Chevrolet 2011 Corvette Navigation System Navigation Manual page 21

When RDS
is on, if the current station has a
message, INFO displays. Press
INFO from the preset menu to
view the message. If the whole
message does not display, parts
of the message appears every
three seconds until the message
is completed. Once the complete
message has been displayed, INFO
disappears from the display until
another new message is received.
INFO remains available so that the
entire message an be displayed
again.
seeks stations with certain program
types. This button is used to turn
on and off Program Type (PTY)
features.
With RDS on, press RDS, followed
by PTY. The PTY display turns on.
Press RDS followed by this button
again to turn the PTY display off.
press RDS, then Select PTY.
The PTY menu appears. Use the up
and down arrows to select a PTY.
When the PTY display is on,
press
radio stations of the PTY selected.
The last PTY selected is used for
seek and scan modes. If a station
with the selected PTY is not found,
PTY only
STATION NOT FOUND displays.
If both PTY and TA are on, the
audio system searches for stations
with traffic announcements and the
selected PTY.
With RDS and PTY on,
/SEEK or SCAN to find
The six presets let you return to
your favorite PTYs. These presets
have factory PTY preset stations.
See RDS Program Type (PTY)
Selections later in this section.
Up to 12 PTYs, 6 FM1 and 6 FM2
can be set. To save a PTY preset:
1. Press FM1 or FM2.
2. Press RDS to enter the
RDS menu.
3. Press RDS ON/OFF to turn
RDS on.
4. Press PTY.
5. Press Select PTY and select the
desired PTY from the list.
6. Press and hold one of the
six presets for more than
two seconds until a beep is
heard. When you press that
numbered preset for less than
two seconds, the set PTY
returns.
7. Repeat the steps for each
preset.