:5
0
.6.,
7.
:8
.
I
Turn the bulb assembly to the. left to-remove it.
Put the ne-w bulb assembly into the headlamp
assembly and turn it to the right until it
is
tight.
Plug in the electrical connector.
Put the headlamp lens assembly back
into the
vehicle, Install
the
~ W O
,retaining. clips.
Two-Piece. Composite Headlamp System
1. Open the h.ood.
2. Remove the black retainer clips- by lifting up.
3.
Pull the headlamp lens .assembly out.
4. Uop1ug:the ekctrical connectox.
6-36