Chevrolet 2011 Corvette Navigation System Navigation Manual page 57

Waypoints are
destinations that can be added
to your route before reaching the
final destination. Waypoints can
be added before or after entering
a final destination. Waypoints that
were entered prior to setting a final
destination, will delete if a final
destination has not been entered.
Up to five points can be stored as
waypoints.
To add a waypoint:
1. Press Dest. & Way Pt. from the
STORED LOCATIONS screen.
2. Press Add from the
DEST. & WAY POINT screen.
3. Using the desired method of
entering a destination, enter the
way point. See
for more information.
A map screen appears with the
way point marked.
4. Select (Way Point) icon on
the map screen to save the way
point.
5. Repeat Steps 2 - 6 to add up
to five way points to your route.
After the first waypoint has
been saved, the ADD WAY
POINT screen appears and
the waypoint is on the screen.
The second through the fifth
waypoint does not appear on
the ADD WAY POINT screen
until the ADD button, next to
the corresponding waypoint
row, is pressed. After the ADD
button has been pressed,
the system returns to the
STORED LOCATIONS screen.
To change the order of the
waypoints:
1. Press Dest. & Way Pt. from the
STORED LOCATIONS screen.
2. Press List from the
DEST. & WAY POINT screen.
3. From the CHANGE ORDER
screen, select on the addresses,
in the order you would like
them to fall on the route.
After selecting the address
line, a number, indicating the
order, appears next to the
corresponding row.
4. Select OK to save the changes.
The system returns to the
STORED LOCATIONS screen.