ZyXEL Communications ZyWall 35 Support Notes page 224

13. To define the IP source address of the Network behind FortiNet. Giving a name for your address rule,
for example "Fortinet network", and enter the IP Range/Subnet in the text box. In this example, you
should enter 192.168.1.0/24 IP Range/Subnet for the FortiNet network. Then, press OK button to save
your settings.
14. Press Create New button to edit another address rules.
14. 15. To define the IP source address of the Network behind ZyWALL. Giving a name for your address
rule, for example "ZyWALL network", and enter the IP Range/Subnet in the text box. In this
example, you should enter 192.168.2.0/24 IP Range/Subnet for the ZyWALL network. Then, press
OK button to save your settings.
16. After you finished the settings, you should see two address rules on this page.
All contents copyright (c) 2006 ZyXEL Communications Corporation.
ZyWALL 35 Support Notes
224