Advertisement
Quick Links
Advertisement
Related Manuals for Yokota YS-Z1000
Summary of Contents for Yokota YS-Z1000
- Page 1 YS-Z1000 Manual www.rami-yokota.com...
- Page 4 Recommended Technical specifications Brand Yokota Square Drive 1/2" Bolt capacity (mm) 10 ~ 12 1200 ~ 3000 Torque (Nm) 60 ~ 80 Weight w/o battery (kg) 2,04 mm A mm B Battery voltage (Volt) Battery type Li-ion….(Ah) Safety standard EN ISO 11148-6...
- Page 5 Make sure that this manual is accessible at all times for any relevant person, in case of loss of this manual ask your dealer for a new copy or refer to our website. Risk of explosion or fire: Make sure that generated sparks and/or increased temperature of the work piece can not cause any explosion or ignite a fire.
- Page 6 Do not exceed the maximum air pressure as indicated on the tool. Never carry the tool by the air hose. On overhead work, use safety helmet. Due to the process, the work piece, inserted/mounted tool/accessory may get hot causing burning injuries: Be aware of this.
- Page 7 Any person handling the tool must be able to handle the size, weight and power of the tool. Always be prepared for normal/abnormal movements/forces generated by the tool. Keep your body in balance, place your feet safe and secure. In case of interruption of the air supply, release the lever/trigger. When using a power tool, you may experience discomfort in your hands, arms, shoulders, neck and other parts of your body.
- Page 8 Oil replacement should only be carried out by trained qualified specialists. For Yokota Impulse wrenches the advice is to replace the oil after 250.000 cycles on hard joint, one cycle is 0,5 – 1 second impulsing. On soft joints, longer impulsing time per cycle, the oil must be changed earlier.
- Page 9 Impulse Wrenches Type: YS-Z1000 Capacity: WE, RAMI YOKOTA B.V. , hereby declare that this product is conform the European Directive 2006/42/EG and, the standard EN ISO 11148-6 Technical file available from Rami Yokota BV: RAMI YOKOTA BV De Ruyterkade 120...
- Page 10 www.rami-yokota.com...
Need help?
Do you have a question about the YS-Z1000 and is the answer not in the manual?
Questions and answers