembly
1. Remove the headlamp assembly .as shown. under
"One-Piece Composite Headlamp System" earlier
in
this section.
5. Turn the bulb assembly to.the left to remove
it.
6 . Put the new bulb assembly into the headlamp
assembly and turn it to the right until it is tight.
7. Plug in the dectrical connector.
8. Put. the headlamp lens assembly back into the
vehicle. Install the two retaining clips.
2. Twist the bulb socket to-
remove
it
from
the
headlamp assembly.
3. Pull the bulb straight out to remove it from
4. Push the new bulb into-the socket until
it
snaps
the socket.
into place.
5. Put the bulb socket-into the lamp assembly arid twist
it to the right until it is tight.
6.
Put the headlamp assembly back into the vehicle.
Install the twwetainhg clips.
Hide quick links:
Advertisement
Table of Contents
