Change Your Password; Saving Your Configuration; Figure 16 Change Administrator Login Password - ZyXEL Communications Dimension GS-2024 User Manual

Chapter 4 The Web Configurator
Table 5 Navigation Panel Links (continued)
LINK
ARP Table
Configure Clone

4.3.1 Change Your Password

After you log in for the first time, it is recommended you change the default administrator
password. Click Management > Access Control > Logins to display the next screen.

Figure 16 Change Administrator Login Password

4.4 Saving Your Configuration

When you are done modifying the settings in a screen, click Apply to save your changes back
to the run-time memory. Settings in the run-time memory are lost when the Switch's power is
turned off.
Click the Save link in the upper right hand corner of the web configurator to save your
configuration to nonvolatile memory. Nonvolatile memory refers to the Switch's storage that
remains even if the Switch's power is turned off.
Use the Save link when you are done with a configuration session.
50
DESCRIPTION
This link takes you to a screen where you can view the MAC address – IP address
resolution table.
This link takes you to a screen where you can copy attributes of one port to
(an)other port(s).
GS-2024 User's Guide