Advertisement
Turn Signal and Lane Change Indicator
The turn signal has two upward (for right) and
two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.
To signal a turn, move the lever all the way up or
down. When the turn is finished, the lever will
return automatically.
An
arrow on the instrument
panel will flash in the
direction of the turn
or
lane change.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.
As you signal a turn or a lane change, if the arrows don't
flash but just stay
on,
a signal bulb may be burned out
and other drivers won't see your turn signal.
If a bulb is burned out, have it replaced to help avoid
an accident. If the arrows don't go on at all when
you
signal a turn, check for burned-out bulbs and then check
the fuse (see "Fuses and Circuit Breakers" in the Index).
Headlamp High/Low Beam Changer
First, you must have the
headlamps on. For high
beams, push the turn signal
lever away from
you.
When
the high beams are on, this
light on the instrument
panel also will be on.
It
will go off when you switch to low beam. To switch
back to low beams, pull the lever toward you.
Advertisement
