Download Print this page

Chevrolet Silverado 2004 Owner's Manual

Chevrolet Silverado 2004 Owner's Manual

Hide thumbs Also See for Silverado 2004:

Owner's manual (574 pages)

,

Getting to know manual (16 pages)

page of 584

/ 584
Contents
Table of Contents
Bookmarks

Table of Contents

Advertisement

Quick Links

Download this manual

2004 Chevrolet Silverado Owner Manual

Seats and Restraint Systems ........................... 1-1

Front Seats

............................................... 1-3

Rear Seats

............................................... 1-9

Safety Belts

............................................. 1-10

Child Restraints

....................................... 1-32

Air Bag Systems

...................................... 1-67

Restraint System Check

Features and Controls ..................................... 2-1

Keys

........................................................ 2-3

Doors and Locks

....................................... 2-8

Windows

................................................. 2-17

Theft-Deterrent Systems

Starting and Operating Your Vehicle

Mirrors

.................................................... 2-55

®

OnStar

System

...................................... 2-65

Storage Areas

......................................... 2-67

Vehicle Personalization

Instrument Panel ............................................. 3-1

Instrument Panel Overview

Climate Controls

...................................... 3-20

Warning Lights, Gages, and Indicators

Driver Information Center (DIC)

Audio System(s)

....................................... 3-72

............................ 1-84

............................ 2-20

........... 2-22

............................. 2-70

.......................... 3-4

........ 3-33

.................. 3-53

Driving Your Vehicle ....................................... 4-1

Your Driving, the Road, and Your Vehicle

Towing

................................................... 4-52

Service and Appearance Care .......................... 5-1

Service

..................................................... 5-3

Fuel

......................................................... 5-5

Checking Things Under the Hood

All-Wheel Drive

........................................ 5-58

Rear Axle

............................................... 5-59

Four-Wheel Drive

..................................... 5-60

Noise Control System

Bulb Replacement

Windshield Wiper Blade Replacement

Tires

...................................................... 5-74

Appearance Care

Vehicle Identiﬁcation

Electrical System

.................................... 5-123

Capacities and Speciﬁcations

Maintenance Schedule ..................................... 6-1

Maintenance Schedule

Customer Assistance and Information .............. 7-1

Customer Assistance and Information

Reporting Safety Defects

Index .................................................................1

M

............... 5-12

............................... 5-61

.................................... 5-63

......... 5-73

................................... 5-114

............................... 5-122

................... 5-132

................................ 6-2

........... 7-2

........................... 7-10

..... 4-2

Table of Contents

Advertisement

Chapters

Table of Contents

Need help?

Need help?

Do you have a question about the Silverado 2004 and is the answer not in the manual?

Questions and answers

Summary of Contents for Chevrolet Silverado 2004

Page 1 2004 Chevrolet Silverado Owner Manual Seats and Restraint Systems ......1-1 Driving Your Vehicle ........4-1 Front Seats Your Driving, the Road, and Your Vehicle ..........1-3 ..4-2 Rear Seats ..........1-9 Towing ........... 4-52 Safety Belts ..........1-10 Service and Appearance Care ......
Page 2: How To Use This Manual
P.O. Box 07130 Detroit, MI 48207 GENERAL MOTORS, GM, the GM Emblem, How to Use This Manual CHEVROLET, the CHEVROLET Emblem and the name SILVERADO are registered trademarks of General Many people read the owner manual from beginning to Motors Corporation.
Page 3 Safety Warnings and Symbols You will also ﬁnd a circle with a slash through it in this book. This safety There are a number of safety cautions in this book. We symbol means “Do Not,” use a box and the word CAUTION to tell about things “Do Not do this”...
Page 4: Vehicle Symbols
Vehicle Damage Warnings Vehicle Symbols Also, in this manual you will ﬁnd these notices: The vehicle has components and labels that use symbols instead of text. Symbols are shown along with Notice: These mean there is something that could the text describing the operation or information damage your vehicle.
Page 5 These are some examples of symbols that may be found on the vehicle:...
Page 6: Model Reference
Model Reference This manual covers these models: ® Extended Cab Pickup Regular Cab Pickup Crew Cab Chassis Cab...
Page 7: Seats And Restraint Systems
Section 1 Seats and Restraint Systems Front Seats ............1-3 Child Restraint Systems .........1-38 Manual Seats ..........1-3 Where to Put the Restraint ......1-41 Power Seats ..........1-4 Top Strap ............1-42 Power Lumbar ..........1-5 Top Strap Anchor Location ......1-43 Heated Seats ..........1-5 Lower Anchorages and Top Tethers for Reclining Seatbacks ........1-6 Children (LATCH System) ......1-47 Head Restraints ..........1-8...
Page 8 Section 1 Seats and Restraint Systems Passenger Sensing System ......1-78 Restraint System Check ........1-84 Servicing Your Air Checking Your Restraint Systems ....1-84 Bag-Equipped Vehicle ........1-83 Replacing Restraint System Parts Adding Equipment to Your Air Bag-Equipped After a Crash ..........1-85 Vehicle ............1-83...
Page 9: Front Seats
Front Seats Manual Seats CAUTION: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to.
Page 10 Power Seats If your vehicle has a power seat, you can adjust it with these controls located on the outboard sides of the seats. • Raise or lower the front of the seat cushion by raising or lowering the forward edge of the horizontal control.
Page 11: Power Lumbar
Power Lumbar Your vehicle may have a memory function which allows seat settings to be saved and recalled. See Memory Seat on page 2-70 for more information. Your vehicle’s seats may be equipped with power lumbar. Heated Seats You can increase or decrease lumbar support The buttons used to in an area of the lower...
Page 12: Reclining Seatbacks
The low setting warms the seatback and cushion until Reclining Seatbacks the seat temperature is near body temperature. The medium and high settings heat the seatback and seat cushion to a slightly higher temperature. You will be able to feel heat in about two minutes. To heat only the seatback, press the vertical button with the heated seatback symbol.
Page 13 CAUTION: Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts can’t do their job when you’re reclined like this. The shoulder belt can’t do its job. In a crash, you could go into it, receiving neck or other injuries.
Page 14: Head Restraints
Head Restraints Seatback Latches CAUTION: If the seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always press rearward on the seatback to be sure it is locked.
Page 15: Rear Seats
Rear Seats The extended cab’s rear seat can also be folded open for more seating space. To use the seat do the following: 1. Push rearward on the seat cushion while pulling Rear Seat Operation (Extended Cab) forward on the release strap under the seat cushion.
Page 16: Safety Belts
2. After folding the seat cushion fully forward, pull the Safety Belts seatback forward and fold the seatback down until it is ﬂat. If the seatback cannot fold ﬂat because it Safety Belts: They Are for Everyone interferes with the cushion, try moving the front seat forward and/or bringing the front seat more This part of the manual tells you how to use safety upright.
Page 17 In most states and in all Canadian provinces, the law says to wear safety belts. Here’s why: They work. CAUTION: You never know if you’ll be in a crash. If you do have a crash, you don’t know if it will be a bad one. It is extremely dangerous to ride in a cargo A few crashes are mild, and some crashes can be so area, inside or outside of a vehicle.
Page 18: Why Safety Belts Work
Why Safety Belts Work When you ride in or on anything, you go as fast as it goes. Put someone on it. Take the simplest vehicle. Suppose it’s just a seat on wheels. 1-12...
Page 19 Get it up to speed. Then stop the vehicle. The rider The person keeps going until stopped by something. In doesn’t stop. a real vehicle, it could be the windshield... 1-13...
Page 20 or the instrument panel... or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That’s why safety belts make such good sense. 1-14...
Page 21 Questions and Answers About If I’m a good driver, and I never drive far from home, why should I wear safety belts? Safety Belts You may be an excellent driver, but if you’re in an accident – even one that isn’t your fault – you and Won’t I be trapped in the vehicle after an your passengers can be hurt.
Page 22: How To Wear Safety Belts Properly
How to Wear Safety Belts Properly This part is only for people of adult size. Be aware that there are special things to know about safety belts and children. And there are different rules for smaller children and babies. If a child will be riding in your vehicle, see Older Children on page 1-32 or Infants and Young Children on page 1-34.
Page 23 4. Push the latch plate into the buckle until it clicks. Pull up on the latch plate to make sure it is secure. If the belt isn’t long enough, see Safety Belt Extender on page 1-31. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.
Page 24 What’s wrong with this? CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should ﬁt against your body. The shoulder belt is too loose. It won’t give nearly as much protection this way.
Page 25 What’s wrong with this? CAUTION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones.
Page 26 What’s wrong with this? CAUTION: You can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt. The belt force would then be applied at the abdomen, not at the pelvic bones, and that could cause serious or fatal injuries.
Page 27 What’s wrong with this? CAUTION: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which are not as strong as shoulder bones.
Page 28 What’s wrong with this? CAUTION: You can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer to ﬁx it.
Page 29: Safety Belt Use During Pregnancy
To unlatch the belt, just push the button on the buckle. The belt should go back out of the way. Before you close the door, be sure the belt is out of the way. If you slam the door on it, you can damage both the belt and your vehicle.
Page 30: Right Front Passenger Position
Right Front Passenger Position Center Passenger Position To learn how to wear the right front passenger’s safety belt properly, see Driver Position on page 1-16. The right front passenger’s safety belt works the same way as the driver’s safety belt—except for one thing. If you ever pull the shoulder portion of the belt out all the way, you will engage the child restraint locking feature which may turn off the passenger’s frontal air bag.
Page 31: Lap Belt
Lap Belt When you sit in a center rear seat position of an extended cab or in the center front seat position of a crew cab, an extended cab, or a regular cab you have a lap belt. To make the belt shorter, pull its free end as shown until the belt is snug.
Page 32: Rear Seat Passengers
Rear Seat Passengers Lap-Shoulder Belt Here’s how to wear a lap-shoulder belt properly. It’s very important for rear seat passengers to buckle up! Accident statistics show that unbelted people in the rear seat are hurt more often in crashes than those who are wearing safety belts.
Page 33 2. Push the latch plate into the buckle until it clicks. Pull up on the latch plate to make sure it is secure. When the shoulder belt is pulled out all the way, it will lock. If it does, let it go back all the way and start again.
Page 34 CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should ﬁt against your body. The lap part of the belt should be worn low and snug on the hips, just touching the thighs.
Page 35: Rear Safety Belt Comfort Guides For Children And Small Adults
Rear Safety Belt Comfort Guides for Children and Small Adults Rear seat comfort guides provide added safety belt comfort for older children who have outgrown booster seats and for small adults. When installed on a shoulder belt, the comfort guide better positions the belt away from the neck and head.
Page 36 2. Place the guide over the belt and insert the two 3. Be sure that the belt is not twisted and it lies ﬂat. edges of the belt into the slots of the guide. The guide must be on top of the belt. 1-30...
Page 37: Safety Belt Extender
Safety Belt Extender If the vehicle’s safety belt will fasten around you, you should use it. But if a safety belt isn’t long enough to fasten, your dealer will order you an extender. It’s free. When you go in to order it, take the heaviest coat you will wear, so the extender will be long enough for you.
Page 38: Child Restraints
Child Restraints What is the proper way to wear safety belts? If possible, an older child should wear a Older Children lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck. The lap belt should ﬁt snugly below the hips, just touching the top of the thighs.
Page 39 CAUTION: (Continued) In a crash, the two children can be crushed together and seriously injured. A belt must be used by only one person at a time. What if a child is wearing a lap-shoulder belt, but the child is so small that the shoulder belt is very close to the child’s face or neck? If the child is sitting in a rear outside seat position, move the child toward the center of the vehicle.
Page 40: Infants And Young Children
CAUTION: (Continued) this way, in a crash the child might slide under the belt. The belt’s force would then be applied right on the child’s abdomen. That could cause serious or fatal injuries. Wherever the child sits, the lap portion of the belt should be worn low and snug on the hips, just touching the child’s thighs.
Page 41 CAUTION: People should never hold a baby in their arms while riding in a vehicle. A baby does not weigh much — until a crash. During a crash a baby will become so heavy it is not possible to hold it. For example, in a crash at only 25 mph (40 km/h), a 12-lb.
Page 42 CAUTION: (Continued) older children, but not for young children and infants. Neither the vehicle’s safety belt system nor its air bag system is designed for them. Young children and infants need the protection that a child restraint system can provide. What are the different types of add-on child restraints? Add-on child restraints, which are purchased by the...
Page 43 The restraint manufacturer’s instructions that come with the restraint state the weight and height CAUTION: limitations for a particular child restraint. In addition, there are many kinds of restraints available for children with special needs. The body structure of a young child is quite unlike that of an adult or older child, for whom the safety belts are designed.
Page 44: Child Restraint Systems
Child Restraint Systems A rear-facing infant seat (B) provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, An infant car bed (A), a special bed made for use in a acts to keep the infant positioned in the restraint.
Page 45 A forward-facing child seat (C-E) provides restraint for A booster seat (F-G) is a child restraint designed to the child’s body with the harness and also sometimes improve the ﬁt of the vehicle’s safety belt system. with surfaces such as T-shaped or shelf-like shields. Some booster seats have a shoulder belt positioner, and some high-back booster seats have a ﬁve-point harness.
Page 46 When choosing a child restraint, be sure the child How do child restraints work? restraint is designed to be used in a vehicle. If it is, it will have a label saying that it meets federal motor A child restraint system is any device designed for vehicle safety standards.
Page 47: Where To Put The Restraint
Where to Put the Restraint CAUTION: (Continued) Accident statistics show that children are safer if they are restrained in the rear rather than the front seat. Even though the passenger sensing system General Motors recommends that child restraints be secured in a rear seat including an infant riding in a and/or air bag off switch are designed to turn rear-facing infant seat, a child riding in a forward-facing off the passenger’s frontal air bag under...
Page 48: Top Strap
There is limited space in the rear seating area of an Top Strap extended cab model. If you want to secure a child restraint in a rear seating position of an extended cab Some child restraints have a top strap or 'top tether'. It model, especially in the rear center position, be can help restrain the child restraint during a collision.
Page 49: Top Strap Anchor Location
Once you have the top strap anchored, you’ll be ready to secure the child restraint itself. Tighten the top strap when and as the child restraint manufacturer’s instructions say. Top Strap Anchor Location Right Front Passenger Position Top Strap Anchor (Regular and Extended Models) If your vehicle is a crew cab model, a child restraint with a top strap should only be used in the second row.
Page 50 For regular and extended cab models, you will ﬁnd the If your vehicle is a regular cab model, there is also a top strap anchor for the right front passenger seat top strap anchor for the right front passenger position behind the seat, near the ﬂoor.
Page 51 Rear Seat Top Strap Anchors (Extended Cab Models) When using a child restraint with a top strap in either rear outboard position, raise the head restraint and route the top strap through the fabric loop on the seatback. Then, attach the top strap to the anchor point at If your vehicle is an extended cab model, you’ll ﬁnd the the center rear seating position.
Page 52: Crew Cab Models
Rear Seat Top Strap Anchors (Crew Cab Models) When using a child restraint with a top strap in the center rear position, route the top strap through the fabric loop on the seatback. Then, raise the head restraint and attach the top strap to the anchor If your vehicle is a crew cab model, you’ll ﬁnd top strap point located at the closest outboard position.
Page 53 Lower Anchorages and Top Tethers This system, designed to make installation of child restraints easier, does not use the vehicle’s safety belts. for Children (LATCH System) Instead, it uses vehicle anchors and child restraint attachments to secure the restraints. Some restraints also use another vehicle anchor to secure a top tether strap.
Page 54 CAUTION: If a LATCH-type child restraint is not attached to its anchorage points, the restraint will not be able to protect the child correctly. In a crash, the child could be seriously injured or killed. Make sure that a LATCH-type child restraint is properly installed using the anchorage points, or use the vehicle’s safety belts to secure the restraint, following the...
Page 55 3. Attach and tighten the LATCH attachments on the child restraint to the LATCH anchorages in the CAUTION: vehicle. The child restraint instructions will show you how. A child in a rear-facing child restraint can be 4. If the child restraint is forward-facing, attach and tighten the top tether to the top tether anchorage.
Page 56 Never put a rear facing child restraint in the right front passenger’s seat unless the air bag is off. Here is why: CAUTION: A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger’s air bag inﬂates.
Page 57 1. Your vehicle has a right front passenger’s frontal air bag. See Air Bag Off Switch on page 1-73 and CAUTION: Passenger Sensing System on page 1-78. If your child restraint is forward-facing, move the seat as far back as it will go before securing the restraint in If the air bag readiness light in the instrument this seat.
Page 58 6. Push and pull the child restraint in different For heavy duty pickups without the passenger directions to be sure it is secure. sensing system, use the air bag off switch to turn the air bag off or install the infant restraint in a rear 7.
Page 59: Securing A Child Restraint In A Rear Outside Seat Position
If you had turned the air bag off with the switch, Securing a Child Restraint in a Rear remember to be sure to use the air bag off switch to Outside Seat Position turn on the right front passenger’s air bag when you remove the child restraint from the vehicle unless Extended Cab and Crew Cab the person who will be sitting there is a member of...
Page 60 2. Pick up the latch plate and run the lap and shoulder portions of the vehicle’s safety belt through or around the restraint. The child restraint instructions will show you how. 4. Pull the rest of the shoulder belt all the way out of the retractor to set the lock.
Page 61 6. Push and pull the restraint in different directions to be sure it is secure. To remove the child restraint, just unbuckle the vehicle’s safety belt and let it go back all the way. The safety belt will move freely again and be ready to work for an adult or larger child passenger.
Page 62: Securing A Child Restraint In A Center Rear Seat Position
Securing a Child Restraint in a Extended Cab Center Rear Seat Position There is limited space in the rear seating area of an extended cab model. If you want to secure a child restraint in a rear seat position of an extended cab model, especially in the rear center seat position, be sure to study the instructions that came with your child restraint to see if there is enough room to secure...
Page 63 1. Make the belt as long as possible by tilting the latch 3. Run the vehicle’s safety belt through or around the plate and pulling it along the belt. restraint. The child restraint instructions will show you how. 2. Put the restraint on the seat. 4.
Page 64: Securing A Child Restraint In The Right Front Seat Position
5. To tighten the belt, pull its free end while you push Securing a Child Restraint in down on the child restraint. If you’re using a the Right Front Seat Position forward-facing child restraint, you may ﬁnd it helpful to use your knee to push the child restraint as (Crew Cab) you tighten the belt.
Page 65 A rear seat is a safer place to secure a forward-facing child restraint. If you need to secure a forward-facing child restraint in the right front seat position, see Where to Put the Restraint on page 1-41. There is no top strap anchor in the right front passenger’s position.
Page 66 5. Pull the rest of the shoulder belt all the way out of 6. To tighten the belt, feed the shoulder belt back into the retractor to set the lock. the retractor while you push down on the child restraint. If you are using a forward-facing child restraint, you may ﬁnd it helpful to use your knee to push down on the child restraint as you tighten the belt.
Page 67 To remove the child restraint, just unbuckle the vehicle’s safety belt and let it go back all the way. The safety CAUTION: belt will move freely again and be ready to work for an adult or larger child passenger. A child in a rear-facing child restraint can be Securing a Child Restraint in the seriously injured or killed if the right front passenger’s air bag inﬂates.
Page 68 Never put a rear facing child restraint in the right front passenger’s seat unless the air bag is off. Here is why: CAUTION: A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger’s air bag inﬂates.
Page 69 If your child restraint does not have the LATCH system, you will be using the lap-shoulder belt to secure the CAUTION: child restraint in this position. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the If the air bag readiness light in the instrument instructions say.
Page 70 4. Buckle the belt. Make sure the release button is 5. Pull the rest of the shoulder belt all the way out of positioned so you would be able to unbuckle the the retractor to set the lock. safety belt quickly if you ever had to. 1-64...
Page 71 7. Push and pull the child restraint in different directions to be sure it is secure. 8. If your vehicle has the passenger sensing system and the air bag is off, the off indicator will be lit and stay lit in the inside rearview mirror when the key is turned to RUN or START.
Page 72 If the on indicator is still lit, use the air bag off switch to To remove the child restraint, just unbuckle the vehicle’s turn off the air bag or secure the child in the child safety belt and let it go back all the way. The safety restraint in a rear seat position in the vehicle if one is belt will move freely again and be ready to work for an available and check with your dealer.
Page 73: Air Bag Systems
Air Bag Systems CAUTION: (Continued) This part explains the air bag system. They are not designed to inﬂate in rollover, Your vehicle has air bags – one air bag for the driver and another air bag for the right front passenger. rear or low-speed frontal crashes, or in many side crashes.
Page 74: Where Are The Air Bags
The system checks the air bag electrical system for malfunctions. The light tells you if there is an electrical CAUTION: problem. See Air Bag Readiness Light on page 3-36 for more information. Anyone who is up against, or very close to, Where Are the Air Bags? any air bag when it inﬂates can be seriously injured or killed.
Page 75 CAUTION: If something is between an occupant and an air bag, the bag might not inﬂate properly or it might force the object into that person causing severe injury or even death. The path of an inﬂating air bag must be kept clear. Don’t put anything between an occupant and an air bag, and don’t attach or put anything on the steering wheel hub or on or near any other air...
Page 76: When Should An Air Bag Inﬂate
When Should an Air Bag Inﬂate? stage air bags. If the rearview mirror in your vehicle does not have a passenger air bag status indicator printed on it, then your vehicle does not have the An air bag is designed to inﬂate in a moderate to severe passenger sensing system and it has single stage air frontal, or near-frontal crash.
Page 77: How Does An Air Bag Restrain
Seat Position Sensors What Makes an Air Bag Inﬂate? Vehicle’s with dual stage air bags are also equipped In an impact of sufficient severity, the air bag sensing with special sensors which enable the sensing system to system detects that the vehicle is in a crash. The monitor the position of both the driver and passenger sensing system triggers a release of gas from the front seats.
Page 78: What Will You See After An Air Bag Inﬂates
What Will You See After an CAUTION: (Continued) Air Bag Inﬂates? to do so. If you have breathing problems but After an air bag inﬂates, it quickly deﬂates, so quickly that some people may not even realize the air bag can not get out of the vehicle after an air bag inﬂated.
Page 79: Air Bag Off Switch
• Air Bag Off Switch Your vehicle is equipped with electronic frontal sensors which help the sensing system distinguish between a moderate and a more severe frontal Regular Cab and Extended Cab Models impact. Your vehicle is also equipped with a crash If your vehicle is a regular cab model or an extended sensing and diagnostic module, which records cab model, it has a switch on the instrument panel...
Page 80 United States without Passenger Sensing System Canada with Passenger Sensing System 1-74...
Page 81 Infant. An infant (less than 1 year old) must ride in the front seat because: • my vehicle has no rear seat; • my vehicle has a rear seat too small to accommodate a rear-facing infant seat; or • the infant has a medical condition which, according to the infant’s physician, makes it necessary for the infant to ride in the front seat so that the driver can constantly monitor the child’s condition.
Page 82 Medical Condition. A passenger has a medical condition which, according to his or her physician: • causes the passenger air bag to pose a special risk for the passenger; and • makes the potential harm from the passenger air bag in a crash greater than the potential harm from turning off the air bag and allowing the passenger, even if belted, to hit the dashboard or windshield in a crash.
Page 83 To turn off the right front passenger’s air bag, insert your ignition key into the switch, push in, and move the switch to the off position. The AIR BAG OFF light will come on to let you know that the right front passenger’s air bag is off. The right front passenger’s air bag will remain off until you turn it back on again, and the AIR BAG OFF light will stay on to remind you that the air bag is off.
Page 84: Passenger Sensing System
To turn the right front passenger’s air bag on again, insert your ignition key into the switch, push in, and move the switch to the ON or AUTO position. Passenger Sensing System Passenger Air Bag Status Indicator – United States If your rearview mirror has one of the indicators pictured in the following illustrations, your vehicle has a passenger sensing system.
Page 85 The passenger sensing system works with sensors that are part of the right front passenger’s seat and safety CAUTION: belt. The sensors are designed to detect the presence of a properly seated occupant and determine if the passenger’s frontal air bag should be enabled (may A child in a rear-facing child restraint can be inﬂate) or not.
Page 86 The passenger sensing system is designed to turn off When the passenger’s frontal air bag has been turned the right front passenger’s frontal air bag if: off either by the passenger sensing system or by the air bag off switch, the off indicator will light and stay lit to •...
Page 87 If after reinstalling the child restraint and restarting the For some children who have outgrown child restraints vehicle, the on indicator is still lit, check to make and for very small adults, the passenger sensing system sure that the vehicle’s seatback is not pressing the child may or may not turn off the right front passenger’s frontal restraint into the seat cushion.
Page 88 CAUTION: (Continued) vehicle serviced promptly, because an adult-size person sitting in the right front passenger’s seat may not have the protection of the frontal air bag. See “Air Bag Readiness Light” in the Index for more on this, including important safety information. Aftermarket equipment, such as seat covers, can affect how well the passenger sensing system operates.
Page 89: Servicing Your Air Bag-Equipped Vehicle
Servicing Your Air Adding Equipment to Your Air Bag-Equipped Vehicle Bag-Equipped Vehicle Air bags affect how your vehicle should be serviced. There are parts of the air bag system in several places Is there anything I might add to the front of the around your vehicle.
Page 90: Restraint System Check
Restraint System Check What if I added a snow plow? Will it keep the air bags from working properly? Checking Your Restraint Systems We have designed our air bag systems to work properly under a wide range of conditions, Now and then, make sure the safety belt reminder light including snow plowing with vehicles equipped and all your belts, buckles, latch plates, retractors with the optional Snow Plow Prep Package...
Page 91: Replacing Restraint System Parts After A Crash
Replacing Restraint System Parts If you’ve had a crash, do you need new belts or LATCH system parts? After a Crash After a very minor collision, nothing may be necessary. But if the belts were stretched, as they would be if worn during a more severe crash, then you need CAUTION: new parts.
Page 92 NOTES 1-86...
Page 93: Features And Controls
Section 2 Features and Controls Keys ...............2-3 Starting and Operating Your Vehicle ....2-22 Remote Keyless Entry System ......2-4 New Vehicle Break-In ........2-22 Remote Keyless Entry System Operation ...2-5 Ignition Positions ..........2-23 Starting Your Engine ........2-24 Doors and Locks ..........2-8 Engine Coolant Heater ........2-26 Door Locks ............2-8 Automatic Transmission Operation ....2-27 Power Door Locks ..........2-9...
Page 94: Table Of Contents
Section 2 Features and Controls ® Automatic Dimming Rearview Mirror with OnStar System ..........2-65 Compass and Temperature Display ....2-58 Storage Areas ..........2-67 Outside Manual Mirrors ........2-60 Glove Box ...........2-67 Outside Camper-Type Mirrors ......2-61 Cupholder(s) ..........2-67 Outside West Coast-Type Mirrors ....2-61 Front Storage Area ........2-68 Outside Power Mirrors ........2-62 Center Console Storage Area ......2-68...
Page 95: Keys
Keys CAUTION: Leaving children in a vehicle with the ignition key is dangerous for many reasons. They could operate the power windows or other controls or even make the vehicle move. The children or others could be badly injured or even killed.
Page 96: Remote Keyless Entry System
Your vehicle has one Remote Keyless Entry System double-sided key for the ignition and all door If equipped, the remote keyless entry system operates locks as well as the spare on a radio frequency subject to Federal Communications tire hoist lock, if equipped. Commission (FCC) Rules and with Industry Canada.
Page 97: Remote Keyless Entry System Operation
At times you may notice a decrease in range. This is Remote Keyless Entry System normal for any remote keyless entry system. If the Operation transmitter does not work or if you have to stand closer to your vehicle for the transmitter to work, try this: You can lock and unlock your doors from about 3 feet •...
Page 98: Battery Replacement
Battery Replacement (Lock): Press this button once to lock all of the doors. Pressing lock again within three seconds Under normal use, the battery in your remote keyless may cause the horn to chirp for lock conﬁrmation. You entry transmitter should last about two years. can choose different feedback options for each press of the lock button.
Page 99 To replace the battery in the keyless entry transmitter, Resynchronization do the following: Resynchronization may be necessary due to the security method used by this system. The transmitter does not send the same signal twice to the receiver. The receiver will not respond to a signal that has been sent previously.
Page 100: Doors And Locks
Doors and Locks There are several ways to lock and unlock your vehicle. You can use the keyless entry system, if equipped, or you can also use your key. Door Locks To lock the door from the inside, slide the lever rearward.
Page 101: Power Door Locks
Power Door Locks If your vehicle has this power door lock switch, press the bottom of the If your vehicle has this switch on either front power door lock switch, door to lock all the press the raised side of doors at once.
Page 102: Delayed Locking
Delayed Locking Programmable Automatic Door Locks If your vehicle is a Crew Cab, it may be equipped with this feature. When locking the doors with the power lock Your vehicle may be equipped with an automatic switch or the keyless entry transmitter and a door or the lock/unlock feature which enables you to program your liftgate is open, the delayed locking feature will delay vehicle’s power door locks.
Page 103 The following instructions tell you how to change the You can exit the program mode any time by turning the automatic door lock mode. Choose one of the three ignition to RUN (the doors will automatically lock and programming options listed above before entering the unlock and the horn will chirp twice to indicate that you program mode.
Page 104 The following instructions tell you how to change the than 30 seconds, the locks will automatically lock automatic door unlock mode. Choose one of the and unlock and the horn will chirp twice to indicate four programming options listed above before entering that you have left the program mode.
Page 105: Rear Door Security Locks
Rear Door Security Locks To use one of the locks do the following: 1. Open one of the rear doors. (Crew Cab) 2. To engage the rear door security lock, move the With this feature, you can lock the rear side lever forward.
Page 106: Lockout Protection
Lockout Protection To open a rear access door from the outside, ﬁrst open the front door. This feature protects you from locking your key in the Then, use the handle vehicle when the key is in the ignition and a door located on the front edge is open.
Page 107: Tailgate Removal
To open a rear access Tailgate door from the inside, the front door must be opened You can open the tailgate by lifting up on its handle ﬁrst. Then, use the while pulling the tailgate toward you. handle located on the To shut the tailgate, ﬁrmly push it upward until inside of the rear access it latches.
Page 108 To remove the tailgate, do the following: 2. With the tailgate at a slight upward angle, 1. Raise the tailgate pull back on the tailgate slightly and release at the right edge and both retaining then move the cable clips. To release tailgate to the right to the retaining cable release the left edge.
Page 109: Windows
Windows CAUTION: Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather.
Page 110: Power Windows
Power Windows Express Down Windows The driver and front passenger windows also have an express down feature that allows the windows to be lowered without holding the switch. Press down fully on the window switch, then release, to activate the express down mode.
Page 111: Sun Visors
Swing-Out Windows Sliding Rear Window If your vehicle has this feature, squeeze the latch in the To open a rear swing-out center of the window and slide the glass to open it. window, ﬂip the latch open and swing the glass out. When you close the window, be sure the latch is engaged.
Page 112: Theft-Deterrent Systems
Theft-Deterrent Systems This message reminds you to activate the theft-deterrent system. Here’s how to do it: Vehicle theft is big business, especially in some cities. 1. Open the door. Although your vehicle has a number of theft-deterrent 2. Lock the door with the power door lock switch or the features, we know that nothing we put on it can make it remote keyless entry transmitter.
Page 113: Testing The Alarm
Remember, the theft-deterrent system won’t activate if Testing the Alarm you lock the doors with a key or use the manual The alarm can be tested by following these steps: door lock. It activates only if you use a power door lock switch with the door open, or with the remote keyless 1.
Page 114: Starting And Operating Your Vehicle
® Passlock Starting and Operating Your Vehicle Your vehicle is equipped with the ® Passlock theft-deterrent system. ® Passlock is a passive theft-deterrent system. New Vehicle Break-In ® Passlock enables fuel if the ignition lock cylinder is turned with a valid key. If a correct key is not used or the Notice: Your vehicle does not need an elaborate ignition lock cylinder is tampered with, fuel is disabled.
Page 115: Ignition Positions
Ignition Positions B (ACCESSORY): This position allows you to use things like the radio, power windows and the windshield wipers when the engine is off. With the key in the ignition switch, you can turn it to four different positions. CAUTION: On manual transmission vehicles, turning the key to LOCK will lock the steering column and...
Page 116: Starting Your Engine
Key Release Button (Manual Retained Accessory Power (RAP) Transmission) Your vehicle may be equipped with a Retained Accessory Power (RAP) feature which will allow certain The ignition key cannot be features on your vehicle to continue to work up to removed from the ignition 10 minutes after the ignition key is turned to LOCK.
Page 117: Manual Transmission
Manual Transmission When starting your engine in very cold weather (below 0°F or −18°C), do this: The gear selector should be in neutral and the parking 1. With your foot off the accelerator pedal, turn the brake engaged. Hold the clutch pedal to the ﬂoor ignition key to START and hold it there up to and start the engine.
Page 118: Engine Coolant Heater
Engine Coolant Heater To Use the Engine Coolant Heater 1. Turn off the engine. In very cold weather, 2. Open the hood and unwrap the electrical cord. The 0°F (−18°C) or colder, the cord is located on the driver’s side of the engine engine coolant heater compartment, near the power steering ﬂuid can help.
Page 119: Automatic Transmission Operation
4. Before starting the engine, be sure to unplug and PARK (P): This position locks your rear wheels. It’s the store the cord as it was before to keep it away best position to use when you start your engine from moving engine parts.
Page 120 To rock your vehicle back and forth to get out of snow, ice or sand without damaging your transmission, CAUTION: see If You Are Stuck: In Sand, Mud, Ice or Snow on page 4-50. If you have four-wheel drive, your vehicle will NEUTRAL (N): In this position, your engine doesn’t be free to roll —...
Page 121 DRIVE (D): This position is for normal driving. If you SECOND (2): This position gives you more power but need more power for passing, and you’re: lower fuel economy. You can use SECOND (2) on hills. It can help control your speed as you go down •...
Page 122: Automatic Transmission
Tow/Haul Mode Overdrive Disable ® (Automatic Transmission) (Allison Transmission ® Your vehicle may be equipped with a Tow/Haul mode. If your vehicle has an Allison Transmission you may The selector button is located on the end of the have the overdrive disable feature. The overdrive disable column shift lever.
Page 123: Manual Transmission Operation
If your vehicle has both Tow/Haul and overdrive disable FIRST (1): Press the clutch pedal and shift into tap the button once to enable or disable Tow/Haul, FIRST (1). Then, slowly let up on the clutch pedal as and press and hold the button to enable or disable you press the accelerator pedal.
Page 124 FOURTH (4) and FIFTH (5): Shift into the higher Five-Speed (VORTEC™ 4300 V6 and forward gears the same way you do for THIRD (3). 4800 V8 Engines) Slowly let up on the clutch pedal as you press the accelerator pedal. Here is how to operate your transmission: To stop, let up on the accelerator pedal and press the FIRST (1): Press the clutch pedal and shift into...
Page 125 NEUTRAL: Use this position when you start or idle Six-Speed (VORTEC™ 8100 V8 and your engine. DURAMAX™ 6600 V8 Engines) REVERSE (R): To back up, ﬁrst press down the clutch pedal. Wait for the vehicle to stop moving and then, Here is how to operate shift into REVERSE (R).
Page 126 During the ﬁrst 500 miles (805 km) of vehicle use, start THIRD (3): Press the clutch pedal and upshift into the vehicle moving in FIRST (1) gear. This allows THIRD (3). Then, slowly let up on the clutch pedal as the clutch components to wear-in properly.
Page 127: Shift Speeds
Shift Speeds If your engine speed drops below 600 rpm, or if the engine is not running smoothly, you should downshift to the next lower gear. When operating on slippery surfaces, downshift at lower than normal vehicle speeds CAUTION: to prevent the tires from slipping. In bench seat equipped vehicles, move the tallest If you skip a gear when you downshift, you beverage containers to the right cupholder to provide...
Page 128: Front Axle Locking Feature
Up-Shift Light Four-Wheel Drive If your vehicle has four-wheel drive, you can send your If you have a manual engine’s driving power to all four wheels for extra traction. transmission, you may To get the most satisfaction out of four-wheel drive, you have a shift light.
Page 129: Manual Transfer Case
Manual Transfer Case A 4WD indicator light will illuminate when you shift into four-wheel drive and the front axle engages. See Four-Wheel-Drive Light on page 3-51. Some delay between shifting and the indicator’s lighting is normal. The transfer case shift lever is on the ﬂoor to the right of the driver.
Page 130 Recommended Transfer Case Settings CAUTION: Transfer Case Settings Driving Conditions Shifting the transfer case to NEUTRAL can Normal cause your vehicle to roll even if the Severe transmission is in PARK (P), or if you have a Extreme manual transmission, even if you are in gear. Vehicle in Tow* You or someone else could be seriously injured.
Page 131 You can shift from 2-Wheel High (2HI) to 4-Wheel High Shifting from 2HI to 4HI (4HI) or from 4-Wheel High (4HI) to 2-Wheel High • Shifts between 2HI and 4HI can be made at any (2HI) while the vehicle is moving. Your front axle will vehicle speed.
Page 132: Automatic Transfer Case
Shifting In or Out of 4LO Automatic Transfer Case Notice: Shifting the transfer case into 4LO while The transfer case moving at speeds faster than 3 mph (5 km/h) buttons are located to the may cause premature wear to the transfer case, and left of the instrument may cause the gears to grind.
Page 133 Recommended Transfer Case Settings This setting also engages your front axle to help drive your vehicle. This is the best setting to use when (cont’d) plowing snow. Transfer Case Settings (4LO): This setting also engages your front axle Driving AUTO and delivers extra torque.
Page 134 Indicator lights in the switches show which setting your Shifting into 4LO transfer case is in. The indicator lights will come on To shift to 4LO, the ignition must be in RUN and the brieﬂy when you turn on the ignition and one will stay on. vehicle must be stopped or moving less than If the lights do not come on, you should take your 3 mph (4.8 km/h) with the transmission in NEUTRAL (N).
Page 135 Shifting Out of 4LO Shifting into NEUTRAL To shift from 4LO to 4HI, AUTO 4WD or 2HI your vehicle To shift the transfer case to NEUTRAL do the following: must be stopped or moving less than 3 mph (4.8 km/h) 1.
Page 136: Electronic Transfer Case
Shifting Out of NEUTRAL Electronic Transfer Case To shift out of NEUTRAL: If your four-wheel-drive 1. Set the parking brake and apply the regular vehicle has the electronic brake pedal. transfer case, the transfer case switches are 2. Shift the transmission to NEUTRAL (N) and turn the located to the left of the ignition to RUN with the engine off.
Page 137 Recommended Transfer Case Settings Indicator lights in the switches show you which setting you are in. The indicator lights will come on brieﬂy when (cont’d) you turn on the ignition and the last chosen setting will Transfer Case Settings stay on. If the lights do not come on, you should take your Driving Conditions vehicle in for service.
Page 138 Shifting from 2HI to 4HI If the 4LO switch is pressed when your vehicle is in gear and/or moving, the 4LO indicator light will ﬂash for Press and release the 4HI switch. This can be done at 30 seconds and not complete the shift unless your any speed, and the front axle will lock automatically vehicle is moving slower than 3 mph (4.8 km/h) and the with some delay.
Page 139 Shifting into NEUTRAL Shifting Out of NEUTRAL To shift the transfer case to NEUTRAL, ﬁrst make sure To shift out of NEUTRAL: the vehicle is parked so that it will not roll: 1. Set the parking brake and apply the regular brake pedal.
Page 140: Parking Brake
All-Wheel Drive If your vehicle has the SS package, it may be equipped with all-wheel drive. With this feature, engine power is sent to all four wheels all the time. This is like four-wheel drive, but there is no separate lever or switch to engage or disengage the front axle.
Page 141: Shifting Into Park (P)
Shifting Into Park (P) 1. Hold the brake pedal down with your right foot and set the parking brake. Automatic Transmission 2. Move the shift lever into PARK (P) position like this: CAUTION: It can be dangerous to get out of your vehicle if the shift lever is not fully in PARK (P) with the parking brake ﬁrmly set.
Page 142 Leaving Your Vehicle With the Engine Running (Automatic Transmission) CAUTION: It can be dangerous to leave your vehicle with the engine running. Your vehicle could move suddenly if the shift lever is not fully in PARK (P) with the parking brake ﬁrmly set. If you have four-wheel drive with a manual transfer case shift lever and your transfer case is in NEUTRAL, your vehicle will be free to roll,...
Page 143: Shifting Out Of Park (P)
If you have to leave your vehicle with the engine Shifting Out of Park (P) running, be sure your vehicle is in PARK (P) and the parking brake is ﬁrmly set before you leave it. After you Automatic Transmission move the shift lever into PARK (P), hold the regular brake pedal down.
Page 144: Parking Your Vehicle
Parking Your Vehicle Parking Over Things That Burn Manual Transmission CAUTION: Shifting the transfer case to NEUTRAL can cause your vehicle to roll even if the manual transmission is in gear. Your or someone else could be seriously injured. Be sure to set the parking brake before placing the transfer case in NEUTRAL.
Page 145: Engine Exhaust
Engine Exhaust Running Your Engine While You Are Parked CAUTION: It is better not to park with the engine running. But if you ever have to, here are some things to know. Engine exhaust can kill. It contains the gas carbon monoxide (CO), which you can not see CAUTION: or smell.
Page 146 CAUTION: CAUTION: It can be dangerous to get out of your vehicle Four-wheel drive vehicles with the transfer if the shift lever is not fully in PARK (P) with case in NEUTRAL will allow the vehicle to roll, the parking brake ﬁrmly set. Your vehicle can even if your shift lever is in PARK (P).
Page 147: Mirrors
Mirrors Manual Rearview Mirror Pull the tab under the mirror toward you to reduce glare from headlamps behind you after dark. Push the tab away from you for normal daytime operation. The mirror also includes a dual display in the upper Automatic Dimming Rearview Mirror right corner of the mirror face.
Page 148: Compass Variance
To adjust between Fahrenheit and Celsius do Compass Variance the following: The mirror is set in zone eight upon leaving the factory. It 1. Press and hold the on/off button for approximately will be necessary to adjust the compass to compensate four seconds until either a ﬂashing °F, or °C appears.
Page 149: Compass Calibration
Compass Calibration The compass may need calibration if one of the following occurs: • After approximately ﬁve seconds, the display does not show a compass heading (N for North, for example), there may be a strong magnetic ﬁeld interfering with the compass. Such interference may be caused by a magnetic antenna mount, magnetic note pad holder or a similar magnetic item.
Page 150: Passenger Air Bag Indicator
Passenger Air Bag Indicator Temperature Display Your vehicle may be equipped with a passenger air bag The temperature can be displayed by pressing the indicator, on the mirror glass, just above the buttons. TEMP button. Pressing the TEMP button once brieﬂy, For more information, see Passenger Sensing System will toggle the temperature reading on and off.
Page 151: Compass Operation
Compass Operation In order to calibrate, CAL must be displayed in the mirror compass windows. If CAL is not displayed, push Press the COMP button once brieﬂy to turn the compass in the COMP button for approximately eight seconds on or off. or until CAL is displayed.
Page 152: Outside Manual Mirrors
To adjust for compass variance: Passenger Air Bag Indicator 1. Find your current location and variance zone Your mirror may be equipped with a passenger air bag number on the following zone map. indicator on the mirror glass, just above the buttons. For more information see Passenger Sensing System on page 1-78.
Page 153: Outside Camper-Type Mirrors
Outside Camper-Type Mirrors Outside West Coast-Type Mirrors If your vehicle is equipped with the west coast-type mirrors, they can be adjusted so you can have a clear view of objects behind you. A. Outer Mirror Frame B. Mirror Head C. Nut If your vehicle is equipped with camper-type mirrors, they can be adjusted so you can have a clear view of the objects behind you.
Page 154: Outside Power Mirrors
Outside Power Mirrors Outside Power Camper-Type Mirror If your vehicle is equipped with outside power If your vehicle is equipped camper-type mirrors, they can be adjusted so you with power outside mirrors, can have a clear view of objects behind you. the controls are located on the driver’s To extend the mirrors move the selector switch, located...
Page 155: Outside Power Foldaway Mirrors
Outside Power Foldaway Mirrors To fold or unfold the mirrors, move the selector switch, located above the mirror control, to the middle position. The mirror control will illuminate. Press the If your vehicle is equipped right or left side of the mirror control to fold or unfold the with this feature, the mirrors.
Page 156: Outside Automatic Dimming Mirror
Resetting the Power Foldaway Mirrors Outside Curb View Assist Mirrors You will need to reset the power foldaway mirrors if the If your vehicle has the optional memory package following occurs: you may have this feature. • They are accidentally manually folded/unfolded. The vehicle’s mirrors are capable of performing the curb •...
Page 157: Outside Convex Mirror
® Outside Convex Mirror OnStar System Your passenger’s side mirror is convex. A convex mirror’s surface is curved so you can see more from the driver’s seat. CAUTION: A convex mirror can make things (like other ® OnStar uses global positioning system (GPS) satellite vehicles) look farther away than they really are.
Page 158: Onstar Services
® OnStar Services Directions and Connections Plan • All Safe and Sound Plan services One of the following plans is normally included for a speciﬁc duration with each vehicle equipped with • Route Support ® ® OnStar . You can upgrade or extend your OnStar •...
Page 159: Storage Areas
® OnStar Virtual Advisor Storage Areas ® With OnStar Virtual Advisor you can listen to your Your vehicle includes a number of storage favorite news, entertainment and information topics, compartments for storage of often-used items. such as traffic and weather reports, stock quotes Some vehicles have storage areas in the and sports scores.
Page 160: Front Storage Area
Front Storage Area Tonneau Cover Your vehicle may have a center armrest storage If your vehicle is equipped with a tonneau cover, follow compartment in the front bench seat. the directions below to remove the cover. 1. To remove, unsnap the To open it, fold down the armrest and press the latch cover.
Page 161 3. Remove the three bows by gently pushing them against the spring-loaded end. The three bows are labeled front, center, rear to remind you of the A. Back rail D. Center bow order in which to reinstall them. B. Side rail E.
Page 162: Vehicle Personalization
4. To add cargo to the Vehicle Personalization box, remove all bows and the back rail Memory Seat and stow them safely. If your vehicle has this feature, then the controls for the memory function are located on the driver’s door. To clean the tonneau cover, use mild soap and water.
Page 163 To store your memory seat, mirrors and radio presets, If you use the unlock button on the remote keyless entry do the following: transmitter to enter your vehicle, the preset driver’s seat, mirror positions and the radio station presets will 1.
Page 164: Easy Exit Seat
Easy Exit Seat 3. Press and hold the exit button of the memory control for three seconds. A double chime will sound The controls for this memory function are located on the to let you know that the position has been stored driver’s door.
Page 165 Section 3 Instrument Panel Instrument Panel Overview .......3-4 Anti-Lock Brake System Warning Light .....3-44 Hazard Warning Flashers ........3-6 Traction Off Light ..........3-45 Other Warning Devices ........3-6 Engine Coolant Temperature Gage ....3-46 Horn .............3-6 Transmission Temperature Gage .....3-46 Tilt Wheel .............3-7 Malfunction Indicator Lamp ......3-48 Turn Signal/Multifunction Lever ......3-7 Oil Pressure Gage ........3-50...
Page 166 Section 3 Instrument Panel Theft-Deterrent Feature ........3-127 Care of Your CD and DVD Player ....3-130 Audio Steering Wheel Controls ......3-127 Fixed Mast Antenna ........3-130 Radio Reception .........3-128 XM™ Satellite Radio Antenna System ....3-130 Care of Your Cassette Tape Player ....3-129 Chime Level Adjustment .......3-130 Care of Your CDs and DVDs ......3-130...
Page 167 NOTES...
Page 168: Instrument Panel Overview
Instrument Panel Overview...
Page 169 The main components of your instrument panel are the following: A. Dome Lamp Button. See “Dome Lamps” under L. Hood Release. See Hood Release on page 5-12. Interior Lamps on page 3-18. M. Steering Wheel Control Buttons (If Equipped). B. Exterior Lamp Controls. See Exterior Lamps on See Driver Information Center (DIC) on page 3-53.
Page 170: Hazard Warning Flashers
Hazard Warning Flashers The hazard warning ﬂasher button is located at the top of the steering column. Your hazard warning ﬂashers work no matter what position your key is in, and even if the key isn’t in. Press the button to make the front and rear turn signal lamps ﬂash on and off.
Page 171: Tilt Wheel
Tilt Wheel Turn Signal/Multifunction Lever If your vehicle is equipped with a tilt wheel, it will allow you to adjust the steering wheel before you drive. You can raise it to the highest level to give your legs more room when you exit and enter your vehicle. The lever on the left side of the steering column includes the following: •...
Page 172: Turn And Lane Change Signals
Turn and Lane Change Signals Turn Signal On Chime The turn signal has two upward (for right) and two If your turn signal is left on for more than 3/4 of a mile downward (for left) positions. These positions allow you (1.2 km), a chime will sound at each ﬂash of the to signal a turn or a lane change.
Page 173: Windshield Wipers
Flash-to-Pass (Delay): You can set the wiper speed for a long or short delay between wipes. This can be very useful This feature lets you use your high-beam headlamps in light rain or snow. Turn the band to choose the delay to signal a driver in front of you that you want to time.
Page 174: Windshield Washer
Windshield Washer Cruise Control (Washer Fluid): There is a paddle marked with the (Off): This position windshield washer symbol at the top of the multifunction turns the system off. lever. To spray washer ﬂuid on the windshield, push the paddle. The wipers will clear the window and then either stop or return to your preset speed.
Page 175 If you apply your brakes, the cruise control will shut off. Setting Cruise Control CAUTION: CAUTION: Cruise control can be dangerous where you If you leave your cruise control on when you can not drive safely at a steady speed. So, do are not using cruise, you might hit a button not use your cruise control on winding roads and go into cruise when you do not want to.
Page 176 Resuming a Set Speed • Move the cruise switch from on to resume/accelerate. Hold it there until you get up to Suppose you set your cruise control at a desired speed the speed you want, and then release the switch. and then you apply the brake.
Page 177: Exterior Lamps
Using Cruise Control on Hills Exterior Lamps How well your cruise control will work on hills depends upon your speed, load and the steepness of the hills. When going up steep hills, you may want to step on the accelerator pedal to maintain your speed. When going downhill, you may have to brake or shift to a lower gear to keep your speed down.
Page 178: Automatic Headlamp System
AUTO (Automatic): Turning the control to this position Automatic Headlamp System puts the system into automatic headlamp mode. When it is dark enough outside, your automatic headlamp system will turn on your headlamps at the (Parking Lamps): Turning the control to this normal brightness along with other lamps such as position turns on the parking lamps, together with the taillamps, sidemarker, parking lamps and the...
Page 179: Daytime Running Lamps
If you start your vehicle in a dark garage, the automatic Daytime Running Lamps headlamp system will come on immediately. Once Daytime Running Lamps (DRL) can make it easier for you leave the garage, it will take approximately others to see the front of your vehicle during the one minute for the automatic headlamp system to day.
Page 180 To idle an automatic transmission equipped vehicle with Your parking lamps and/or low-beam headlamps must the DRL off, set the parking brake. Shifting the be on for your fog lamps to work. transmission into PARK (P) will also allow you to idle Press the button to turn the fog lamps on.
Page 181: Auxiliary Roof Mounted Lamp Switch
Auxiliary Roof Mounted Lamp Switch Cargo Lamp If your vehicle has this feature, this switch includes The cargo lamp button is wiring provisions for a dealer or a qualiﬁed service located on the left side of center to install an auxiliary roof lamp. the instrument panel.
Page 182: Interior Lamps
Interior Lamps Front Reading Lamps Instrument Panel Brightness Control If equipped, the reading lamps are located on the overhead console. : This feature controls the brightness of the instrument panel lights. The thumbwheel for this feature is located next to the headlamp control.
Page 183: Accessory Power Outlets
To use the outlet, lift the cover. When not using it, : You can use the dome override button, located always close the cover. below the exterior lamps control, to set the dome lamps to come on automatically, or remain off, when the Certain power accessory plugs may not be compatible doors are opened.
Page 184: Ashtrays And Cigarette Lighter
Ashtrays and Cigarette Lighter Climate Controls Your vehicle may be equipped with a front ashtray Climate Control System located near the center of the instrument panel. Pull on the door to open it. Notice: If you put papers or other ﬂammable items in the ashtray, hot cigarettes or other smoking materials could ignite them and possibly damage your vehicle.
Page 185 Temperature Knob (Floor): This setting directs most of the air through the ﬂoor outlets, and the rest of the air is divided The middle knob on the control panel lets you select the between the windshield defroster outlets and the side temperature of the air ﬂowing into the passenger window defroster outlets.
Page 186: Dual Climate Control System
Dual Climate Control System To change the current mode, select one of the following: (Vent): This mode directs air to the instrument With this system you can control the heating, cooling panel vents. and ventilation for your vehicle. (Bi-Level): This mode directs half of the air to the instrument panel vents;...
Page 187: Defogging And Defrosting
Temperature Control Defogging and Defrosting Driver’s Side: The lever on the left side of the climate Fog on the inside of the windows is a result of high control panel is used to raise or lower the temperature humidity (moisture) condensing on the cool window on the driver’s side of the vehicle.
Page 188: Rear Window Defogger
Rear Window Defogger Outlet Adjustment The lines you see on the rear window warm the glass. Use the air outlets located The rear window defogger uses a warming grid to in the center and on the remove fog from the rear window. side of your instrument panel to direct the airﬂow.
Page 189: Dual Automatic Climate Control System
Operation Tips Dual Automatic Climate • Control System Keep the hood and front air inlets free of ice, snow, or any other obstruction (such as leaves). The With this system, you can control the heating, cooling heater and defroster will work far better, reducing and ventilation in your vehicle.
Page 190 Driver’s Side Temperature Knob Turn the knob counterclockwise or clockwise to lower or increase the cabin temperature. The display will show The driver’s side knob is used to adjust the temperature the temperature setting decreasing or increasing and an of the air coming through the system on the driver’s arrow pointing to the passenger will be displayed side.
Page 191 Use the steps below to place the entire system in 2. Set the driver’s and passenger’s temperature. automatic mode: To ﬁnd your comfort setting, start with a 74°F (23°C) temperature setting and allow about 20 minutes 1. Press the AUTO button. for the system to regulate.
Page 192 If you press the mode button to select an air delivery (Off): Press this button to turn off the entire climate mode, the display will change to show you the selected control system. Outside air will still enter the vehicle, air mode delivery.
Page 193 Pressing this button also cancels the auto recirculation Display feature. To resume the auto recirculation function, press If you press the MODE button to select an air delivery the AUTO button. Each time the vehicle is started, the mode, the display will change to show you the selected system will revert to the auto recirculation function.
Page 194: Air Conditioning
Air Conditioning On hot days, open the windows long enough to let hot inside air escape. This reduces the time it takes for your vehicle to cool down. Then keep your windows (Air Conditioning): Press this button to turn the closed for the air conditioner to work its best.
Page 195 Defogging and Defrosting Rear Window Defogger You can use either defog or front defrost to clear fog or If your vehicle has this feature, the lines you see on the frost from your windshield. Use the defog mode to rear window warm the glass. The rear window clear the windows of fog or moisture.
Page 196 Outlet Adjustment Operation Tips • Keep the hood and front air inlets free of ice, snow, Use the air outlets located or any other obstruction (such as leaves). The in the center and on the heater and defroster will work far better, reducing side of your instrument the chance of fogging the inside of your windows.
Page 197: Warning Lights, Gages, And Indicators
Warning Lights, Gages, Gages can indicate when there may be or is a problem with one of your vehicle’s functions. Often gages and Indicators and warning lights work together to let you know when there’s a problem with your vehicle. This part describes the warning lights and gages that When one of the warning lights comes on and stays on may be on your vehicle.
Page 198: Instrument Panel Cluster
Instrument Panel Cluster United States Heavy Duty Automatic Transmission version shown. Canada, Light Duty Automatic and Manual Transmission Clusters similar. Your instrument cluster is designed to let you know at a glance how your vehicle is running. You’ll know how fast you’re going, about how much fuel you have and many other things you’ll need to know to drive safely and economically.
Page 199: Speedometer And Odometer
Speedometer and Odometer Engine Hour Meter Display The odometer can also display the number of hours the Your speedometer lets you see your speed in both engine has run. To display the hour meter, turn the miles per hour (mph) and kilometers per hour (km/h). ignition off, press and hold the reset button for at least Your odometer shows how far your vehicle has four seconds.
Page 200: Safety Belt Reminder Light
Safety Belt Reminder Light Air Bag Readiness Light When the key is turned to RUN or START, a chime will There is an air bag readiness light on the instrument come on for several seconds to remind people to panel cluster, which shows the air bag symbol. fasten their safety belts, unless the driver’s safety belt is The system checks the air bag’s electrical system for already buckled.
Page 201: Air Bag Off Light
Air Bag Off Light When you turn the right front passenger’s air bag off, this light will be lit and stay lit to remind you that the air bag has been turned off. This light will go off when you turn the air bag back on again. See Air Bag Off Switch on page 1-73 for more on this, including important safety information.
Page 202 Canada with Passenger Sensing System Canada without Passenger Sensing System 3-38...
Page 203 CAUTION: CAUTION: If the right front passenger’s air bag is turned If the air bag readiness light ever comes on off for a person who isn’t in a risk group when you have turned off the air bag, it means identiﬁed by the national government, that that something may be wrong with the air bag person won’t have the extra protection of an...
Page 204: Passenger Air Bag Status Indicator
Passenger Air Bag Status Indicator If the word ON or the on symbol is lit on the passenger air bag status indicator, it means that the right front passenger’s frontal air bag is enabled (may inﬂate). If your vehicle has the passenger sensing system your rearview mirror will have a passenger air bag status indicator.
Page 205 If the word OFF or the off symbol is lit on the passenger If, after several seconds, all status indicator lights air bag status indicator, it means that the passenger remain on, or if there are no lights at all, there may be a sensing system or the air bag off switch has turned off problem with the lights or the passenger sensing the right front passenger’s air bag.
Page 206: Battery Warning Light
Battery Warning Light Voltmeter Gage If this light is displayed When your engine is not when the engine is running, but the ignition is running, you may have in RUN, this gage a problem with your shows your battery’s state charging system.
Page 207: Up-Shift Light
Readings in the low warning zone may occur when a Brake System Warning Light large number of electrical accessories are operating in the vehicle and the engine is left at an idle for an With the ignition on, the brake system warning light will extended period.
Page 208: Anti-Lock Brake System Warning Light
If the light comes on while you are driving, pull off the Anti-Lock Brake System road and stop carefully. You may notice that the pedal is Warning Light harder to push. Or, the pedal may go closer to the ﬂoor. It may take longer to stop. If the light is still on, have the vehicle towed for service.
Page 209: Traction Off Light
Traction Off Light • If you move the shift lever to FIRST (1), the light will come on and stay on to indicate that the traction system is off. This is normal operation. To If you have the Traction turn the system back on, move the shift lever Assist System, this light back to a position other than FIRST (1);...
Page 210: Engine Coolant Temperature Gage
Engine Coolant Temperature Gage Transmission Temperature Gage United States Canada United States Canada This gage shows the engine coolant temperature. Your vehicle may be equipped with a transmission temperature gage. It also provides an indicator of how hard your vehicle is working.
Page 211 See Driver Information Center (DIC) on page 3-53 for The following situations can cause the transmission to further information. operate at higher temperatures: • Towing a trailer If your vehicle has an Allison transmission, and the ﬂuid reaches temperatures of approximately 275°F (135°C) •...
Page 212: Malfunction Indicator Lamp
Malfunction Indicator Lamp Notice: Modiﬁcations made to the engine, transmission, exhaust, intake, or fuel system of your vehicle or the replacement of the original tires Check Engine Light with other than those of the same Tire Performance Criteria (TPC) can affect your vehicle’s emission Your vehicle is equipped controls and may cause this light to come on.
Page 213: If The Light Is Flashing
If the Light is Flashing been left off or improperly installed. A loose or missing fuel cap will allow fuel to evaporate into the atmosphere. The following may prevent more serious damage to A few driving trips with the cap properly installed your vehicle: should turn the light off.
Page 214: Oil Pressure Gage
Emissions Inspection and Maintenance Oil Pressure Gage Programs Some state/provincial and local governments have or may begin programs to inspect the emission control equipment on your vehicle. Failure to pass this inspection could prevent you from getting a vehicle registration. Here are some things you need to know to help your vehicle pass an inspection: Your vehicle will not pass this inspection if the check...
Page 215: Maintenance Schedule
A reading in the low pressure zone may be caused by a Cruise Control Light dangerously low oil level or some other problem causing low oil pressure. Check your oil as soon as The cruise light comes on possible. See Oil Pressure Low under DIC Warnings whenever you set your and Messages on page 3-64 and Engine Oil on cruise control.
Page 216: Tow/Haul Mode Light
Tow/Haul Mode Light Fuel Gage This light is displayed when the Tow/Haul mode has been activated. For more information, see Towing a Trailer on page 4-70. United States Canada Overdrive Disable When the ignition is on, the fuel gage tells you about how much fuel you have left in your tank.
Page 217: Low Fuel Warning Light
Here are some situations you may experience with your Driver Information Center (DIC) fuel gage. None of these indicate a problem with the fuel gage. The DIC display is located on the instrument panel cluster above the steering wheel. The DIC can display •...
Page 218: Trip Information Button
C (Personalization): This button will change personal Trip Information Button options available on your vehicle. Press the trip information button to scroll through the D (Select): This button resets certain functions and ODOMETER, PERSONAL TRIP ON/OFF, BUSINESS turns off or acknowledges messages on the DIC. TRIP ON/OFF, HOURMETER, ANNUAL LOG and If your vehicle is not equipped with the DIC steering TIMER.
Page 219 • To reset personal or business trip information press and PERSONAL: XXX.X AVG MPH — This shows the hold the select button for approximately one second vehicle’s average speed for the personal trip. while in one of the personal or business trip modes. This •...
Page 220: Fuel Information Button
Annual Log If your vehicle is not equipped with DIC steering wheel control buttons you will not be able to display the Press the trip information button to scroll to the annual fuel information. log. The annual log shows the mileage accumulated Fuel Range since it was last reset.
Page 221: Maintenance Schedule
Instant Fuel Economy Personalization Button Press the fuel information button until INST ECON You can program certain features to a preferred setting appears in the display. Instant fuel economy is how for up to two people. Press the personalization button many miles per gallon your vehicle is getting at to scroll through the following personalization features.
Page 222 The default options for the above features were set Choose one of the four options and press the when your vehicle left the factory. The default options personalization button while your choice is displayed on are noted in the text following, but may have been the DIC to select it and move on to the next feature.
Page 223 Automatic Unlocking When locking the doors with the power lock switch or the keyless entry transmitter and a door or the liftgate is Press the personalization button until AUTOMATIC open, the delayed locking feature will delay locking UNLOCKING appears in the display. To select the doors and tailgate until ﬁve seconds after the last your personalization for automatic unlocking, press the door is closed.
Page 224 Seat Position Recall Perimeter Lighting Press the personalization button until SEAT POSITION Press the personalization button until PERIMETER RECALL appears in the display. To select your LIGHTING appears in the display. To select your personalization for seat position recall, press the select personalization for perimeter lighting, press the select button while SEAT POSITION RECALL is displayed button while PERIMETER LIGHTING is displayed on the...
Page 225 Remote Lock Feedback Remote Unlock Feedback Press the personalization button until REMOTE LOCK Press the personalization button until REMOTE FEEDBACK appears in the display. To select your UNLOCK FEEDBACK appears in the display. To select personalization for the feedback you will receive when your personalization for the feedback you will receive locking the vehicle with the remote keyless entry when unlocking the vehicle with the remote keyless...
Page 226 Headlamps On At Exit Curb View Assist Press the personalization button until HEADLAMPS ON Press the personalization button until CURB VIEW AT EXIT appears in the display. To select your ASSIST appears in the display. To select your personalization for how long the headlamps will stay on personalization for curb view assist, press the select when you turn off the vehicle, press the select button button while CURB VIEW ASSIST is displayed on...
Page 227 Easy Exit Driver Seat Display Units (ENG/MET) Press the personalization button until DISPLAY UNITS Press the personalization button until EASY EXIT appears in the display. To select English or metric, DRIVER SEAT appears in the display. To select your press the select button while DISPLAY UNITS is personalization for seat position exit, press the displayed on the DIC.
Page 228: Dic Warnings And Messages
If you accidentally choose a language that you don’t DIC Warnings and Messages want or understand, press and hold the personalization button and the trip information button at the same Warning messages are displayed on the DIC to notify time. The DIC will begin scrolling through the languages the driver that the status of the vehicle has changed and in their particular language.
Page 229: Buckle Seatbelt
BUCKLE SEATBELT CARGO LAMP ON If your vehicle is equipped with the passenger sensing If the cargo lamp is on, this message will appear on the system, this message reminds you to buckle the DIC and you will hear a chime. Turn off the vehicle driver’s and/or passenger’s seatbelt.
Page 230: Change Engine Oil
CHANGE ENGINE OIL ENGINE OVERHEATED This message is displayed when the engine oil needs to If the engine cooling system reaches unsafe be changed. temperatures for operation, this message will appear in the DIC and you will hear a chime. Stop and turn off When you change the engine oil, be sure to reset the the vehicle as soon as it is safe to do so to avoid severe CHANGE ENGINE OIL message.
Page 231: Passenger Door Ajar
LEFT REAR DOOR AJAR (Crew Cab) PASSENGER DOOR AJAR If the driver’s side rear door is not fully closed, this If the passenger’s door is not fully closed, this message message will appear on the display and you will hear a will appear on the display and you will hear a chime.
Page 232: Service Brake System
RIGHT REAR DOOR AJAR (Crew Cab) SERVICE BRAKE SYSTEM If the passenger’s side rear door is not fully closed, If there is a problem with the brake system, this this message will appear on the display and you message will be displayed on the DIC. If this message will hear a chime.
Page 233: Service 4 Wheel Steer
SERVICE 4 WHEEL STEER CAUTION: If a problem occurs with the 4-wheel steer system, this message will appear on the DIC. If this message appears, stop as soon as possible, and turn off the Your brake system may not be working vehicle.
Page 234: Tighten Fuel Cap
TIGHTEN FUEL CAP TRANSMISSION HOT If the vehicle’s fuel cap is not tightened properly this If the transmission ﬂuid temperature becomes high, the message may appear along with the check engine light message center will display this message. on the instrument panel. See Malfunction Indicator When the transmission enters the protection mode, you Lamp on page 3-48.
Page 235: Trans Hot Idle Engine
The following situations can cause the transmission to TRANS HOT IDLE ENGINE operate at higher temperatures: ® (Allison Transmission Only) • Towing a trailer If the transmission ﬂuid in the vehicle gets hot, this • Hot outside air temperatures message will appear on the DIC, and you will hear a chime.
Page 236: Turn Signal On
TURN SIGNAL ON Figure out which audio system is in your vehicle, ﬁnd out what your audio system can do, and how to operate If a turn signal is left on for 3/4 of a mile (1.2 km), this all of its controls. message will appear on the display and you will Your vehicle may have a feature called Retained hear a chime.
Page 237: Setting The Time For Radios With Radio Data Systems (Rds)
Setting the Time for Radios with AM-FM Radio Radio Data Systems (RDS) The radio may have a button marked with an H or HR to represent hours and an M or MN to represent minutes. Press and hold the hour button until the correct hour appears on the display.
Page 238: Finding A Station
Finding a Station Setting Preset Stations Up to 18 stations (six FM1, six FM2, and six AM) can be AM FM: Press this button to switch between FM1, FM2, programmed on the six numbered pushbuttons, by or AM. The display will show the selection. performing the following steps: TUNE: Turn this knob to select radio stations.
Page 239: Radio Messages
To adjust both tone controls and both speaker controls To adjust both tone controls and both speaker controls to the middle position, ﬁrst end out of audio mode to the middle position, ﬁrst end out of audio mode by pressing another button, causing the radio to perform by pressing another button, causing the radio to perform that function or by waiting ﬁve seconds for the display that function or by waiting ﬁve seconds for the display...
Page 240: Radio With Cd
Radio with CD • Display messages from radio stations • Seek to stations with traffic announcements This system relies upon receiving speciﬁc information from these stations and will only work when the information is available. In rare cases, a radio station may broadcast incorrect information that will cause the radio features to work improperly.
Page 241: Playing The Radio
Playing the Radio For XM™ (if equipped), press the DISPL knob while in XM™ mode to retrieve four different categories of information related to the current song or channel: PWR (Power): Press this knob to turn the system on Artist, Song Title, Category or PTY, Channel and off.
Page 242 To scan preset stations, press and hold either arrow for Setting the Tone (Bass/Treble) more than four seconds. PSCN will appear on the display and you will hear two beeps. The radio will go to AUDIO: Push and release the AUDIO knob until BASS the ﬁrst preset station, play for a few seconds, then or TREB appears on the display.
Page 243: Rds And Xm
Adjusting the Speakers (Balance/Fade) 2. Turn the P-TYPE knob to select a PTY. 3. Once the desired PTY is displayed, press the AUDIO: To adjust the balance to the right and the SEEK TYPE button or one of the SEEK arrows left speakers, push and release the AUDIO knob until to take you to the PTY’s ﬁrst station.
Page 244: Rds Messages
3. Once the desired PTY is displayed, press either 3. Turn the P-TYPE knob to select a PTY. SCAN arrow, and the radio will begin scanning 4. Press and hold one of the six numbered the stations in the PTY. pushbuttons until you hear a beep.
Page 245 If the entire message is not displayed, parts of the If TRAF is on the display, press the TRAF button to turn message will appear every three seconds. To scroll off the traffic announcements. through the message, press and release the INFO The radio will play the traffic announcement even if the button.
Page 246 XM™ Radio Messages Radio Display Condition Action Required Message XL (Explicit Language XL on the radio display, These channels, or any others, can be blocked at a Channels) after the channel name, customer’s request, by calling 1-800-852-XMXM (9696). indicates content with explicit language.
Page 247 XM™ Radio Messages (cont’d) Radio Display Condition Action Required Message No Info Category Name No category information is available at this time on this not available channel. The system is working properly. No Info No Text/Informational No text or informational messages are available at this time message available on this channel.
Page 248: Playing A Cd
Playing a CD Do not add paper labels to CDs, they could get caught in the CD player. Insert a CD partway into the slot, label side up. The If an error appears on the display, see “CD Messages” player will pull it in and the CD should begin playing. If later in this section.
Page 249 4 FWD (Forward): Press and hold this pushbutton to DISPL (Display): Press this knob to see how long the advance quickly within a track. Press and hold this current track has been playing. ET and the elapsed pushbutton for less than two seconds to advance at six time of the track will appear on the display.
Page 250: Radio With Cassette And Cd
CD Messages Radio with Cassette and CD If the CD comes out, it could be for one of the following reasons: • It is very hot. When the temperature returns to normal, the CD should play. • You are driving on a very rough road. When the road becomes smoother, the CD should play.
Page 251 With RDS, the radio can do the following: XM™ Satellite Radio Service • Seek to stations broadcasting the selected type of XM™ is a satellite radio service that is based in the programming 48 contiguous United Stated. XM™ offers 100 coast to •...
Page 252 DISPL (Display): Press this knob to switch the display SEEK : Press the right or the left arrow to go to between the radio station frequency and the time. the next or to the previous station and stay there. When the ignition is off, press this knob to display The radio will only seek stations with a strong signal the time.
Page 253 Setting Preset Stations Setting the Tone (Bass/Treble) Up to 30 stations (six FM1, six FM2, and six AM, or AUDIO: Push and release the AUDIO knob until BASS six XM1 and six XM2 (if equipped)), can be programmed or TREB appears on the display. Turn the knob to on the six numbered pushbuttons, by performing the increase or to decrease.
Page 254 Adjusting the Speakers (Balance/Fade) 3. Once the desired PTY is displayed, press the SEEK TYPE button or one of the SEEK arrows AUDIO: To adjust the balance between the right to take you to the PTY’s ﬁrst station. and the left speakers, push and release the AUDIO 4.
Page 255 3. Once the desired PTY is displayed, press either 2. Turn the P-TYPE knob to activate program type SCAN arrow, and the radio will begin scanning select mode. TYPE and a PTY will appear on the stations in the PTY. the display.
Page 256 INFO (Information): If the current station has a If no station is found that broadcasts traffic message, the information symbol will appear on the announcements, NO TRAFFIC will appear on display. Press this button to see the message. The the display. message may display the artist, song title, call in phone If TRAF is on the display, press the TRAF button to turn numbers, etc.
Page 257 XM™ Radio Messages Radio Display Condition Action Required Message XL (Explicit Language XL on the radio display, These channels, or any others, can be blocked at a Channels) after the channel name, customer’s request, by calling 1-800-852-XMXM (9696). indicates content with explicit language.
Page 258 XM™ Radio Messages (cont’d) Radio Display Condition Action Required Message No Info Category Name No category information is available at this time on this not available channel. The system is working properly. No Info No Text/Informational No text or informational messages are available at this time message available on this channel.
Page 259: Playing A Cassette Tape
Playing a Cassette Tape If an error appears on the display, see “Cassette Tape Messages” later in this section. The tape player is built to work best with tapes that are 1 PREV (Previous): The tape must have at least three up to 30 to 45 minutes long on each side.
Page 260 3 REV (Reverse): Press this pushbutton to reverse the SCAN : To scan the tape, press and hold either tape rapidly. Press this pushbutton again to return to SCAN arrow for more than two seconds until SCAN playing speed. The radio will play while the tape appears on the display and you hear a beep.
Page 261: Cassette Tape Messages
Cassette Tape Messages CD Adapter Kits It is possible to use a portable CD player with the CHK TAPE (Check Tape): If this message appears on cassette tape player after activating the bypass feature the display, the tape will not play because of one of on the tape player.
Page 262 When a CD is inserted, the CD symbol will appear on 3 REV (Reverse): Press and hold this pushbutton to the display. As each new track starts to play, the reverse quickly within a track. Press and hold this track number will appear on the display. pushbutton for less than two seconds to reverse at six times the normal playing speed.
Page 263 CD Messages SCAN : To scan the CD, press and hold either SCAN arrow for more than two seconds until SCAN If the CD comes out, it could be for one of the appears on the display and you hear a beep. Use this following reasons: feature to listen to 10 seconds of each track of the •...
Page 264: Radio With Six-Disc Cd
Listening to a DVD Radio with Six-Disc CD If your vehicle has the Rear Seat Entertainment (RSE) system and a DVD is playing, the DVD symbol will appear on the radio display indicating that the DVD is available and can be listened to through your vehicle’s speakers.
Page 265 With RDS, the radio can do the following: XM™ Satellite Radio Service • Seek to stations broadcasting the selected type XM™ is a satellite radio service that is based in the 48 of programming contiguous Untied States. XM™ offers 100 coast to •...
Page 266 RCL (Recall): Press this knob to switch the display SEEK : Press the right or the left arrow to go to between the radio station frequency and the time. When the next or to the previous station and stay there. the ignition is off, press this knob to display the time.
Page 267 Setting Preset Stations Setting the Tone (Bass/Treble) Up to 30 stations (six FM1, six FM2, and six AM, AUDIO: Push the AUDIO knob until BASS or TREB six XM1 and six XM2 (if equipped), can be programed appears on the display. Turn the knob to increase or on the six numbered pushbuttons, by performing to decrease.
Page 268 Adjusting the Speakers (Balance/Fade) 3. Once the desired PTY is displayed, press either SEEK arrow to select the PTY and take you to the PTY’s ﬁrst station. AUDIO: To adjust the balance between the right and the left speakers, push the AUDIO knob until BAL 4.
Page 269 SCAN: Scan the stations within a PTY by performing Setting Preset PTYs (RDS Only) the following: Up to 12 PTYs (six FM1 and six FM2), can be 1. Press the P-TYPE button to activate program type programmed on the six numbered pushbuttons, by select mode.
Page 270 ALERT! will not be affected by tests of the emergency If the station does not broadcast traffic announcements, broadcast system. This feature is not supported by press this button and the radio will seek to a station all RDS stations. that does.
Page 271 XM™ Radio Messages Radio Display Condition Action Required Message XL (Explicit Language XL on the radio display, These channels, or any others, can be blocked at a Channels) after the channel name, customer’s request, by calling 1-800-852-XMXM (9696). indicates content with explicit language.
Page 272 XM™ Radio Messages (cont’d) Radio Display Condition Action Required Message No Info Category Name No category information is available at this time on this not available channel. The system is working properly. No Info No Text/Informational No text or informational messages are available at this time message available on this channel.
Page 273 Playing a CD 3. Wait for the light, located to the right of the slot, to turn green. If the ignition or radio is turned off with the CD in the 4. Load a CD. Insert the CD partway into the slot, player, it will stay in the player.
Page 274: Playing A Speciﬁc Loaded Cd
To load more than one CD but less than six, complete REMOVE CD will appear on the display. You can now Steps 1 through 3. When you have ﬁnished loading remove the CD. If the CD is not removed, after CDs, the radio will begin to play the last CD loaded.
Page 275 RPT (Repeat): With repeat, you can repeat one track AUTO EQ (Automatic Equalization): Press AUTO EQ or an entire CD. To use repeat, do the following: to select the desired equalization setting while playing a CD. The equalization will be automatically set •...
Page 276: Using Song List Mode
RCL (Recall): Press this knob to see how long the 3. Select the desired CD by pressing the numbered current track has been playing. To change the default pushbutton and then use the SEEK SCAN right on the display (track or elapsed time), press the arrow to locate the track that you want to save.
Page 277 To delete tracks from the song list, perform the If a CD is ejected, and the song list contains saved following steps: tracks from that CD, those tracks are automatically deleted from the song list. Any tracks saved to the song 1.
Page 278: Before You Drive
Listening to a DVD Parental Control If your vehicle has Rear Seat Entertainment (RSE) This button is located behind the video screen. Press system and a DVD is playing, the DVD symbol this button while a DVD or CD is playing to freeze will appear on the radio display indicating that the DVD the video and mute the audio.
Page 279: Stereo Rca Jacks
Headphones Battery Replacement To change the batteries, do the following: The RSE system includes two sets of wireless headphones. 1. Loosen the screw on the battery compartment door located on the left side of the headphone earpiece. Each set of headphones has an ON/OFF control. An indicator light will illuminate on the headphones 2.
Page 280: Audio Output
To use the auxiliary inputs on the RSE system, connect Audio Output an external auxiliary device to the color-coded RCA Audio from the DVD player or auxiliary inputs may be jacks and turn both the auxiliary device and the heard through the following possible sources: RSE system power on.
Page 281: Dvd Player
Video Screen The DVD player power may be turned on when the ignition is in RUN, ACCESSORY, or when Retained The video screen is located in the overhead console. To Accessory Power (RAP) is active. use the video screen, push forward on the release The RSE system DVD player is only compatible with latch and the screen will fold down.
Page 282 (Play/Pause): Press this button to start play of a DVD or CD. Press this button while a DVD or CD is playing to pause it. Press this button again to continue the play of the DVD or CD. (Main DVD Menu): Press this button to access the DVD menu.
Page 283: Remote Control
Playing a Disc Ejecting a Disc To play a disc, gently insert the disc with the label side Press the eject button on the DVD player faceplate to up into the loading slot. The DVD player will continue eject the disc. There is not an eject button on the loading the disc and the player will automatically start, remote control.
Page 284 Remote Control Buttons (Set-up Menu): Press this button to adjust the color, tint, brightness, contrast, display mode, and dynamic range compression. The dynamic range compression feature can be used to reduce loud audio and increase low audio produced by some DVDs. (Audio): Press this button to display a menu that will only appear when a DVD is being played.
Page 285 1 through 0 (Numeric Keypad): The numeric keypad (Enter): Press this button to select the choices provides you with the capability of direct chapter, that are highlighted in any menu. title, and track number selection. (Return): Press this button to exit the current 10 (Double Digit Entries): Press this button to active menu and return to the previous menu.
Page 286 (Play/Pause): Press this button to start play of a Problem Recommended Action DVD or CD. Press this button while a DVD or CD is No power. The ignition might not be playing to pause it. Press this button again to continue in on or accessory.
Page 287 Problem Recommended Action Problem Recommended Action In auxiliary mode, the Check the auxiliary input After stopping the player, I If the stop button was picture moves or scrolls. connections at both push Play but sometimes pressed one time, the devices. the DVD starts where I left DVD player will resume Change the Video...
Page 288: Dvd Messages
DVD Messages Problem Recommended Action Sometimes the wireless Check for obstructions, The following errors may be displayed on the headphone audio cuts low batteries, reception video screen: out or buzzes. range, and interference from cellular telephone Disc Format Error: This message will be displayed if a towers or by using your disc is inserted upside down, if the disc is not readable, cellular telephone in...
Page 289: Dvd Distortion
DVD Distortion Rear Seat Audio (RSA) There may be an experience with audio distortion in the This feature allows rear seat passengers to listen to any wireless headphones when operating cellular phones, of the sources: radio, cassette tapes, CDs, or DVDs. scanners, CB radios, Global Positioning Systems However, the rear seat passengers can only control the (GPS)*, two-way radios, mobile fax, or walkie talkies.
Page 290 SRC (Source): Press this button to select a source: radio, cassette tapes, CDs, or DVDs. SEEK : When listening to FM1, FM2, or AM, press the up or the down arrow to go to the next or to the previous station and stay there. This function is inactive if the front seat passengers are listening to the radio.
Page 291: Audio Steering Wheel Controls
When a cassette tape is playing, press this button Audio Steering Wheel Controls to go to the other side of the tape. This function is inactive if the front seat passengers are listening to a cassette tape. When a CD is playing, press this button to go to the beginning of the CD.
Page 292: Radio Reception
When a cassette tape is playing, press this button to Radio Reception play the other side of the tape. When a CD is playing in the CD changer, press this button to go to the next available CD, if multiple CDs The range for most AM stations is greater than for FM, are loaded.
Page 293: Care Of Your Cassette Tape Player
Care of Your Cassette Tape Player To prevent the cleaning cassette from being ejected, use the following steps: A tape player that is not cleaned regularly can cause 1. Turn the ignition on. reduced sound quality, ruined cassettes, or a damaged 2.
Page 294: Care Of Your Cds And Dvds
Care of Your CDs and DVDs XM™ Satellite Radio Antenna System Handle discs carefully. Store them in their original cases or other protective cases and away from direct sunlight The XM™ Satellite Radio antenna is located on the roof and dust. If the surface of a disc is soiled, dampen of your vehicle.
Page 295: Driving Your Vehicle
Section 4 Driving Your Vehicle Your Driving, the Road, and Your Vehicle ..4-2 Freeway Driving ...........4-41 Defensive Driving ...........4-2 Before Leaving on a Long Trip .......4-42 Drunken Driving ..........4-2 Highway Hypnosis ........4-43 Control of a Vehicle ........4-5 Hill and Mountain Roads ........4-44 Braking ............4-6 Winter Driving ..........4-46 Traction Assist System (TAS) ......4-9...
Page 296: Your Driving, The Road, And Your Vehicle
Your Driving, the Road, and proper defensive driving more difficult and can even cause a collision, with resulting injury. Ask a passenger to Your Vehicle help do things like this, or pull off the road in a safe place to do them yourself. These simple defensive driving techniques could save your life.
Page 297 Many adults — by some estimates, nearly half the adult same BAC by drinking three 4 ounce (120 ml) glasses population — choose never to drink alcohol, so they of wine or three mixed drinks if each had 1-1/2 ounces never drive after drinking.
Page 298 There is a gender difference, too. Women generally Statistics show that the chance of being in a collision have a lower relative percentage of body water increases sharply for drivers who have a BAC of than men. Since alcohol is carried in body water, this 0.05 percent or above.
Page 299: Control Of A Vehicle
Control of a Vehicle CAUTION: You have three systems that make your vehicle go where you want it to go. They are the brakes, the steering and the accelerator. All three systems have to do their Drinking and then driving is very dangerous. work at the places where the tires meet the road.
Page 300: Braking
Braking Avoid needless heavy braking. Some people drive in spurts — heavy acceleration followed by heavy braking — rather than keeping pace with traffic. This is Braking action involves perception time and a mistake. Your brakes may not have time to cool reaction time.
Page 301 If there is a problem with the anti-lock brake system, this warning light will stay on. See Anti-Lock Brake System Warning Light on page 3-44. Along with ABS, your vehicle has a Dynamic Rear Proportioning (DRP) system. If there is a DRP problem, both the brake and ABS warning lights will come on accompanied by a 10-second chime.
Page 302: Braking In Emergencies
The anti-lock system can change the brake pressure Remember: Anti-lock does not change the time you faster than any driver could. The computer is need to get your foot up to the brake pedal or always programmed to make the most of available tire and road decrease stopping distance.
Page 303: Supplemental Brake Assist System
Supplemental Brake Assist System If your supplemental brake assist system runs every time you apply and release the brake pedal or you notice If your vehicle has vacuum assist power brakes, it is also that the brake pedal has suddenly become much equipped with a supplemental brake assist system harder to push and the vehicle takes longer to stop, you that supplies additional vacuum to the vacuum brake...
Page 304 If your vehicle is in cruise control when the TAS begins • The vehicle is driven on an extremely rough road. to limit wheel spin, the cruise control will automatically When the vehicle leaves the rough surface, slows disengage. When road conditions allow you to safely down or stops, the light will go off and TAS will use it again, you may re-engage the cruise control.
Page 305: Manual Selectable Ride
To turn the system on or The next time you start your vehicle, the TAS will not off press the TAS on/off automatically come on. You can restore the automatic button located on the feature by repeating the same procedure. Whether instrument panel.
Page 306: Locking Rear Axle
It is recommended to use this system as follows: FIRM (Loaded): Press the button to activate this setting, the indicator light will be lit. Use this setting to • For optimum ride comfort in an unloaded vehicle minimize trailer inputs to the vehicle or when the vehicle the button should be out.
Page 307: Steering
Steering Suppose you are steering through a sharp curve. Then you suddenly accelerate. Both control systems — steering and acceleration — have to do Power Steering their work where the tires meet the road. Adding the sudden acceleration can demand too much of those If you lose power steering assist because the engine places.
Page 308: Steering In Emergencies
Steering in Emergencies There are times when steering can be more effective than braking. For example, you come over a hill and ﬁnd a truck stopped in your lane, or a car suddenly pulls out from nowhere, or a child darts out from between parked cars and stops right in front of you.
Page 309: Quadrasteer
QUADRASTEER™ The QUADRASTEER™ System has a control and diagnostic module that monitors and records current system status and operational information. If your vehicle is equipped with the 4 Wheel Steer system it has the ability to steer the vehicle with all four wheels.
Page 310 4: In this mode all four wheels will help steer the vehicle. If you want to use 4, and your vehicle is not in this mode, press the button, until the 4 indicator, located to the right of the 4-Wheel Steer button, comes on and stays on.
Page 311 To engage the 4-Wheel Steer tow mode, press the button until the 4 and tow mode indicators light up on the instrument panel. If the tow indicator is ﬂashing you will have to center the steering wheel by turning it to the left or right.
Page 312: Off-Road Recovery
Off-Road Recovery Passing You may ﬁnd that your right wheels have dropped The driver of a vehicle about to pass another on a off the edge of a road onto the shoulder while you two-lane highway waits for just the right moment, are driving.
Page 313 • • Do not get too close to the vehicle you want to Check your mirrors, glance over your shoulder and pass while you are awaiting an opportunity. For one start your left lane change signal before moving out thing, following too closely reduces your area of of the right lane to pass.
Page 314: Loss Of Control
Loss of Control If you have the Traction Assist System, remember: It helps avoid only the acceleration skid. If you do not have this system, or if the system is off, then an acceleration Let us review what driving experts say about what skid is also best handled by easing your foot off the happens when the three control systems (brakes, accelerator pedal.
Page 315: Off-Road Driving
Off-Road Driving This off-road guide is for vehicles that have four-wheel drive. Also, see Braking on page 4-6. If your vehicle is an SS Model or does not have four-wheel drive, you should not drive off-road unless you are on a level, solid surface.
Page 316 The following steps must be performed on each of the 3. Pull the push-pins and push-pins to remove the air dam: lower dam assembly away from the retainers 1. Insert a tool into the until the lower dam push-pin slot and pull is free.
Page 317: Before You Go Off-Roading
To reinstall the lower air dam, do the following: Before You Go Off-Roading 1. Line up each push-pin There are some things to do before you go out. For with its intended example, be sure to have all necessary maintenance retainer and push the and service work done.
Page 318: Loading Your Vehicle For Off-Road Driving
Loading Your Vehicle for Off-Road Driving CAUTION: There are some important things to remember about how to load your vehicle. • Cargo on the load ﬂoor piled higher than • the seatbacks can be thrown forward The heaviest things should be on the load ﬂoor and during a sudden stop.
Page 319: Environmental Concerns
Environmental Concerns Traveling to Remote Areas Off-road driving can provide wholesome and satisfying It makes sense to plan your trip, especially when going recreation. However, it also raises environmental to a remote area. Know the terrain and plan your concerns. GM recognizes these concerns and urge route.
Page 320: Scanning The Terrain
Controlling your vehicle is the key to successful off-road Scanning the Terrain driving. One of the best ways to control your vehicle Off-road driving can take you over many different kinds is to control your speed. Here are some things to keep of terrain.
Page 321: Driving On Off-Road Hills
When you drive over obstacles or rough terrain, keep a Driving on Off-Road Hills ﬁrm grip on the steering wheel. Ruts, troughs or Off-road driving often takes you up, down or across a other surface features can jerk the wheel out of your hill.
Page 322: Driving Uphill
Approaching a Hill Driving Uphill Once you decide you can safely drive up the hill, you When you approach a hill, you need to decide if it is need to take some special steps. one of those hills that is just too steep to climb, descend •...
Page 323 • • Sound the horn as you approach the top of the hill If your engine is still running, shift the transmission to let opposing traffic know you are there. to REVERSE (R), release the parking brake, and slowly back down the hill in REVERSE (R). •...
Page 324 Here are some things you must not do if you stall, or Suppose, after stalling, I try to back down the are about to stall, when going up a hill. hill and decide I just cannot do it. What • should I do? Never attempt to prevent a stall by shifting into NEUTRAL (N) (or pressing the clutch, if you have a...
Page 325: Driving Downhill
Driving Downhill CAUTION: When off-roading takes you downhill, you will want to consider a number of things: • How steep is the downhill? Will I be able to maintain Heavy braking when going down a hill can vehicle control? cause your brakes to overheat and fade. This could cause loss of control and a serious •...
Page 326: Driving Across An Incline
driving across an incline puts more weight on the Am I likely to stall when going downhill? downhill wheels. This could cause a downhill slide or a rollover. It is much more likely to happen going uphill. But if it happens going downhill, here is what to do. •...
Page 327: Stalling On An Incline
What if I am driving across an incline that is not too steep, but I hit some loose gravel and start to slide downhill. What should I do? If you feel your vehicle starting to slide sideways, turn downhill. This should help straighten out the vehicle and prevent the side slipping.
Page 328: Driving In Water
Driving in Mud, Sand, Snow or Ice CAUTION: When you drive in mud, snow or sand, your wheels will not get good traction. You can not accelerate as quickly, turning is more difficult, and you will need longer Driving on frozen lakes, ponds or rivers can be braking distances.
Page 329: After Off-Road Driving
If the water is not too deep, drive slowly through it. At After Off-Road Driving faster speeds, water splashes on your ignition Remove any brush or debris that has collected on the system and your vehicle can stall. Stalling can also underbody, chassis or under the hood.
Page 330: Driving At Night
Driving at Night Here are some tips on night driving. • Drive defensively. • Do not drink and drive. • Adjust your inside rearview mirror to reduce the glare from headlamps behind you. • Since you can not see as well, you may need to slow down and keep more space between you and other vehicles.
Page 331: Driving In Rain And On Wet Roads
You can be temporarily blinded by approaching Driving in Rain and on Wet Roads headlamps. It can take a second or two, or even several seconds, for your eyes to re-adjust to the dark. When you are faced with severe glare (as from a driver who does not lower the high beams, or a vehicle with misaimed headlamps), slow down a little.
Page 332 The heavier the rain, the harder it is to see. Even if your Driving too fast through large water puddles or even windshield wiper blades are in good shape, a heavy going through some car washes can cause problems, rain can make it harder to see road signs and too.
Page 333: Driving Through Deep Standing Water
Hydroplaning Driving Through Deep Standing Water Hydroplaning is dangerous. So much water can build up Notice: If you drive too quickly through deep under your tires that they can actually ride on the puddles or standing water, water can come in water.
Page 334: Some Other Rainy Weather Tips
Some Other Rainy Weather Tips City Driving • Turn on your low-beam headlamps – not just your parking lamps – to help make you more visible to others. • Besides slowing down, allow some extra following distance. And be especially careful when you pass another vehicle.
Page 335: Freeway Driving
Here are ways to increase your safety in city driving: Freeway Driving • Know the best way to get to where you are going. Get a city map and plan your trip into an unknown part of the city just as you would for a cross-country trip.
Page 336: Before Leaving On A Long Trip
At the entrance, there is usually a ramp that leads to When you want to leave the freeway, move to the the freeway. If you have a clear view of the freeway as proper lane well in advance. If you miss your exit, do you drive along the entrance ramp, you should begin not, under any circumstances, stop and back up.
Page 337: Highway Hypnosis
Here are some things you can check before a trip: Highway Hypnosis • Windshield Washer Fluid: Is the reservoir full? Are Is there actually such a condition as “highway all windows clean inside and outside? hypnosis”? Or is it just plain falling asleep at the wheel? •...
Page 338: Hill And Mountain Roads
Hill and Mountain Roads If you drive regularly in steep country, or if you are planning to visit there, here are some tips that can make your trips safer and more enjoyable. See Off-Road Driving on page 4-21 for information about driving off-road.
Page 339 • Stay in your own lane when driving on two-lane roads in hills or mountains. Do not swing wide CAUTION: or cut across the center of the road. Drive at speeds that let you stay in your own lane. Coasting downhill in NEUTRAL (N) or with the •...
Page 340: Winter Driving
Winter Driving Include an ice scraper, a small brush or broom, a supply of windshield washer ﬂuid, a rag, some winter outer clothing, a small shovel, a ﬂashlight, a red cloth and reﬂective warning triangles. And, if you will be driving under severe conditions, include a small bag of sand, a piece of old carpet or a couple of burlap bags to help provide traction.
Page 341 Whatever the condition — smooth ice, packed, blowing or loose snow — drive with caution. If you have traction assist, keep the system on. It will improve your ability to accelerate when driving on a slippery road. But you can turn the traction system off if your vehicle ever gets stuck in sand, mud, ice or snow.
Page 342: If You Are Caught In A Blizzard
Your anti-lock brakes improve your vehicle’s stability If You Are Caught in a Blizzard when you make a hard stop on a slippery road. Even though you have an anti-lock braking system, you will want to begin stopping sooner than you would on dry pavement.
Page 343 • Put on extra clothing or wrap a blanket around you. If you have no blankets or extra clothing, make CAUTION: body insulators from newspapers, burlap bags, rags, ﬂoor mats — anything you can wrap around yourself or tuck under your clothing to keep warm. Snow can trap exhaust gases under your vehicle.
Page 344: If You Are Stuck: In Sand, Mud, Ice Or Snow
Then, shut the engine off and close the window almost all the way to preserve the heat. Start the engine CAUTION: again and repeat this only when you feel really uncomfortable from the cold. But do it as little as possible.
Page 345: Rocking Your Vehicle To Get It Out
Rocking Your Vehicle To Get It Out First, turn your steering wheel left and right. That will clear the area around your front wheels. If you have a four-wheel-drive vehicle, shift into 4HI. If your vehicle has the Traction Assist System, you should turn it off by pressing the TAS on/off button.
Page 346: Towing
Notice: Never use recovery hooks to tow the vehicle. Your vehicle could be damaged and it would not be covered by warranty. Towing Towing Your Vehicle Consult your dealer or a professional towing service if you need to have your disabled vehicle towed. See Roadside Assistance Program on page 7-6.
Page 347: Recreational Vehicle Towing
Recreational Vehicle Towing Dinghy Towing Recreational vehicle towing means towing your vehicle behind another vehicle – such as behind a motorhome. The two most common types of recreational vehicle towing are known as dinghy towing, towing your vehicle will all four wheels on the ground, and dolly towing, towing your vehicle with two wheels on the ground and two wheels up on a device known as a “dolly”.
Page 348 Four-Wheel-Drive Vehicles Equipped with Transfer Case (NP1, NP2 and NP8) and CAUTION: All-Wheel-Drive Vehicles Notice: Towing an all-wheel-drive vehicle with all Shifting a four-wheel-drive vehicle’s transfer four wheels on the ground, or even with only two of case into NEUTRAL can cause your vehicle to its wheels on the ground, will damage drivetrain roll even if the transmission is in Park (P) for components.
Page 349: Dolly Towing
Dolly Towing Two-wheel-drive vehicles should not be towed with the rear wheels on the ground. Two-wheel-drive transmissions have no provisions for internal lubrication while being towed. Two-wheel-drive vehicles can be dolly towed with the front wheels on the ground provided that the wheels are straight and the steering column has been locked.
Page 350: Loading Your Vehicle
4. Firmly set the parking brake. Loading Your Vehicle 5. Securely attach the vehicle being towed to the It is very important to know how much weight your tow dolly. vehicle can carry. This weight is called the vehicle capacity weight and includes the weight of all occupants, cargo and all nonfactory-installed options.
Page 351 Tire and Loading Information Label The Tire and Loading Information label also tells you the size and recommended inﬂation pressure for the original equipment tires on your vehicle. For more information on tires and inﬂation see Tires on page 5-74 and Inﬂation - Tire Pressure on page 5-82 If your vehicle does not have the Tire and Loading Information label, the Certiﬁcation/Tire label shows the...
Page 352 4. The resulting ﬁgure equals the available amount of cargo and luggage load capacity. For example, if the “XXX” amount equals 1400 lbs. and there will be ﬁve 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1400 −...
Page 353 Example 2 Example 3 Loading Your Vehicle Loading Your Vehicle Item Description Total Item Description Total Vehicle Capacity Weight 1,000 lbs Vehicle Capacity Weight 1,000 lbs for Example 2 = (453 kg) for Example 3 = (453 kg) Subtract Occupant Subtract Occupant 1,000 lbs Weight 150 lbs...
Page 354 Certiﬁcation/Tire Label The Certiﬁcation/Tire label also tells you the maximum weights for the front and rear axles, called Gross Axle Weight Rating (GAWR). To ﬁnd out the actual loads on your front and rear axles, you need to go to a weigh station and weigh your vehicle.
Page 355 CAUTION: CAUTION: Do not load your vehicle any heavier than the Things you put inside your vehicle can strike GVWR, or either the maximum front or rear and injure people in a sudden stop or turn, or GAWR. If you do, parts on your vehicle can in a crash.
Page 356: Two-Tiered Loading
Payload When using this upper load platform, be sure the load is securely tied down to prevent it from shifting. The Payload capacity is the maximum load capacity that load’s center of gravity should be positioned in a zone your vehicle can carry. Be sure to include the weight of over the rear axle.
Page 357: Adding A Snow Plow Or Similar Equipment
Remember not to exceed the Gross Axle Weight Rating Adding a Snow Plow or Similar (GAWR) of the front or rear axle. Equipment *Equipment Maximum Weight Before installing a snow plow on your vehicle, here are some things you will need to know: Ladder Rack and Cargo 750 lbs.
Page 358 Here are some guidelines for safely carrying a snow How heavy can a snow plow safely be? plow on your vehicle: The plow your vehicle can carry depends on many • Make sure the weight on the front and rear axles things, such as: does not exceed the axle rating for each.
Page 359 In order to calculate the amount of weight any front What is front axle reserve capacity, and how do accessory, such as a snow plow, is adding to the front I calculate it? axle, use the following formula: Front axle reserve capacity is the difference between your front GAWR and the front axle weight of your truck with full fuel and passengers.
Page 360 For example, adding a 700 lb. (318 kg) snow plow actually adds more than 700 lb. (318 kg) to the front CAUTION: axle. Using the formula, if the snow plow is 4 ft. (122 cm) in front of the front axle and the wheel base is 10 ft. (305 cm), then: On some vehicles equipped with certain front W = 700 lb.
Page 361: Truck-Camper Loading Information
Truck-Camper Loading Information What is total vehicle reserve capacity? This is the difference between your GVWR and the Notice: Installing a truck-camper to a vehicle that is weight of your truck with full fuel and passengers. It equipped with the SS trim package could damage is the amount of weight you can add to your the vehicle.
Page 362 Refer to the Truck-Camper Loading Information label in Here is an example of proper truck and camper match: glove box for dimensions A and B as shown in the following illustration. A. Camper Center of Gravity B. Recommended Center of Gravity Location Zone Use the rear edge of the load ﬂoor for measurement The camper’s center of gravity should fall within the purposes.
Page 363: Trailer Recommendations
Your dealer can help you make a good vehicle-camper Trailer Recommendations match and help you determine the CWR. You must subtract your hitch loads from the CWR for After you’ve loaded your vehicle and camper, drive to a your vehicle. Weigh your vehicle with the trailer weigh station and weigh the front and rear wheels attached, so that you won’t go over the GVWR or separately.
Page 364: Towing A Trailer
Towing a Trailer If yours was built with trailering options, as many are, it’s ready for heavier trailers. But trailering is different than just driving your vehicle by itself. Trailering means changes in acceleration, braking, handling, durability CAUTION: and fuel economy. Successful, safe trailering takes correct equipment, and it has to be used properly.
Page 365 • Tow/Haul Mode Don’t tow a trailer at all during the ﬁrst 500 miles (800 km) your new vehicle is driven. Your engine, Tow/Haul is a feature on automatic transmission axle or other parts could be damaged. equipped vehicles that assists when pulling a heavy •...
Page 366: Weight Of The Trailer
Tow/Haul is designed to be most effective when the Weight of the Trailer vehicle and trailer combined weight is at least 75% of How heavy can a trailer safely be? the vehicle’s Gross Combined Weight Rating (GCWR). See “Weight of the Trailer” later in the section. It depends on how you plan to use your rig.
Page 367 Vehicle* Axle Ratio Maximum Trailer Weight GCWR C-1500 Regular Cab Short Box (2WD)* 3.08 4,600 lbs. (2 087kg) 9,000 lbs. (4 082 kg) 4300 V6 (Auto) 3.42 5,100 lbs. (2 313kg) 9,500 lbs. (4 309 kg) 3.08 3,600 lbs. (1 633 kg) 8,000 lbs.
Page 368 Vehicle* Axle Ratio Maximum Trailer Weight GCWR C-1500 Extended Cab Short Box (2WD)* 3.42 4,700 lbs. (2 133 kg) 9,500 lbs. (4 309 kg) 4300 V6 (Auto) 3.73 5,200 lbs. (2 360 kg) 10,000 lbs. (4 536 kg) 4300 V6 (Manual) 3.42 3,700 lbs.
Page 369 Vehicle* Axle Ratio Maximum Trailer Weight GCWR C-1500 Crew Cab (2WD)* 3.42 6,800 lbs. (3 084 kg) 12,000 lbs. (5 443 kg) 5300 V8 3.73 7,800 lbs. (3 538 kg) 13,000 lbs. (5 897 kg) Vehicle* Axle Ratio Maximum Trailer Weight GCWR C-1500 Regular Cab Long Box (2WD)* 3.08...
Page 370 Vehicle* Axle Ratio Maximum Trailer Weight GCWR C-1500 Extended Cab Long Box (2WD)* 3.42 5,900 lbs. (2 676 kg) 11,000 lbs. (4 994 kg) 4800 V8 (Auto) 3.73 6,900 lbs. (3 129 kg) 12,000 lbs. (5 448 kg) 3.42 3,900 lbs. (1 769 kg) 9,000 lbs.
Page 371 Vehicle* Axle Ratio Maximum Trailer Weight GCWR K-1500 Extended Cab Short Box (4WD)* 3.73 6,800 lbs. (3 084 kg) 12,000 lbs. (5 443 kg) 4800 V8 (Auto) 4.10 7,800 lbs. (3 538 kg)** 13,000 lbs. (5 897 kg) 3.73 4,800 lbs. (2 177 kg) 10,000 lbs.
Page 372 Vehicle* Axle Ratio Maximum Trailer Weight GCWR K-1500 Regular Cab Long Box (4WD)* 3.42 4,600 lbs. (2 086 kg) 9,500 lbs. (4 309 kg) 4300 V6 (Auto) 3.73 5,100 lbs. (2 313 kg) 10,000 lbs. (4 536 kg) 3.42 3,600 lbs. (1 632 kg) 8,500 lbs.
Page 373 Vehicle* Axle Ratio Maximum Trailer Weight GCWR Silverado SS 6000 V8 4.10 7,600 lbs. (3 447 kg) 13,000 lbs. (5 897 kg) Vehicle* Axle Ratio Maximum Trailer Weight GCWR C-2500 LD (2WD)* 3.73 8,700 lbs. (3 946 kg) 14,000 lbs. (6 356 kg) 6000 V8 4.10 10,700 lbs.
Page 374 Vehicle* Axle Ratio Maximum Trailer Weight GCWR C-2500 Extended Cab Long Box HD (2WD)* 6000 V8 4.10 10,200 lbs. (4 626 kg) 16,000 lbs. (7 257 kg) 3.73 12,000 lbs. (5 443 kg) 20,000 lbs. (9 072 kg) 8100 V8 4.10 12,000 lbs.
Page 375 Vehicle* Axle Ratio Maximum Trailer Weight GCWR K-2500 LD (4WD)* 3.73 8,300 lbs. (3 765 kg) 14,000 lbs. (6 350 kg) 6000 V8 4.10 10,300 lbs. (4 672 kg) 16,000 lbs. (7 257 kg) *Fifth-wheel or gooseneck kingpin weight should be 15 percent to 25 percent of trailer weight up to 2,500 lbs.
Page 376 Vehicle* Axle Ratio Maximum Trailer Weight GCWR K-2500 Extended Cab Long Box HD (4WD)** 6000 V8 4.10 9,900 lbs. (4 490 kg) 16,000 lbs. (7 257 kg) 3.73 12,000 lbs. (5 443 kg) 20,000 lbs. (9 072 kg) 8100 V8 4.10 12,000 lbs.
Page 377 Vehicle* Axle Ratio Maximum Trailer Weight GCWR C-3500 Extended Cab (2WD) 6000 V8 4.10 9,800 lbs. (4 445 kg) 16,000 lbs. (7 257 kg) 8100 V8 4.10 15,400 lbs. (6 985 kg)** 22,000 lbs. (9 979 kg) 6.6L V8 Diesel (Manual) 3.73 15,200 lbs.
Page 378 Vehicle* Axle Ratio Maximum Trailer Weight GCWR K-3500 Regular Cab (4WD) 6000 V8 Dual 4.10 9,900 lbs. (4 490 kg) 16,000 lbs. (7 257 kg) Rear Wheel 6000 V8 Single 4.10 10,100 lbs. (4 581 kg) 16,000 lbs. (7 257 kg) Rear Wheel 8100 V8 Dual 4.10...
Page 379 Vehicle* Axle Ratio Maximum Trailer Weight GCWR K-3500 Extended Cab (4WD)* 6000 V8 Dual 4.10 9,500 lbs. (4 309 kg) 16,000 lbs. (7 257 kg) Rear Wheel 6000 V8 Single 4.10 9,700 lbs. (4 399 kg) 16,000 lbs. (7 257 kg) Rear Wheel 8100 V8 Dual 4.10...
Page 380 Vehicle* Axle Ratio Maximum Trailer Weight GCWR K-3500 Crew Cab (4WD)* 6000 V8 Dual 4.10 9,300 lbs. (4 218 kg) 16,000 lbs. (7 264 kg) Rear Wheel 6000 V8 Single 4.10 9,500 lbs. (4 309 kg) 16,000 lbs. (7 264 kg) Rear Wheel 8100 V8 Dual 4.10...
Page 381: Weight Of The Trailer Tongue
The Gross Combination Weight Rating (GCWR) is the that weight, too. See Loading Your Vehicle on page 4-56 total allowable weight of the completely loaded for more information about your vehicle’s maximum vehicle and trailer including any passengers, cargo, load capacity. equipment and conversions.
Page 382: Total Weight On Your Vehicle's Tires
Fifth wheel or gooseneck kingpin weight should be 15 to Total Weight on Your Vehicle’s Tires 25 percent of the trailer weight up to the maximum Be sure your vehicle’s tires are inﬂated to the upper limit amount speciﬁed in the trailering chart for your vehicle. for cold tires.
Page 383: Fifth Wheel And Gooseneck Trailering
Weight Distributing Hitches and Weight If you use a step-bumper hitch, the bumper could be damaged in sharp turns. Make sure there is ample room Carrying Hitches when turning to avoid contact between the trailer and the bumper. If you will be pulling a trailer that, when loaded, will weigh more than 5,000 lbs (2 270 kg) be sure to use a properly mounted weight-distributing hitch and sway control of the proper size.
Page 384: Trailer Brakes
The hitch should be located in the pickup bed so that If you are towing with an aftermarket hitch follow the it’s centerline is over or slightly in front of the rear axle. trailer or hitch manufacturer’s recommendation for Take care that it is not so far forward that it will attaching safety chains.
Page 385: Driving With A Trailer
Driving with a Trailer Towing a trailer requires a certain amount of experience. Before setting out for the open road, you’ll want to get to know your rig. Acquaint yourself with the feel of handling and braking with the added weight of the trailer. CAUTION: And always keep in mind that the vehicle you are driving is now a good deal longer and not nearly as...
Page 386: Turn Signals When Towing A Trailer
Passing Turn Signals When Towing a Trailer You’ll need more passing distance up ahead when The arrows on your instrument panel will ﬂash whenever you’re towing a trailer. And, because you’re a good deal you signal a turn or lane change. Properly hooked up, longer, you’ll need to go much farther beyond the the trailer lamps will also ﬂash, telling other drivers passed vehicle before you can return to your lane.
Page 387: Parking On Hills
If you have a 5-speed manual transmission and you are Parking on Hills towing a trailer, it’s better not to use FIFTH (5) gear. Just drive in FOURTH (4) gear (or, as you need to, a lower gear). CAUTION: If you have a 6-speed manual transmission and you are towing a trailer, it’s better not to use SIXTH (6) You really should not park your vehicle, with a gear.
Page 388: Maintenance When Trailer Towing
5. If you have a four-wheel-drive vehicle, be sure When You Are Ready to Leave After the transfer case is in a drive gear and not Parking on a Hill in NEUTRAL. 1. Apply your regular brakes and hold the pedal down 6.
Page 389: Trailer Wiring Harness
Trailer Wiring Harness The six-wire harness contains the following trailer circuits: Your vehicle is equipped with one of the following • Yellow: Left Stop/Turn Signal wiring harnesses for towing a trailer or hauling a • slide-in camper. Dark Green: Right Stop/Turn Signal •...
Page 390: Heavy-Dutytrailer Wiring Harness Package
Heavy-DutyTrailer Wiring The eight-wire harness contains the following trailer circuits: Harness Package • Yellow: Left Stop/Turn Signal • Dark Green: Right Stop/Turn Signal • Brown: Taillamps • White: Ground • Light Green: Back-up Lamps • Light Blue: CHMSL • Red: Battery Feed •...
Page 391 Camper/Fifth-Wheel Trailer Wiring Package The eight-wire camper harness is located under the front edge of the pickup box on the driver’s side of the vehicle, attached to the frame bracket. A connector will have to be added to the wiring harness which connects to the camper.
Page 392 Instrument Panel Jumper Wiring Harness CAUTION: Be sure to use only the correct trailer brake harness, the one intended for use on your vehicle. If you use some other trailer brake harness, even if it seems to ﬁt, your trailer brakes may not work at all.
Page 393 Four-Wire Harness Adapter This adapter is included with your vehicle as part of the heavy-duty trailer wiring package. Use this adapter to connect a standard four-way Connect the adapter with the tab pointing up (see round pin connector to the seven-wire harness on your vehicle.
Page 394: Power Take-Off (Pto)
Auxiliary Battery Notice: Leaving electrical equipment on for extended periods will drain the battery. Always turn The auxiliary battery provision can be used to supply off electrical equipment when not in use and do electrical power to additional equipment that you not use equipment that exceeds the maximum may choose to add, such as a slide-in camper.
Page 395 6. Release the clutch and regular brakes as you 4. Select the desired engine speed for PTO operation. normally would. When the clutch is released, Read the following preset mode information the PTO will start. regarding operation. 7. Turn the PTO rotary switch to ON. Preset Mode: PTO speed control mode is used for stationary applications.
Page 396: Step-Bumper Pad
To use PTO speed control in variable mode (while by your dealer or body upﬁtter. If the PTO software stationary) do the following: settings do not match the settings shown here, then they may have already been altered in order to satisfy 1.
Page 397: Service And Appearance Care
Section 5 Service and Appearance Care Service ............5-3 Engine Coolant ..........5-35 Doing Your Own Service Work ......5-4 Coolant Surge Tank Pressure Cap ....5-38 Adding Equipment to the Outside of Engine Overheating ........5-38 Your Vehicle ..........5-5 Cooling System ..........5-41 Engine Fan Noise .........5-46 Fuel ..............5-5 Power Steering Fluid ........5-46 Gasoline Octane ..........5-5...
Page 398 Section 5 Service and Appearance Care Pickup Box Identiﬁcation and Fender Appearance Care ..........5-114 Marker Lamps ...........5-69 Cleaning the Inside of Your Vehicle ....5-114 Taillamps .............5-70 Care of Safety Belts ........5-117 Replacement Bulbs ........5-72 Weatherstrips ..........5-117 Cleaning the Outside of Your Vehicle .....5-117 Windshield Wiper Blade Replacement ....5-73 Sheet Metal Damage ........5-120 Tires ..............5-74...
Page 399: Service
Service California Proposition 65 Warning Most motor vehicles, including this one, contain and/or Your dealer knows your vehicle best and wants you to emit chemicals known to the State of California to be happy with it. We hope you will go to your dealer cause cancer and birth defects or other reproductive for all your service needs.
Page 400: Doing Your Own Service Work
Doing Your Own Service Work CAUTION: If you want to do some of your own service work, you will want to use the proper service manual. It tells you much more about how to service your vehicle than You can be injured and your vehicle could be this manual can.
Page 401: Adding Equipment To The Outside Of Your Vehicle
Adding Equipment to the Outside of Gasoline Octane Your Vehicle For all except the Silverado SS model, use regular unleaded gasoline with a posted octane of 87 or higher. Things you might add to the outside of your vehicle can If the octane is less than 87, you may get a heavy affect the airﬂow around it.
Page 402: Gasoline Speciﬁcations
Gasoline Speciﬁcations California Fuel It is recommended that gasoline meet speciﬁcations If your vehicle is certiﬁed to meet California Emission which were developed by automobile manufacturers Standards (see the underhood emission control label), around the world and contained in the World-Wide it is designed to operate on fuels that meet California Fuel Charter which is available from the Alliance of speciﬁcations.
Page 403: Additives
Additives Notice: Your vehicle was not designed for fuel that contains methanol. Do not use fuel containing methanol. It can corrode metal parts in your fuel To provide cleaner air, all gasolines in the United States system and also damage the plastic and rubber are now required to contain additives that will help parts.
Page 404: Fuel E-85 (85% Ethanol)
Fuel E-85 (85% Ethanol) To insure quick starts in the wintertime, the E-85 fuel must be formulated properly for your climate according The 8th digit of your vehicle identiﬁcation number (VIN) to ASTM speciﬁcation D 5798. If you have trouble shows the code letter or number that identiﬁes your starting on E-85, it may be because your E-85 fuel is engine.
Page 405: Fuels In Foreign Countries
Fuels in Foreign Countries Filling Your Tank If you plan on driving in another country outside the United States or Canada, the proper fuel may be hard CAUTION: to ﬁnd. Never use leaded gasoline or any other fuel not recommended in the previous text on fuel. Costly repairs caused by use of improper fuel would not Fuel vapor burns violently and a fuel ﬁre can be covered by your warranty.
Page 406 Before refueling, slide the edge of the fuel cap onto the The cap will hang on the hook during refueling. ﬁller door hook. CAUTION: If a ﬁre starts while you are refueling, do not remove the nozzle. Shut off the ﬂow of fuel by shutting off the pump or by notifying the station attendant.
Page 407: Filling A Portable Fuel Container
Be careful not to spill fuel. Do not top off or overﬁll your Filling a Portable Fuel Container tank and wait a few seconds after you have ﬁnished pumping before you remove the nozzle. Clean any spilled fuel from painted surfaces as soon as possible. CAUTION: See Cleaning the Outside of Your Vehicle on page 5-117.
Page 408: Checking Things Under The Hood
Checking Things Under Hood Release the Hood To open the hood do the following: 1. Pull the handle inside the vehicle located CAUTION: under and to the left of the steering wheel. Things that burn can get on hot engine parts and start a ﬁre.
Page 409 2. Then go to the front of the vehicle and pull up on the secondary hood release located near the center of the grill. 3. Lift the hood. Before closing the hood, be sure all ﬁller caps are on properly. Pull down the hood and close it ﬁrmly. 5-13...
Page 410: Engine Compartment Overview
Engine Compartment Overview When you lift up the hood on the VORTEC™ 4300 V6 engine, you’ll see the following: 5-14...
Page 411 A. Engine Air Cleaner/Filter. See Engine Air H. Power Steering Fluid Reservoir. See Power Steering Cleaner/Filter on page 5-25. Fluid on page 5-46. B. Coolant Surge Tank. See Engine Coolant on I. Remote Negative (−) Terminal (GND). See Jump page 5-35. Starting on page 5-53.
Page 412 When you lift up the hood on the VORTEC™ 5300 V8 engine (VORTEC™ 4800 and 6000 V8 engines similar), you will see the following: 5-16...
Page 413 A. Engine Air Cleaner/Filter. See Engine Air H. Remote Negative (−) Terminal (GND). See Jump Cleaner/Filter on page 5-25. Starting on page 5-53. B. Coolant Surge Tank. See Engine Coolant on I. Power Steering Fluid Reservoir. See Power Steering page 5-35. Fluid on page 5-46.
Page 414 When you lift up the hood on the VORTEC™ 8100 V8 engine you will see the following: 5-18...
Page 415 A. Engine Air Cleaner/Filter. See Engine Air H. Remote Negative (−) Terminal (GND). See Jump Cleaner/Filter on page 5-25. Starting on page 5-53. B. Coolant Surge Tank. See Engine Coolant on I. Remote Positive (+) Terminal. See Jump Starting on page 5-35.
Page 416: Engine Oil
Engine Oil Pull out the dipstick and clean it with a paper towel or cloth, then push it back in all the way. Remove it again, keeping the tip down, and check the level. If your vehicle has a diesel engine, see “Engine Oil” in the Diesel Engine Supplement.
Page 417: When To Add Engine Oil
When to Add Engine Oil See Engine Compartment Overview on page 5-14 for If the oil is at or below the cross-hatched area at the tip the location of the of the dipstick, then you will need to add at least one engine oil ﬁll cap.
Page 418: What Kind Of Engine Oil To Use
What Kind of Engine Oil to Use Look for two things: • GM6094M Your vehicle’s engine requires oil meeting GM Standard GM6094M. You should look for and use only an oil that meets GM Standard GM6094M. 5-22...
Page 419: Engine Oil Additives
• Notice: Use only engine oil identiﬁed as meeting SAE 5W-30 GM Standard GM6094M and showing the American As shown in the viscosity chart, SAE 5W-30 is best Petroleum Institute Certiﬁed For Gasoline Engines for your vehicle. However, if it is going to be 0°F starburst symbol.
Page 420 When to Change Engine Oil (GM Oil How to Reset the CHANGE ENGINE OIL Message Life System) The GM Oil Life System calculates when to change Your vehicle has a computer system that lets you know your engine oil and ﬁlter based on vehicle use. Anytime when to change the engine oil and ﬁlter.
Page 421: What To Do With Used Oil
What to Do with Used Oil Engine Air Cleaner/Filter Used engine oil contains certain elements that may be See Engine Compartment unhealthy for your skin and could even cause cancer. Overview on page 5-14 for Do not let used oil stay on your skin for very long. Clean location of engine air your skin and nails with soap and water, or a good cleaner/ﬁlter and change...
Page 422: How To Inspect
How to Inspect Locate the ﬁlter change indicator. When the change indicator turns black or is in the red/orange “change” zone, replace the ﬁlter and reset the indicator. To inspect the air cleaner/ﬁlter, remove the ﬁlter from the vehicle and lightly shake ﬁlter to release loose dust and dirt.
Page 423: Automatic Transmission Fluid
Automatic Transmission Fluid ® CAUTION: (Except Allison Transmission When to Check and Change Operating the engine with the air cleaner/ﬁlter off can cause you or others to be burned. A good time to check your automatic transmission ﬂuid The air cleaner not only cleans the air, it helps level is when the engine oil is changed.
Page 424: How To Check
How to Check To get the right reading, the ﬂuid should be at normal operating temperature, which is 180°F to 200°F Because this operation can be a little difficult, you (82°C to 93°C). may choose to have this done at the dealership Get the vehicle warmed up by driving about 15 miles service department.
Page 425 Checking the Fluid Level See Engine Compartment Overview on page 5-14 for more information on location. Prepare your vehicle as follows: 1. Flip the handle up and then pull out the dipstick • Park your vehicle on a level place. Keep the and wipe it with a clean rag or paper towel.
Page 426: How To Add Fluid
How to Add Fluid Automatic Transmission Fluid ® (Allison Transmission Refer to the Maintenance Schedule to determine what kind of transmission ﬂuid to use. See Recommended When to Check and Change Fluids and Lubricants on page 6-13. Add ﬂuid only after checking the transmission ﬂuid while A good time to check your automatic transmission ﬂuid it is hot.
Page 427 How to Check Checking the Fluid Level Prepare your vehicle as follows: Because this operation can be a little difficult, you may choose to have this done at the dealership • Park your vehicle on a level place. Keep the service department.
Page 428 3. Check the ﬂuid level reading. Repeat the check 3. Push it back in all the way, wait three seconds and procedure to verify the reading. then pull it back out again. Repeat the check procedure to verify the reading. 4.
Page 429: Manual Transmission Fluid
How to Add Fluid Manual Transmission Fluid Refer to the Maintenance Schedule to determine what When to Check kind of transmission ﬂuid to use. See Recommended Fluids and Lubricants on page 6-13. A good time to have it checked is when the engine oil is changed.
Page 430: Hydraulic Clutch
Then, follow these steps: How to Add Fluid Here’s how to add ﬂuid. Refer to the Maintenance Schedule to determine what kind of ﬂuid to use. See Recommended Fluids and Lubricants on page 6-13. 1. Remove the ﬁller plug. 2. Add ﬂuid at the ﬁller plug hole. Add only enough ﬂuid to bring the ﬂuid level up to the bottom of the ﬁller plug hole.
Page 431: Engine Coolant
When to Check and What to Use Engine Coolant The cooling system in your vehicle is ﬁlled with The clutch master cylinder ® DEX-COOL engine coolant. This coolant is designed reservoir is located in the to remain in your vehicle for 5 years or 150,000 miles rear of the engine (240 000 km), whichever occurs ﬁrst, if you add only compartment on the...
Page 432: Checking Coolant
What to Use Notice: If you use an improper coolant mixture, your engine could overheat and be badly damaged. Use a mixture of one-half clean, drinkable water and The repair cost would not be covered by your ® one-half DEX-COOL coolant which won’t damage warranty.
Page 433 Adding Coolant CAUTION: ® If you need more coolant, add the proper DEX-COOL coolant mixture at the surge tank, but only when the engine is cool. Turning the surge tank pressure cap when the engine and radiator are hot can allow steam and scalding liquids to blow out and burn you CAUTION: badly.
Page 434: Coolant Surge Tank Pressure Cap
Coolant Surge Tank Pressure Cap Engine Overheating You will ﬁnd a coolant temperature gage on your See Engine Compartment vehicle’s instrument panel. See Engine Coolant Overview on page 5-14 Temperature Gage on page 3-46. In addition, you will for more information ﬁnd a ENGINE OVERHEATED and a REDUCED on location.
Page 435: If Steam Is Coming From Your Engine
If Steam Is Coming From Your Engine CAUTION: (Continued) from the vehicle until it cools down. Wait until there is no sign of steam or coolant before you open the hood. If you keep driving when your engine is overheated, the liquids in it can catch ﬁre. You or others could be badly burned.
Page 436: If No Steam Is Coming From Your Engine
If No Steam Is Coming From 3. If you’re in a traffic jam, shift to NEUTRAL (N); otherwise, shift to the highest gear while Your Engine driving – AUTOMATIC OVERDRIVE An overheat warning, along with a low coolant condition, DRIVE (D) for automatic transmissions. can indicate a serious problem.
Page 437: Cooling System
Cooling System When you decide it’s safe to lift the hood, here’s what you’ll see: All Other Engines A. Coolant Surge Tank B. Coolant Surge Tank Pressure Cap C. Engine Fan 8100 V8 Engines If the coolant inside the coolant surge tank is boiling, don’t do anything else until it cools down.
Page 438 The coolant level should If there seems to be no leak, start the engine again. be at or above the FULL The engine cooling fan speed should increase when idle COLD mark. If it isn’t, speed is doubled by pushing the accelerator pedal you may have a leak at the down.
Page 439 How to Add Coolant to the Coolant CAUTION: (Continued) Surge Tank for Gasoline Engines If you haven’t found a problem yet, check to see if coolant surge tank pressure cap, is hot. Wait coolant is visible in the surge tank. If coolant is visible for the cooling system and coolant surge tank but the coolant level isn’t at or above the FULL pressure cap to cool if you ever have to turn...
Page 440 CAUTION: CAUTION: Adding only plain water to your cooling You can be burned if you spill coolant on hot system can be dangerous. Plain water, or engine parts. Coolant contains ethylene glycol some other liquid such as alcohol, can boil and it will burn if the engine parts are hot before the proper coolant mixture will.
Page 441 4. Then ﬁll the coolant surge tank with the proper 5. With the coolant surge tank pressure cap off, start mixture, to the FULL COLD mark. the engine and let it run until you can feel the upper radiator hose getting hot. Watch out for the engine cooling fan.
Page 442: Engine Fan Noise
6. Then replace the system functioning properly. The fan will slow pressure cap. Be sure down when additional cooling is not required and the the pressure cap is clutch disengages. hand-tight and You may also hear this fan noise when you start fully seated.
Page 443: Windshield Washer Fluid
How to Check Power Steering Fluid Turn the key off, let the engine compartment cool down, wipe the cap and the top of the reservoir clean, then unscrew the cap and wipe the dipstick with a clean rag. Replace the cap and completely tighten it. Then remove the cap again and look at the ﬂuid level on the dipstick.
Page 444: Adding Washer Fluid
Adding Washer Fluid Notice: • When using concentrated washer ﬂuid, Your vehicle has a low washer ﬂuid message that follow the manufacturer’s instructions for comes on when the washer ﬂuid is low. The message is adding water. displayed for 15 seconds at the start of each ignition •...
Page 445: Brakes
Brakes CAUTION: Brake Fluid Your brake master cylinder reservoir is ﬁlled with DOT-3 If you have too much brake ﬂuid, it can spill on brake ﬂuid. See Engine Compartment Overview on the engine. The ﬂuid will burn if the engine is page 5-14 for the location of the reservoir.
Page 446: Checking Brake Fluid
Checking Brake Fluid What to Add You can check the brake ﬂuid without taking off the cap. When you do need brake ﬂuid, use only DOT-3 brake ﬂuid. Use new brake ﬂuid from a sealed container only. See Recommended Fluids and Lubricants on page 6-13.
Page 447: Brake Adjustment
• Notice: Continuing to drive with worn-out brake If you spill brake ﬂuid on your vehicle’s painted pads could result in costly brake repair. surfaces, the paint ﬁnish can be damaged. Be careful not to spill brake ﬂuid on your vehicle. If Some driving conditions or climates may cause a brake you do, wash it off immediately.
Page 448: Battery
Replacing Brake System Parts Battery The braking system on a vehicle is complex. Its many Your new vehicle comes with a maintenance free parts have to be of top quality and work well together if ® ACDelco battery. When it is time for a new battery, get the vehicle is to have really good braking.
Page 449: Vehicle Storage
Vehicle Storage Jump Starting If you are not going to drive your vehicle for 25 days If your battery (or batteries) has run down, you may or more, remove the black, negative (−) cable from want to use another vehicle and some jumper cables to the battery.
Page 450 Notice: If the other vehicle’s system is not a 12-volt Notice: If you leave your radio or other accessories system with a negative ground, both vehicles can on during the jump starting procedure, they could be damaged. Only use vehicles with 12-volt systems be damaged.
Page 451 On V6 engines the remote negative (−) terminal is located on a tab attached to the engine accessory CAUTION: drive bracket where it is marked “GND.” See Engine Compartment Overview on page 5-14 for more information on location. Fans or other moving engine parts can injure you badly.
Page 452 7. Connect the red 9. Now connect the black positive (+) cable to the negative (−) cable to positive (+) terminal the negative (−) of the vehicle with the terminal of the good dead battery. Use battery. Use a remote a remote positive (+) negative (−) terminal if terminal if the...
Page 453 V8 Engine 8.1L Engine V8 Engine, Diesel Similar 11. Connect the other end of the negative (−) cable to the remote negative (−) terminal, marked GND, on the vehicle with the dead battery. 12. Now start the vehicle with the good battery and run the engine for a while.
Page 454: All-Wheel Drive
Notice: If the jumper cables are removed in the To disconnect the jumper cables from both vehicles do wrong order, electrical shorting may occur and the following: damage the vehicle. The repairs would not be 1. Disconnect the black negative (−) cable from the covered by your warranty.
Page 455: Rear Axle
How to Check Lubricant Rear Axle When to Check Lubricant It is not necessary to regularly check rear axle ﬂuid unless you suspect there is a leak or you hear an unusual noise. A ﬂuid loss could indicate a problem. Have it inspected and repaired.
Page 456: Four-Wheel Drive
To get an accurate reading, the vehicle should be on a Transfer Case level surface. When to Check Lubricant • The proper level for the 1500 Series is from It is not necessary to regularly check transfer case ﬂuid 5/8 inch to 1 5/8 inch (15 mm to 40 mm) below the unless you suspect there is a leak or you hear an bottom of the ﬁller plug hole.
Page 457: Noise Control System
When to Change Lubricant Refer to the Maintenance Schedule to determine how often to change the lubricant. See Scheduled Maintenance on page 6-4. What to Use Refer to the Maintenance Schedule to determine what kind of lubricant to use. See Recommended Fluids and Lubricants on page 6-13.
Page 458 These standards apply only to vehicles sold in the Engine: United States. • Removal or rendering engine speed governor Federal law prohibits the following acts or the (if equipped) inoperative so as to allow engine causing thereof: speed to exceed manufacturer speciﬁcations. 1.
Page 459: Bulb Replacement
Bulb Replacement Headlamps For any bulb changing procedure not listed in this section, contact your dealer. See Replacement Bulbs on page 5-72 for the proper types of bulbs to use. Halogen Bulbs CAUTION: Halogen bulbs have pressurized gas inside and can burst if you drop or scratch the bulb.
Page 460 A. Low-Beam Headlamp B. High-Beam Headlamp 2. Pull the headlamp assembly out. If your vehicle has one pin on the headlamp 3. Unplug the electrical connector. assembly, remove the pin. To remove the pin, turn the pin up and pull it out straight out. 4.
Page 461: Front Turn Signal, Sidemarker And Daytime Running Lamps
Front Turn Signal, Sidemarker and 2. Press the retainer clip, located behind the turn signal housing, towards the outside of the vehicle. Daytime Running Lamps 3. Pull the turn signal housing out from the vehicle. 4. Press the locking release lever, turn the bulb socket counterclockwise and remove the socket from the turn signal housing.
Page 462: Roof Marker Lamps
Roof Marker Lamps 1. Remove the two screws and lift off the lens. 2. Remove the six screws on the center roof marker lamps. 3. Turn the old bulb counterclockwise to remove it from the socket. 5-66...
Page 463 4. Put a new bulb into the socket and turn clockwise until it locks in place. 5. Reinstall the lens and tighten the screws. 5-67...
Page 464 Center High-Mounted Stoplamp (CHMSL) and Cargo Lamp A. Cargo Lamps 1. Remove the screws and lift off the lamp assembly. B. Center High-Mounted Stoplamps 2. Remove the CHMSL bulb holder back plate from the housing by pressing the release tabs. 3.
Page 465: Pickup Box Identiﬁcation And Fender Marker Lamps
Pickup Box Identiﬁcation and Fender Marker Lamps 1. Remove the screws and lamp assembly. 2. Unplug the lamp assembly harness. 3. Gently pry the individual lamp from the lamp housing. 4. Unplug the lamp. 5. Plug in a new lamp and snap it into the housing. 6.
Page 466: Taillamps
Taillamps Your vehicle may have one of the following taillamp assemblies: 1. Open the tailgate. A. Stoplamp 2. Remove the two rear B. Turn Signal lamp assembly screws near the tailgate C. Back-up Lamp latch and pull out the lamp assembly. A.
Page 467 3. Press the release tab, if equipped, and turn the bulb socket counterclockwise to remove it from the taillamp housing. 4. Pull the old bulb straight out from the socket. 5. Press a new bulb into the socket and turn the socket clockwise into the taillamp housing.
Page 468: Replacement Bulbs
Taillamps (Chassis Cab Models) Replacement Bulbs A. Turn Signal Lamp B. Stoplamp Exterior Lamp Bulb Number C. Back-up Lamp Low-Beam Headlamps 9006 High-Beam Headlamps 9005 Daytime Running Lamps (DRL) 4114K Front Roof Marker Lamps Front Parking and Turn Lamp 3457A Rear Marker Lamp, Taillamp and 3157 Stop Lamp**...
Page 469: Windshield Wiper Blade Replacement
Windshield Wiper Blade Replacement Windshield wiper blades should be inspected at least twice a year for wear and cracking. See Scheduled Maintenance on page 6-4 for more information. Replacement blades come in different types and are removed in different ways. For proper type and length, see Normal Maintenance Replacement Parts on page 6-16.
Page 470: Tires
Tires CAUTION: (Continued) Your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever have questions • Overinﬂated tires are more likely to be about your tire warranty and where to obtain service, cut, punctured or broken by a sudden see your GM Warranty booklet for details.
Page 471 (A) Tire Size Code: The tire size code is a combination of letters and numbers used to deﬁne a particular tire’s width, height, aspect ratio, construction type and service description. See the “Tire Size Code” illustration later in this section for more detail. (B) TPC Spec (Tire Performance Criteria Speciﬁcation): Original equipment tires designed to GM’s speciﬁc tire performance criteria have a TPC...
Page 472 (D) Tire Identiﬁcation Number (TIN): The letters and numbers following DOT code are the Tire Identiﬁcation Number (TIN). The TIN shows the manufacturer and plant code, tire size, and date the tire was manufactured. The TIN is molded onto both sides of the tire, although only one side may have the date of manufacture.
Page 473: Tire Size
(A) Tire Size: The tire size code is a combination of (F) Tire Ply Material: The type of cord and number of letters and numbers used to deﬁne a particular plies in the sidewall and under the tread. tire’s width, height, aspect ratio, construction type and (G) Single Tire Maximum Load: Maximum load that service description.
Page 474 (A) Passenger (P-Metric) Tire: The United States version of a metric tire sizing system. The letter P as the ﬁrst character in the tire size means a passenger vehicle tire engineered to standards set by the U.S. Tire and Rim Association. (B) Tire Width: The three-digit number indicates the tire section width in millimeters from sidewall to sidewall.
Page 475: Tire Terminology And Deﬁnitions
(D) Construction Code: A letter code is used to Belt: A rubber coated layer of cords that is located indicate the type of ply construction in the tire. The letter between the plies and the tread. Cords may be made R means radial ply construction;...
Page 476 GVWR: Gross Vehicle Weight Rating, see Loading Maximum Loaded Vehicle Weight: The sum of curb Your Vehicle on page 4-56. weight; accessory weight; vehicle capacity weight; and production options weight. GAWR FRT: Gross Axle Weight Rating for the front axle, see Loading Your Vehicle on page 4-56. Normal Occupant Weight: The number of occupants a vehicle is designed to seat multiplied by 150 pounds GAWR RR: Gross Axle Weight Rating for the rear axle,...
Page 477 Rim: A metal support for a tire and upon which the tire UTQGS: Uniform Tire Quality Grading Standards, a tire beads are seated. information system that provides consumers with ratings for a tire’s traction, temperature and treadwear. Sidewall: The portion of a tire between the tread and Ratings are determined by tire manufacturers using the bead.
Page 478: Inﬂation - Tire Pressure
Inﬂation - Tire Pressure When to Check Check your tires once a month or more. The tire and loading information label, shows the correct inﬂation pressures for your tires when they’re cold. Also, check the tire pressure of the spare tire. “Cold”...
Page 479: Dual Tire Operation
Dual Tire Operation Tire Inspection and Rotation When the vehicle is new, or whenever a wheel, wheel Tires should be rotated every 5,000 to 8,000 miles bolt or wheel nut is replaced, check the wheel nut torque (8 000 to 13 000 km). after 100, 1,000 and 6,000 miles (160, 1 600 and Any time you notice unusual wear, rotate your tires as 10 000 km) of driving.
Page 480 If your vehicle has single rear wheels and the tread If your vehicle has dual rear wheels and the tread design for your front tires is the same as your rear tires, design for your front tires is the same as your rear tires, use the rotation pattern shown here when rotating always use one of the correct rotation patterns shown your tires.
Page 481 Make certain that all wheel nuts are properly tightened. See “Wheel Nut Torque” under Capacities and Speciﬁcations on page 5-132. CAUTION: Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after a time.
Page 482: When It Is Time For New Tires
When It Is Time for New Tires Buying New Tires To ﬁnd out what kind and size of tires you need, look at One way to tell when it’s the Certiﬁcation/Tire label or the Tire and Loading time for new tires is to Information label.
Page 483 CAUTION: CAUTION: Mixing tires could cause you to lose control If you use bias-ply tires on your vehicle, the while driving. If you mix tires of different sizes wheel rim ﬂanges could develop cracks after or types (radial and bias-belted tires), the many miles of driving.
Page 484: Uniform Tire Quality Grading
Uniform Tire Quality Grading Treadwear The treadwear grade is a comparative rating based on Quality grades can be found where applicable on the the wear rate of the tire when tested under controlled tire sidewall between tread shoulder and maximum conditions on a speciﬁed government test course.
Page 485: Wheel Alignment And Tire Balance
Temperature – A, B, C Wheel Alignment and Tire Balance The temperature grades are A (the highest), B, and C, The wheels on your vehicle were aligned and balanced representing the tire’s resistance to the generation carefully at the factory to give you the longest tire life of heat and its ability to dissipate heat when tested and best overall performance.
Page 486 Your dealer will know the kind of wheel you need. Notice: The wrong wheel can also cause problems with bearing life, brake cooling, speedometer or Each new wheel should have the same load-carrying odometer calibration, headlamp aim, bumper height, capacity, diameter, width, offset and be mounted vehicle ground clearance and tire or tire chain the same way as the one it replaces.
Page 487: Tire Chains
Tire Chains CAUTION: (Continued) CAUTION: instructions. To help avoid damage to your vehicle, drive slowly, readjust or remove the device if it’s contacting your vehicle, and don’t If your vehicle has dual wheels or P265/75R16, spin your wheels. LT265/75R16, P265/70R17 or P275/55R20 size If you do ﬁnd traction devices that will ﬁt, tires, don’t use tire chains.
Page 488: If A Tire Goes Flat
If a Tire Goes Flat CAUTION: It’s unusual for a tire to “blowout” while you’re driving, especially if you maintain your tires properly. If air goes out of a tire, it’s much more likely to leak out slowly. Lifting a vehicle and getting under it to do But if you should ever have a “blowout,”...
Page 489: Changing A Flat Tire
Changing a Flat Tire CAUTION: (Continued) If a tire goes ﬂat, avoid further tire and wheel damage by driving slowly to a level place. Turn on your 5. Put the wheel blocks at the front and rear hazard warning ﬂashers. of the tire farthest away from the one being changed.
Page 490: Removing The Spare Tire And Tools
Removing the Spare Tire and Tools ® Extended Cab Regular Cab and Crew Cab 5-94...
Page 491 2. To release the bottle jack from its holder, turn the knob on the bottle jack counterclockwise to lower the jack head. 3. The wheel blocks and the wheel block retainer can be removed by turning the wing nut counterclockwise. 4.
Page 492 1. If your vehicle is equipped with a hoist lock (J), open the spare tire lock cover on the bumper and use the ignition key to remove the lock. 2. Assemble the wheel wrench (H) and the two jack handle extensions (I) as shown. A.
Page 493 3. Insert the hoist end 5. The wheel wrench has (open end) (F) of the a hook that allows you extension through to pull the hoist the hole (G) in the cable towards you to rear bumper. assist in reaching the spare tire.
Page 494: Removing The Flat Tire And Installing The Spare Tire
Removing the Flat Tire and Installing 1. If your vehicle has wheel nut caps, loosen the Spare Tire them by turning the wheel wrench Use the following pictures and instructions to remove counterclockwise. the ﬂat tire and raise the vehicle. If the vehicle has a center cap with wheel nut caps, the wheel nut caps are designed to stay with the center cap after they are loosened.
Page 495 If the wheel has a smooth center cap, place the 2. Use the wheel wrench to loosen all the wheel nuts. chisel end of the wheel wrench in the slot on Turn the wheel wrench counterclockwise to loosen the wheel, and gently pry out. the wheel nuts.
Page 496 If you have added a snow plow to the front of your vehicle, lower the snow plow fully before raising the vehicle. CAUTION: Getting under a vehicle when it is jacked up is dangerous. If the vehicle slips off the jack you could be badly injured or killed.
Page 497 Front Position All Other Models Front Position 2WD 1500 Series 5-101...
Page 498 5. Remove all the wheel nuts and take off the ﬂat tire. 6. Remove any rust or dirt from the wheel bolts, mounting surfaces Rear Position and spare wheel. 4. Make sure the jack head is positioned so that the rear axle is resting securely between the grooves that are on the jack head.
Page 499 7. After mounting the spare, put the wheel CAUTION: nuts back on with the rounded end of the nuts toward the wheel. Rust or dirt on the wheel, or on the parts to Tighten each wheel nut which it is fastened, can make the wheel nuts by hand.
Page 500 Rear Position Front Position 2WD 1500 Series 8. Turn the wheel wrench counterclockwise to lower the vehicle. Lower the jack completely. 5-104...
Page 501 CAUTION: (Continued) Stop somewhere as soon as you can and have the nuts tightened with a torque wrench to the proper torque speciﬁcation. See Capacities and Speciﬁcations on page 5-132 for wheel nut torque speciﬁcation. Notice: Improperly tightened wheel nuts can lead 9.
Page 502: Storing A Flat Or Spare Tire, Jack And Tools
Storing a Flat or Spare Tire, Jack and Tools CAUTION: Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place.
Page 503 To store the jack and jack tools do the following: 1. Put the jack tools and gloves in the tool bag and place in the retaining bracket. Tighten down the wing nut. 2. Assemble the wheel blocks and bottle jack together with the wing nut and retaining hook.
Page 504 1. Put the tire on the ground at the rear of the vehicle with the valve stem pointed down, and to the rear. 2. Tilt the retainer (D) downward and through the wheel opening. Make sure the retainer is fully seated across the underside of the wheel.
Page 505 4. Insert the hoist end (F) through the hole (G) in the rear bumper and into the hoist shaft. 5. Raise the tire part way upward. Make sure the retainer is seated in the wheel opening. 6. Raise the tire fully against the underside of the vehicle by turning the wheel wrench clockwise A.
Page 506: Secondary Latch System
Secondary Latch System To release the spare tire from the secondary latch do the following: Your vehicle has an underbody mounted tire hoist assembly equipped with a secondary latch system. It’s designed to stop the spare tire from suddenly falling off your vehicle.
Page 507 4. Repeat this procedure at least two times. If the spare tire lowers to the ground, continue with Step 5 of “Removing the Spare Tire and Tools” earlier in this section. 5. Turn the wrench counterclockwise until approximately six inches (15 cm) of cable is exposed.
Page 508 11. Lower the jack by turning the wheel wrench counterclockwise. Keep lowering the jack until the spare tire slides off the jack or is hanging by the cable. CAUTION: Someone standing too close during the procedure could be injured by the jack. If the spare tire does not slide off the jack completely, make sure no one is behind you or on either side of you as you pull the jack out...
Page 509: Spare Tire
13. Tilt the retainer (D) at Spare Tire the end of the cable and pull it through Your vehicle, when new, had a fully inﬂated spare tire. the wheel opening. Pull A spare tire may lose air over time, so check its the tire out from inﬂation pressure regularly.
Page 510: Appearance Care
Appearance Care Do not use any of these products unless this manual says you can. In many uses, these will damage the vehicle: Cleaning products can be hazardous. Some are toxic. Other cleaning products can burst into ﬂames if a match •...
Page 511: Special Fabric Cleaning Problems
Here are some cleaning tips: Special Fabric Cleaning Problems • Always read the instructions on the cleaner label. Stains caused by such things as catsup, coffee (black), • Clean up stains as soon as you can — before egg, fruit, fruit juice, milk, soft drinks, vomit, urine they set.
Page 512: Cleaning Vinyl
Cleaning Vinyl Cleaning the Top of the Instrument Panel Use warm water and a clean cloth. • Rub with a clean, damp cloth to remove dirt. Use only mild soap and water to clean the top surfaces of the instrument panel. Sprays containing silicones You may have to do this more than once.
Page 513: Care Of Safety Belts
Care of Safety Belts Cleaning the Outside of Your Vehicle Keep belts clean and dry. The paint ﬁnish on your vehicle provides beauty, depth of color, gloss retention and durability. CAUTION: Washing Your Vehicle Do not bleach or dye safety belts. If you do, it The best way to preserve your vehicle’s ﬁnish is to keep it may severely weaken them.
Page 514: Cleaning Exterior Lamps/Lenses
Cleaning Exterior Lamps/Lenses Foreign materials such as calcium chloride and other salts, ice melting agents, road oil and tar, tree sap, bird Use only lukewarm or cold water, a soft cloth and a car droppings, chemicals from industrial chimneys, etc., washing soap to clean exterior lamps and lenses.
Page 515: Cleaning The Windshield And Wiper Blades
Cleaning the Windshield and The surface of these wheels is similar to the painted surface of your vehicle. Don’t use strong soaps, Wiper Blades chemicals, abrasive polishes, abrasive cleaners, cleaners with acid, or abrasive cleaning brushes on If the windshield is not clear after using the windshield them because you could damage the surface.
Page 516: Sheet Metal Damage
Sheet Metal Damage At least every spring, ﬂush these materials from the underbody with plain water. Clean any areas where mud and debris can collect. Dirt packed in close areas of If the vehicle is damaged and requires sheet metal the frame should be loosened before being ﬂushed.
Page 517: Vehicle Care/Appearance Materials
Vehicle Care/Appearance Materials Description Usage Removes swirl marks, ﬁne See your GM dealer for more information on purchasing Swirl Remover Polish scratches, and other light the following products. surface contamination. Removes light scratches Cleaner Wax and protects ﬁnish. Description Usage Cleans, shines, and Polishing Cloth Interior and exterior...
Page 518: Vehicle Identiﬁcation
Vehicle Identiﬁcation Engine Identiﬁcation The 8th character in your VIN is the engine code. This code will help you identify your engine, speciﬁcations Vehicle Identiﬁcation Number (VIN) and replacement parts. Service Parts Identiﬁcation Label You’ll ﬁnd this label located in the glove box. It’s very helpful if you ever need to order parts.
Page 519: Electrical System
Electrical System Power Windows and Other Power Options Add-On Electrical Equipment Circuit breakers protect the power windows and other power accessories. When the current load is too heavy, Notice: Don’t add anything electrical to your vehicle the circuit breaker opens and closes, protecting the unless you check with your dealer ﬁrst.
Page 520: Instrument Panel Fuse Block
Instrument Panel Fuse Block The fuse block access door is on the driver’s side edge of the instrument panel. Pull off the cover to access the fuse block. To remove fuses, hold the end of the fuse between your thumb and index ﬁnger and pull straight out. You may have spare fuses located behind the fuse Fuses Usage...
Page 521 Fuses Usage Fuses Usage IGN 3 Ignition, Heated Seats Left Turn Signals LT TRN and Sidemarkers Four-Wheel Drive System, Auxiliary Battery Vehicle Stoplamps, Brake VEH STOP Module, Electronic Throttle HTR A/C Climate Control System Control Module Power Door Lock Relay LOCK (Relay) RT TRLR ST/TRN Right Turn Signal/Stop Trailer...
Page 522: Center Instrument Panel Fuse Block
Center Instrument Panel Fuse Block Device Usage BODY Body Wiring Connector The center instrument panel utility block is located DEFOG Rear Defogger Relay underneath the instrument panel, to the left of the steering column. HDLNR 1 Headliner Wiring Connector 1 SPARE RELAY Not Used Driver and Passenger Seat...
Page 523 Underhood Fuse Block The underhood fuse block in the engine compartment on the driver’s side of the vehicle near the battery. Lift the cover for access to the fuse/relay block. To remove fuses hold the end of the fuse between your thumb and index ﬁnger and pull straight out.
Page 524 5-128...
Page 525 *1 — Gasoline Engine and Diesel Engine. Fuses Usage *2 — Gasoline Engine; ECMRPV — Diesel Engine. Accessory Power/Trailer STUD 2 Wiring Brake Feed *3 — Gasoline Engine; FUEL HT — Diesel Engine. Anti-Lock Brakes *4 — Gasoline Engine; ECM I — Diesel Engine. VSES/ECAS Vehicle Stability *5 —...
Page 526 Fuses Usage Fuses Usage Vent Solenoid HDLP-HI Headlamp High Beam Relay Canister/Quadrasteer PRIME Not Used Module Power Oxygen Sensors RR HVAC Not Used Supplemental Inﬂatable Auxiliary Power Restraint System AUX PWR Outlet — Console Front Parking Lamps, FRT PARK IGN 1 Ignition Relay Sidemarker Lamps PCM 1...
Page 527 Fuses Usage Fuses Usage Air Conditioning Compressor HORN Horn Relay A/C COMP Relay Windshield Washer W/S WASH RR WPR Not Used Pump Relay RADIO Audio System W/S WASH Windshield Washer Pump Mid Bussed Electrical Center, OnStar/Rear Seat INFO SEO B1 Rear Heated Seats, Entertainment HomeLink...
Page 528: Capacities And Speciﬁcations
Capacities and Speciﬁcations Please refer to Recommended Fluids and Lubricants on page 6-13 for more information. All capacities are approximate. When adding see the refrigerant charge label under the hood for charge capacity information and requirements. Capacities and Speciﬁcations Engine VIN Code Spark Plug Gap VORTEC™...
Page 529 Capacities Capacities Application English Metric Cooling System After reﬁll, the level must be rechecked. See “Cooling System” in the Index. VORTEC™ 4300 V6 Automatic Transmission 15.0 quarts 14.0 L VORTEC™ 4300 V6 Manual Transmission 15.0 quarts 14.0 L VORTEC™ 4800 V8 Automatic Transmission 15.0 quarts 14.0 L VORTEC™...
Page 530 Capacities (cont’d) Capacities Application English Metric Engine Oil With Filter After reﬁll, the level must be rechecked. Add enough engine oil so that the ﬂuid is within the proper operating range. See Engine Oil on page 5-20. VORTEC™ 4300 V6 (Vin W) 4.5 quarts 4.3 L VORTEC™...
Page 531 Capacities (cont’d) Capacities Application English Metric Chassis Cab 3500 27.0 gallons 102 L (front) Chassis Cab 3500 (California) 27.0 gallons 102 L (front) 27.0 gallons 102 L (front) Chassis Cab 3500HD 23.0 gallons 87 L (rear) Chassis Cab 3500HD 27.0 gallons 102 L (front) Air Conditioning Refrigerant Capacity Air Conditioning Refrigerant R-134a...
Page 532 NOTES 5-136...
Page 533 Section 6 Maintenance Schedule Maintenance Schedule ........6-2 At the First 100, 1,000 and 6,000 Miles Introduction ...........6-2 (160, 1 600 and 10 000km) ......6-10 Maintenance Requirements ......6-2 At Each Fuel Fill ..........6-10 Your Vehicle and the Environment ....6-2 At Least Once a Month .........6-10 Using Your Maintenance Schedule ....6-3 At Least Once a Year ........6-11 Scheduled Maintenance ........6-4...
Page 534: Maintenance Schedule
Maintenance Schedule Maintenance Requirements Notice: Maintenance intervals, checks, inspections, Introduction replacement parts and recommended ﬂuids and lubricants as prescribed in this manual are Important: Keep engine oil at the proper level and necessary to keep your vehicle in good working change as recommended.
Page 535: Using Your Maintenance Schedule
Using Your Maintenance Schedule The services in Scheduled Maintenance on page 6-4 should be performed when indicated. See Additional Required Services on page 6-6 and Maintenance We at General Motors want to help you keep your Footnotes on page 6-8 for further information. vehicle in good working condition.
Page 536: Scheduled Maintenance
Owner Checks and Services on page 6-9 tells you what If the engine oil life system is ever reset accidentally, should be checked, when to check it and what you must service your vehicle within 3,000 miles you can easily do to help keep your vehicle in (5 000 km) since your last service.
Page 537 Scheduled Maintenance Service Maintenance I Maintenance II Change engine oil and ﬁlter. Reset oil life system. See Engine Oil on • • page 5-20. An Emission Control Service. Allison transmission only: Replace external control-main ﬁlter only at the ﬁrst maintenance service performed on the vehicle. •...
Page 538: Additional Required Services
Additional Required Services The following services should be performed at the ﬁrst maintenance service (I or II) after the indicated miles (kilometers) shown for each item. Additional Required Services 25,000 50,000 75,000 100,000 125,000 150,000 Service and Miles (Kilometers) (41 500) (83 000) (125 000) (166 000)
Page 539 Additional Required Services (cont’d) 25,000 50,000 75,000 100,000 125,000 150,000 Service and Miles (Kilometers) (41 500) (83 000) (125 000) (166 000) (207 500) (240 000) Except Allison: Change automatic • • • transmission ﬂuid and ﬁlter (severe service). See footnote (h). Except Allison: Change automatic •...
Page 540: Maintenance Footnotes
Maintenance Footnotes (c) Visually inspect hoses and have them replaced if they are cracked, swollen or deteriorated. Inspect all pipes, ﬁttings and clamps; replace with genuine GM parts † The U.S. Environmental Protection Agency or the as needed. To help ensure proper operation, a pressure California Air Resources Board has determined that the test of the cooling system and pressure cap and cleaning failure to perform this maintenance item will not nullify...
Page 541: Owner Checks And Services
(g) Add ﬂuid as needed. A ﬂuid loss could indicate a (l) Change clutch ﬂuid (or every 24 months, whichever problem; repair as needed. Check vent hose at transfer occurs ﬁrst). case for kinks and proper installation. (m) Change automatic transmission ﬂuid and ﬁlter if (h) Change automatic transmission ﬂuid and ﬁlter if the the vehicle is mainly driven under one or more of vehicle GVWR is over 8600 lbs.
Page 542: At Each Fuel Fill
At the First 100, 1,000 and 6,000 Engine Coolant Level Check Miles (160, 1 600 and 10 000km) Check the engine coolant level and add ® DEX-COOL coolant mixture if necessary. See Engine Check dual wheel nut torque. For proper torque, see Coolant on page 5-35 for further details.
Page 543: At Least Once A Year
At Least Once a Year Automatic Transmission Shift Lock Control System Check Starter Switch Check CAUTION: CAUTION: When you are doing this inspection, the When you are doing this inspection, the vehicle could move suddenly. If the vehicle vehicle could move suddenly. If the vehicle moves, you or others could be injured.
Page 544 Ignition Transmission Lock Check Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the While parked, and with the parking brake set, try to turn parking brake. the ignition key to LOCK in each shift lever position. •...
Page 545: Recommended Fluids And Lubricants
Recommended Fluids and Usage Fluid/Lubricant Lubricants Hydraulic Delco Supreme 11 Brake Fluid or Brake System equivalent DOT-3 brake ﬂuid. Fluids and lubricants identiﬁed below by name, Windshield part number or speciﬁcation may be obtained from ® Washer Solvent GM Optikleen Washer Solvent.
Page 546 Usage Fluid/Lubricant Usage Fluid/Lubricant Manual Front Axle SAE 80W-90 Axle Lubricant Transmission (Four-Wheel (GM Part No. U.S. 1052271, in Synchromesh Transmission Fluid (5–Speed Drive) Canada 10950849). (GM Part No. U.S. 12345349, in without Low Canada 10953465). SAE 75W-90 Synthetic Axle Gear, Front Axle Lubricant (GM Part No.
Page 547 Usage Fluid/Lubricant Usage Fluid/Lubricant Transfer Case Body Door ® DEXRON -III Automatic (All-Wheel Hinge Pins, Transmission Fluid. Drive) Tailgate Hinge Multi-Purpose Lubricant, Superlube and Linkage, (GM Part No. U.S. 12346241, in Front Axle Folding Seats Canada 10953474). Propshaft and Fuel Spline or Spline Lubricant, Special Lubricant Door Hinge...
Page 548: Normal Maintenance Replacement Parts
Normal Maintenance Replacement Parts Replacement parts identiﬁed below by name, part number, or speciﬁcation can be obtained from your dealer. VIN Code Oil Filter 25010792**/PF47* 25010633**/PF44* 25010633**/PF44* Engine Air Cleaner/Filter 25313348**/A1519C*† 25313348**/A1519C*† 25313348**/A1519C*† PCV Valve 6487532**/CV769C* — — 25162556** 12571164** 12571164** Spark Plugs /41–932*...
Page 549 VIN Code Oil Filter 25010633**/PF44* 25010633**/PF44* 89028862**/PF454* 25313349** 25313349** 25313349** Engine Air Cleaner /Filter A1518C* A1518C* A1518C* PCV Valve — — — Spark Plugs 12571164**/41–985* 12571164**/41–985* 12578277**/41–983* Wiper Blades 15153642** 15153642** 15153642** Wiper Blade Type ITTA ITTA ITTA 22 inches 22 inches 22 inches Wiper Blade Length...
Page 550: Engine Drive Belt Routing
Engine Drive Belt Routing V6 Engines V8 Engines 6-18...
Page 551: Maintenance Record
Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service and the type of services performed in the boxes provided. See Maintenance Requirements on page 6-2 in this section. Any additional information from Owner Checks and Services on page 6-9 can be added on the following record pages.
Page 552 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II 6-20...
Page 553 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II 6-21...
Page 554 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II 6-22...
Page 555 Section 7 Customer Assistance and Information Customer Assistance and Information ....7-2 Reporting Safety Defects ........7-10 Customer Satisfaction Procedure ......7-2 Reporting Safety Defects to the Online Owner Center ........7-3 United States Government ......7-10 Customer Assistance for Text Reporting Safety Defects to the Telephone (TTY) Users ........7-4 Canadian Government ........7-11 Customer Assistance Offices ......7-4...
Page 556: Customer Assistance And Information
Your satisfaction and goodwill are important to the windshield.) your dealer and to Chevrolet. Normally, any concerns with the sales transaction or the operation of your • Dealership name and location vehicle will be resolved by your dealer’s sales or service...
Page 557: Online Owner Center
The BBB Auto Line Program is an out of court program Online Owner Center administered by the Council of Better Business Bureaus to settle automotive disputes regarding vehicle The Owner Center is a resource for your GM ownership repairs or the interpretation of the New Vehicle needs.
Page 558: Customer Assistance For Text Telephone (Tty) Users
Chevrolet encourages customers to call the toll-free Fax Number: 313-381-0022 number for assistance. If a U.S. customer wishes From U.S. Virgin Islands: to write to Chevrolet, the letter should be addressed to 1-800-496-9994 Chevrolet’s Customer Assistance Center. Fax Number: 313-381-0022...
Page 559: Gm Mobility Program For Persons
Canada – Customer Assistance GM Mobility Program for Persons with Disabilities General Motors of Canada Limited Customer Communication Centre, 163-005 1908 Colonel Sam Drive This program, available to Oshawa, Ontario L1H 8P7 qualiﬁed applicants, can 1-800-263-3777 (English) reimburse you up to $1,000 1-800-263-7854 (French) toward eligible aftermarket 1-800-263-3830 (For Text Telephone devices (TTYs))
Page 560: Roadside Assistance Program
1-800-CHEV-USA (243-8872) • Flat Tire Change: Installation of a spare tire will be As the proud owner of a new Chevrolet vehicle, you are covered at no charge. (The customer is responsible automatically enrolled in the Chevrolet Roadside for the repair or replacement of the tire if not Assistance program.
Page 561: Canadian Roadside Assistance
By scheduling a service appointment and advising coverage provided by the New Vehicle Limited Warranty. your service consultant of your transportation needs, Chevrolet reserves the right to make any changes or your dealer can help minimize your inconvenience. discontinue the Roadside Assistance program at...
Page 562: Transportation Options
Warranty service can generally be completed while you Courtesy Rental Vehicle wait. However, if you are unable to wait, Chevrolet helps minimize your inconvenience by providing several Your dealer may arrange to provide you with a courtesy transportation options.
Page 563: Vehicle Data Collection And Event Data Recorders
Additional Program Information Vehicle Data Collection and Event Data Recorders Courtesy Transportation is available during the Bumper-to-Bumper warranty coverage period, but it is Your vehicle, like other modern motor vehicles, has a not part of the New Vehicle Limited Warranty. A number of sophisticated computer systems that monitor separate booklet entitled “Warranty and Owner and control several aspects of the vehicle’s...
Page 564: Reporting Safety Defects
To read this information, special equipment is needed Reporting Safety Defects and access to the vehicle or the SDM is required. GM will not access information about a crash event or Reporting Safety Defects to the share it with others other than •...
Page 565: Reporting Safety Defects To The Canadian Government
Transmission, Transaxle, Transfer Please call us at 1-800-222-1020, or write: Case Unit Repair Manual Chevrolet Motor Division Chevrolet Customer Assistance Center This manual provides information on unit repair P.O. Box 33170 service procedures, adjustments, and speciﬁcations Detroit, MI 48232-5170 for GM transmissions, transaxles, and transfer cases.
Page 566: Service Bulletins
Service Bulletins Current and Past Model Order Forms Service Bulletins give technical service information Service Publications are available for current and needed to knowledgeably service General Motors cars past model GM vehicles. To request an order form, and trucks. Each bulletin contains instructions to please specify year and model name of the vehicle.
Page 567 All-Wheel Drive ..........5-58 All-Wheel Drive (AWD) System ......2-48 Accessory Power Outlets ......... 3-19 AM ............. 3-128 Adding a Snow Plow or Similar Equipment ..4-63 AM-FM Radio ..........3-73 Adding Washer Fluid ........5-48 Antenna, Fixed Mast ........3-130 Additional Program Information ......
Page 568 Audio System(s) (cont.) Before Leaving on a Long Trip ......4-42 Radio with Cassette and CD ......3-86 Before You Drive ........... 3-114 Radio with CD ..........3-76 Before You Go Off-Roading ......4-23 Radio with Six-Disc CD ......3-100 Brake Rear Seat Audio (RSA) .......
Page 569 CHECK WASHER FLUID ......... 3-65 Checking Brake Fluid ........5-50 California Fuel ..........5-6 Checking Coolant ..........5-36 Canada – Customer Assistance ......7-5 Checking Engine Oil ........5-20 Canadian Owners ..........ii Checking Things Under the Hood ...... 5-12 Canadian Roadside Assistance ......
Page 570 Chime Level Adjustment ......... 3-130 Control of a Vehicle .......... 4-5 Cigarette Lighter ..........3-20 Coolant Cleaning Engine Temperature Gage ......3-46 Inside of Your Vehicle ......... 5-114 Heater, Engine ..........2-26 Outside of Your Vehicle ......5-117 Surge Tank Pressure Cap ......5-38 Underbody Maintenance ......
Page 571 Driving (cont.) Drunken ............4-2 Daytime Running Lamps ........3-15 Freeway ............. 4-41 Defensive Driving ..........4-2 Hill and Mountain Roads ......4-44 Defogging and Defrosting ......3-23, 3-31 In Rain and on Wet Roads ......4-37 Delayed Locking ..........2-10 Off-Road ............
Page 572 Entry Lighting ..........3-18 Environmental Concerns ........4-25 Easy Exit Seat ..........2-72 Event Data Recorders (EDR) ......7-9 Electrical System Exit Lighting ........... 3-18 Add-On Equipment ........5-123 Express Down Windows ........2-18 Fuses and Circuit Breakers ......5-123 Extended Cab ........
Page 573 Fluid Fuel Information Button ........3-56 Automatic Transmission ......5-27, 5-30 FUEL LEVEL LOW ......... 3-66 Manual Transmission ........5-33 Fuses Power Steering ........... 5-46 Fuses and Circuit Breakers ......5-123 Windshield Washer ........5-47 Windshield Wiper ........5-123 FM Stereo ............ 3-128 Fog Lamps ............
Page 574 How to Check and Add Fluid ......5-35 How to Check Lubricant ........5-59 Hazard Warning Flashers ........3-6 How to Check Power Steering Fluid ....5-47 Head Restraints ..........1-8 How to Use This Manual ........ii Headlamp High/Low-Beam Changer ....3-8 How to Wear Safety Belts Properly ....
Page 575 Light Air Bag Off ..........3-37 Jump Starting ..........5-53 Air Bag Readiness ........3-36 Anti-Lock Brake System Warning ....3-44 Battery Warning .......... 3-42 Brake System Warning ......... 3-43 Cruise Control ..........3-51 Key Release Button (Manual Transmission) ..2-24 Four-Wheel-Drive .........
Page 576 Loss of Control ..........4-20 Manual Seats ........... 1-3 LOW COOLANT LEVEL ........3-67 Manual Selectable Ride ........4-11 Low Fuel Warning Light ........3-53 Manual Transfer Case ........2-37 Lumbar Manual Transmission ....... 2-25, 2-52 Power Controls ..........1-5 Fluid ............
Page 577 ® Mirrors (cont.) OnStar Virtual Advisor ........2-67 Outside Power Mirrors ........2-62 Other Warning Devices ........3-6 Outside West Coast-Type Mirrors ....2-61 Outlet Adjustment ........3-24, 3-32 Model Reference ..........vi Outside MyGMLink.com ..........7-3 Automatic Dimming Mirror ......2-64 Camper-Type Mirrors ........
Page 578 Parking Power Steering ..........4-13 Brake ............2-48 Power Winches ..........4-100 Over Things That Burn ......... 2-52 Programmable Automatic Door Locks ....2-10 Parking on Hills ..........4-93 Parking Your Vehicle ........2-52 Passenger Air Bag Indicator ..... 2-58, 2-60 Passenger Air Bag Status Indicator ....
Page 579 Radios (cont.) REDUCED ENGINE POWER ......3-67 Theft-Deterrent .......... 3-127 Regular Cab and Extended Cab Models ..... 1-73 Understanding Reception ......3-128 Remote Control ..........3-119 RANGE SHIFT INHIBITED (Allison Remote Keyless Entry System ......2-4 ® Transmission Only) ........3-67 Remote Keyless Entry System, Operation ....
Page 580 Rocking Your Vehicle To Get It Out ....4-51 Seats (cont.) Routing, Engine Drive Belt ....... 6-18 Manual ............1-3 Running Your Engine While You Are Parked ..2-53 Memory ............. 2-70 Power Lumbar ..........1-5 Power Seats ..........1-4 Rear Seat Operation ........
Page 581 Service Bulletins ..........7-12 Steering ............4-13 Service Manuals ..........7-11 Steering in Emergencies ........4-14 SERVICE RIDE CONTROL ......3-69 Steering Tips ..........4-13 Setting Preset PTYs (RDS Only) ..3-80, 3-91, 3-105 Steering Wheel Controls, Audio ....... 3-127 Setting Preset Stations ..
Page 582 Theft-Deterrent Systems ........2-20 Towing Content Theft-Deterrent ........ 2-20 Power Take-Off (PTO) ........ 4-100 ® Passlock ........... 2-22 Recreational Vehicle ........4-53 TIGHTEN FUEL CAP ........3-70 Towing a Trailer .......... 4-70 Tilt Wheel ............3-7 Your Vehicle ..........4-52 Tire Sidewall Labeling ........
Page 583 Trip Odometer ..........3-35 Vehicle Data Collection and Event Data Truck-Camper Loading Information ....4-67 Recorders ............ 7-9 Turn and Lane Change Signals ......3-8 Vehicle Identiﬁcation TURN SIGNAL ON ......... 3-72 Number (VIN) ..........5-122 Turn Signal/Multifunction Lever ......3-7 Service Parts Identiﬁcation Label ....
Page 584 Wheels Windshield Washer ......... 3-10 Alignment and Tire Balance ......5-89 Fluid ............5-47 Replacement ..........5-89 Windshield Wiper When to Add Engine Oil ........5-21 Blade Replacement ........5-73 When to Change Engine Oil (GM Oil Fuses ............5-123 Life System) ..........

Save PDF