LOWES NT28P09M Homeowners Operating Manual
  1. Manuals
  2. Brands
  3. LOWES Manuals
  4. Indoor Fireplace
  5. NT28P09M
  6. Homeowners operating manual

LOWES NT28P09M Homeowners Operating Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ELECTRIC FIREPLACE
HOMEOWNERS OPERATING MANUAL
MODEL: NT28P09M
261046
CONSUMER SAFETY INFORMATION: PLEASE READ THIS MANUAL BEFORE
INSTALLING AND OPERATING THIS APPLIANCE. FAILURE TO FOLLOW THESE
INSTRUCTIONS MAY RESULT IN A POSSIBLE ELECTRIC SHOCK, FIRE HAZARD, AND/OR
INJURY AND WILL VOID THE WARRANTY.
WARNING: IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED, AN ELECTRIC
SHOCK OR FIRE MAY RESULT IN PROPERTY DAMAGE, PERSONAL INJURY, OR LOSS OF
LIFE.
THIS INSTRUCTION BOOKLET CONTAINS
IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NT28P09M and is the answer not in the manual?

Questions and answers

Related Manuals for LOWES NT28P09M

Summary of Contents for LOWES NT28P09M

  • Page 1 ELECTRIC FIREPLACE HOMEOWNERS OPERATING MANUAL MODEL: NT28P09M 261046 CONSUMER SAFETY INFORMATION: PLEASE READ THIS MANUAL BEFORE INSTALLING AND OPERATING THIS APPLIANCE. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN A POSSIBLE ELECTRIC SHOCK, FIRE HAZARD, AND/OR INJURY AND WILL VOID THE WARRANTY.

  • Page 2: Important Instructions

    IMPORTANT INSTRUCTIONS When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and/or injury including the following: 1. Read all instructions before using this heater. 2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, etc.

  • Page 3: Package Contents

    PACKAGE CONTENTS Remote Control Screws Manual Fireplace ELECTRICAL SPECIFICATIONS Voltage: 120VAC Frequency：60Hz Watts: 1400 Watts GROUNDING INSTRUCTIONS Figure 1 This heater is for use on 120 volts. The cord has a plug as shown at (A) in figure 1. An adapter as shown at (C) is available for connecting three-blade grounding-type plugs to two-slot receptacles.
  • Page 4 Do not share a socket with other appliances when using electric fireplaces, please use a dedicated socket. × √ × Never use with an extension cord or relocatable power tap (outlet / power strip). ×...

  • Page 5: Installation Instruction

    INSTALLATION INSTRUCTION The fireplace comes with a standard 6-ft. (1.8m) 3-wire cord exiting from the right of the fireplace. Plan the installation of your fireplace to avoid the use of an extension cord, and ensure that you have clear access to a grounded electrical outlet. Prior to installing, test the fireplace to make sure the fireplace is fully operational by plugging the power supply cord into a 120 Volt grounded outlet.
  • Page 6 3. Use the supplied screws to secure the fireplace to the mantel. 4. Reinstall the glass front.
  • Page 7 OPERATING INSTRUCTION On the top-right of the electric firebox is the mechanical control panel. This panel contains the buttons to properly operate the electric fireplace. The functions of buttons on the remote control are the same as the control panel. The remote control has an effective range of up to 19 ft.. Digital Display POWER The POWER button turns the appliance on or off.
  • Page 8 TIMER The TIMER has adjustable setting at range from 1 hour to 9 hours and OFF. As shown the following: 1h-2h-3h-4h-5h-6h-7h-8h-9h-OFF. If the digital display turns on and nothing happens within 10 seconds, the digital display will auto shut off. Once you have set the timer, and the timer is up, close all the functions and enter standby mode.

  • Page 9: Battery Replacement

    BATTERY REPLACEMENT The battery compartment is located on the back end of the remote control. 1. Press and slide the battery cover open. 2. Insert two 1.5V (AAA) batteries ensuring they are installed correctly with regard to the polarities (+ and -) marked on the inside of the battery compartment. 3.

  • Page 10: Maintenance

    MAINTENANCE Clean the metal trim using a soft cloth, slightly dampened with citrus oil based product and buff with a clean soft cloth. DO NOT use brass polish or household cleaners as these products will damage the metal trim. Citrus oil based products can be obtained at supermarkets or hardware stores. The motors used on the fan and the flame generator assembly are pre-lubricated for extended bearing life and require no further lubrication.
  • Page 11 TROUBLESHOOTING Fault code Fault Cause Solution Turn the unit off and unplug it from the electrical Heater is not working outlet. Check for dirty or clogged vents. Clean the dust and debris from the vent area. Wait 5 minutes, plug in the fireplace, and then turn it back on. If the heater still doesn't work, contact customer service.

  • Page 12: Year Limited Warranty

    1 YEAR LIMITED WARRANTY Our electrical fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations. 1. This electric fireplace must be installed and operated at all times in accordance with the installation and operating instructions furnished with the product, Any unauthorized repair, alteration, willful abuse, accident, or misuse of the product shall nullify this warranty.

Table of Contents