Advertisement
For normal cooling, push the A/C button and move the
air intake lever to CIRCULATE for normal cooling. For
faster cooling, move the lever to RECIRCULATE.
Then move the airflow knob to VENT and turn the
temperature control knob counterclockwise. Turn the
fan knob to HI.
On days when it is raining or the humidity is high,
follow these dehumidifying steps instead of the cooling
directions. It will help clean windows that are cloudy
with moisture.
Push the A/C button. Move the air intake lever to
CIRCULATE and turn the airflow knob to DEFROST.
Turn the fan knob to HI and adjust the temperature knob
to a comfortable setting.
Heating
For the quickest results, move the
a i r
intake lever to
RECIRCULATE and the airflow knob to FLOOR.
Turn the temperature knob clockwise for warmer air and
turn the fan knob toward HI. You should switch to
CIRCULATE once in a while to avoid stale air and
cloudy windows. To prevent cold air from blowing in,
you may shut off the outer dash vents by using
the thumbwheels.
Bi-Level
You may want to use bi-level heating
on
cool, but sunny
days. This setting directs outside air toward your body
and warmer air toward your feet.
Move the air intake lever to CIRCULATE and turn the
airflow knob
to
BI-LEVEL. Turn the temperature knob
to the white area and the fan knob toward HI.
Ventilation System
For mild outside temperatures, when very little heating
is required, you can still direct outside air through
your vehicle.
Move the air intake lever to CIRCULATE and turn the
airflow knob to VENT. Turn the temperature knob to a
comfortable setting and the fan knob toward HI.
Your Geo's flow-through ventilation system supplies
outside air into the vehicle when it
is
moving. Outside
air will also enter the vehicle when the heater or the air
conditioning fan is running and the
air
intake lever is
at CIRCULATE.
3-3
Advertisement
