Page 1
Electric Fireplace Instruction Manual QBL-X36IN-BK QBL-Z50IN-BK QBL-D60IN-BK HJ-Customer-Service@outlook.com (909)637-7665 | (909)637-7593 EST 9:00AM--17:00PM...
Page 2
1. Read ALL instructions before using this unit. 2. This heater may get hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. lf provided, use handles when moving this heater. 3. Keep combustible materials, such as furniture, pillows, bedding, paper, clothes, and curtains at least 3 ft from the front of the heater and keep them away from the sides, top, and rear.
Page 3
11. DO NOT operate any heater with a damaged cord or after the heatermalfunctions, has been dropped or damaged in any manner. Please contact our after-sales service for you to solve the problem. 12. Use only for intended household use as described in this manual. Any other usenot recommended by the manufacturer may cause fire, electric shock, or injuryto persons.
Remote control ×1 ×1 ×1 Feet left Feet right Wall mount bracket Drift wood fire logs Small wall-mounted bracket Crystal embers Serial Quantity Number Model About 3pcs 2pcs QBL-X36IN-BK 300g/0.66Ib About 5pcs 2pcs QBL-Z50IN-BK 400g/0.88Ib About 6pcs 4pcs QBL-D60IN-BK 500g/1.10Ib...
Page 8
1. Digital display: timing display, flame color display, carbon bed color display, flame speed display, light brightness display, lock, “High/Low”heating setting display. 3. Press the button for 3-5S to lock or unlock.
Page 9
POWER HEATER DIMMER Press the button for 3-5S to lock or unlock. LOCK CARBON FLAME SPEED TEMP TEMP TIMER Increase the temperature.The temperature can be manually set from 59°F to 95°F. Keep pressing the button can quickly increase the temperature. SLEEP RECREATION Reduce the temperature.The temperature can be...
Page 10
In standby status, this power button light on (red color light), Other function button light off, Press this power button, the machine turns on, other function button can setting, Repress this power button again, the machine turns off stay in standby status.
Page 11
Flame color setting, each time press the flame button, the flame show different color, total 14 colors, the flame color display (F1,F2,F3,F4,F5,F6,F7,F8,F9,10,11,12,13,14), Every time you press the button, flame color LED lights will light by ( F1) yellow green, (F2) red, (F3) blue, (F4) green, (F5) purple, (F6)cyan, (F7) orange, (F8) pink, (F9) light blue, (10) light green, (11) light purple, (12) light white, (13) yellow, (14) cycle colors (Each color lasts for 3...
8.Lock setting When time use, keep press this lock button3-5S,This lock function start work, Other button can not use. If you want unlock, keep press lock button 3-5S again,then lock function will be can setting other function button. power-on mode Caution! ONLY under can you set timer-power-off function.
Recreation mode button only on the remote control. the speed is fastest and light is brightest. Press the Recreation button, this function opens, the flame and carbon bed color changes automatically; Press the Recreation button again to turn off the function and the change will stop. Installation Scheme 1 Bue to many different finish materials used on walls, it is highly recommended that you consul yourocal builder before you install this fireplace on the wall.
Page 14
QBL-X36IN-BK QBL-D60IN-BK QBL-Z50IN-BK 4.Place the unit with the front facing downward on a soft, non-abrasive surface. Install the ) on the back of the fireplace using 4pcs Self-tapping 2pcs Small wall-mounted brackets ( screws( ),as shown in the Figure. (Note: The 60-inch fireplace comes with 4 Small wall-mounted bracket ( ), which should be installed using 8 Self-tapping screws ( ).)...
Page 15
Installation Scheme 2 Free Standing Feet Assemble Way After removing the screws, the glass must be lifted up to be removed. When installing the glass, align both sides of the glass with the hooks on the fireplace, then press the glass downward to the right position.
Installation Scheme 3 Recessed Installation Due to many diferent finish materials used on walls, it is highly recommended that you consult your local builder before you install this fireplace in the wall. Select a location that is not prone to moisture and is located at least 36" away from combustible materials such as curtains, drapes, furniture, bedding.
Page 17
) on the back of the fireplace using 4pcs Self-tapping screws( as shown in the Figure. (Note: The 60-inch fireplace comes with 4 Small wall-mounted brackets ( ), which should be installed using 8 Self-tapping screws ( ).) QBL-X36IN-BK QBL-Z50IN-BK After removing the screws, QBL-D60IN-BK the glass must be lifted up to be removed.
Page 18
When installing the glass, align both sides of the glass with the hooks on the fireplace, then press the glass downward to the right position. Take out the Crystal embers ( )and the Drift wood fire logs( ), put them on ember bed. Then reinstall the glass panel to the fireplace using 2pcs Self-tapping screws( ) and the two screws saved from when the glass panel was removed.
Care, Cleaning and Maintenance Cleaning: Always turn the heater off and unplug the power cord from the outlet before cleaning. performing maintenance, or moving the fireplace. Failure to do so could result in electric shock fire, or personal injury. Never immerse in water or spray with water. Doing so could result in electric shock, fire, or personal injury.
Page 20
Technical Support (909)637-7665 | (909)637-7593 Other Info HJ-Customer-Service@outlook.com Thank you for choosing this product. We strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact us.
Need help?
Do you have a question about the QBL-X36IN-BK and is the answer not in the manual?
Questions and answers