Chevrolet 2011 Corvette Navigation System Navigation Manual page 88

The system
goes to the preset destination
number. This preset destination
can be chosen as a waypoint or
a destination. There must be a
location stored in the preset
destination number that is chosen.
For example, first store a location
in Preset Destination 3. Say Go to
Preset Destination 3. The system
goes to Preset Destination 3 and
prompt you to choose it as a
waypoint or destination.
The system
adds the current marked point as a
waypoint. This command is used
after the following commands have
been used: Home, Go to Starting
Point, Go to Previous Destination.
The system
adds the current marked point
as the final destination. This
command is used after the following
commands have been used: Home,
Go to Starting Point, Go to Previous
Destination.
The system repeats the last
available voice prompt guidance
command if a destination has
been set.
The system increases
the volume of the navigation voice
prompts.
The system decreases
the volume of the navigation voice
prompts.
The system
turns off the navigation voice
prompts if a destination has
been set.
The system
turns on the navigation voice
prompts.
The system changes
to Arrow Guidance screen view in
the Guidance Menu if a destination
has been set.
The system changes
to Turn List Guidance screen
view in the Guidance Menu if
a destination has been set.
The system changes
to Freeway Guidance screen view in
the Guidance Menu if a destination
has been set. This command is only
available if you are on a freeway.
The system changes
to Intersection Guidance screen
view in the Guidance Menu if a
destination has been set. This
command is only available when
the next turn is less than 0.5 mile
(800 m) away for city streets and
2 miles (2 km) away for freeways.
The system
displays the entire route if a
destination has been set.