Program Swap And Auto Program Scan - Haier 21FA12-AM Owner's Manual

Viewing TV Programs(continued)
Swap function enables quick swap to the last watched program.
Auto scan function enables automatic successive scanning of all the programs
in memory with
Program swap and a
Program swap
1 Suppose the channel number you used just
now is 8 and the channel number you are
using is 18 (as shown in the figure).
2.If you want to return to the last watched
program channel 8, you can simply press the
SWAP button.
3.If you want to return to the last watched
program channel 8, you can simply press the
SWAP button. In one word ,using the
function ,we can choose channels among the present channel and
four channels we last watched conveniently.
Auto program scan
1.If you want to select a desirable program, you
may scan all the TV programs in memory. You
can simply press the SCAN button to do this.
The programs will appear one after another
from beginning to end (each channel number
will last about 2 seconds).
2 If you want to stop the function during auto
scanning, simply press the SCAN button again.
"OFF" skip status (each channel will last about 2 seconds).
uto program scan
Program swap
Swap