Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Yokota YS-Z900
Summary of Contents for Yokota YS-Z900
- Page 1 YS-Z900 Manual www.rami-yokota.com...
-
Page 4: Before Taking Into Use
Recommended Technical specifications Brand Yokota Square Drive 3/8" Bolt capacity (mm) 8 - 10 1200 - 4800 Torque (Nm) 30 ~ 50 Weight w/o battery (kg) 1,49 mm A mm B Battery voltage (Volt) Battery type Li-ion….(Ah) Safety standard EN ISO 11148-6... - Page 5 If you intend not to use the tool for a longer period of time, it has to be oiled. Please fill some droplets of resin and acid free oil into the air inlet and let the tool run free for a couple of seconds. Do not ignore safety precautions! Safety Do not modify this tool in any way, this can cause danger for the operator.
- Page 6 Cold exhaust air should be diverted from hands and body. Air under pressure can cause injuries, be aware of this. Never direct the exhaust air to yourself or anyone else. Do not use quick change couplings direct on the air inlet of the tool as these may release during operation. Assemble at least 50 cm air hose with a hose joint of shock resistant material.
-
Page 7: Using The Tool
Make sure that the inserted/mounted tool/accessory is properly held by the retainer and make sure that the retainer is in good condition. Never use the tool without a retainer as this may cause high speed projectiles. Only use impact rated sockets when using impact or impulse wrenches. Using the tool: Before start using the tool, make sure that you are familiar with the workplace and surrounding area. -
Page 8: Maintenance
Oil replacement should only be carried out by trained qualified specialists. For Yokota Impulse wrenches the advice is to replace the oil after 250.000 cycles on hard joint, one cycle is 0,5 – 1 second impulsing. On soft joints, longer impulsing time per cycle, the oil must be changed earlier. -
Page 9: Warranty
Warranty covers material or construction mistakes of the manufacturer, which are clearly definable. Replacement of parts or repair by an official Yokota/Red Rooster service workshop is free of charge, when the tool is covered by warranty. Freight or postage is for the account of the buyer. Damage attributable to a normal wear, overloading or incorrect use is excluded from warranty. -
Page 10: Declaration Of Conformity
Capacity: 30 ~ 50 1R0054 WE, RAMI YOKOTA B.V. , hereby declare that this product is conform the Supply of Machinery (Safety) Regulaitions 2008 No. 1597, amendment 2001 No. 2157 and the standard EN ISO 11148-6 Technical file available from Rami Yokota BV:... - Page 11 www.rami-yokota.com...
Need help?
Do you have a question about the YS-Z900 and is the answer not in the manual?
Questions and answers