Foundations Secure Sitter, 4607247, 4609247 Manual

Foundations Secure Sitter, 4607247, 4609247 Manual

Also See for Secure Sitter:

Advertisement

Foundations Secure Sitter, 4607247, 4609247 Manual

ASSEMBLY INSTRUCTIONS

RECORD PRODUCT INFORMATION FOUND ON PRODUCT HERE:
Model Number:
Manufacture Date:
PO Number:

  • Adult assembly required
  • Unpack carton, remove packaging materials, safely dispose of properly or recycle where possible.


PREVENT SERIOUS INJURY OR DEATH FROM FALLS OR SLIDING OUT. THE CHAIR SHALL BE USED ONLY FOR A CHILD CAPABLE OF SITTING UPRIGHT UNASSISTED. MAXIMUM WEIGHT OF CHILD MUST NOT EXCEED 40 LBS (18 KG). ALL OPERATING AND ASSEMBLY MUST BE PERFORMED BY AN ADULT. NEVER LEAVE CHILD UNATTENDED. ALWAYS KEEP CHILD IN VIEW WHILE IN CHAIR. CHILD SHOULD BE SECURED IN THE CHAIR AT ALL TIMES WITH THE 3 POINT HARNESS SYSTEM. ALWAYS ADJUST HARNESS PROPERLY TO THE SIZE OF THE CHILD. TRAY IS NOT DESIGNED TO HOLD CHILD SECURE IN CHAIR. NEVER LIFT OR CARRY HIGH CHAIR WITH CHILD IN IT MAKE SURE ALL FASTENERS AND PARTS ARE SECURED TIGHTLY AND CHECK THEM PERIODICALLY. DISCONTINUE USE IMMEDIATELY IF ANY PARTS ARE DAMAGED, BROKEN OR MISSING. PLACE CHAIR ONLY ON LEVEL FLAT FLOOR SURFACES AND AWAY FROM HAZARDS SUCH AS STAIRS, HEATERS, STOVES OR DRAPERY CORDS. NEVER USE CHAIR ON A TABLE. PREVENT SUFFOCATION AND DEATH: COMPLETELY REMOVE ALL PLASTIC BAGS AND PACKING MATERIALS BEFORE USING THIS PRODUCT.

TODDLER SEAT ASSEMBLY

PARTS LIST

  1. Insert the Legs into the Seat Body until you hear them click.
    TODDLER SEAT ASSEMBLY - Step 1
  2. Snap the Seat Back down into the Seat Body .
    TODDLER SEAT ASSEMBLY - Step 2
  3. Snap Crotch Restraint into bottom of Tray .
    TODDLER SEAT ASSEMBLY - Step 3
  4. Insert Tray/Restraint / into Seat Body at a slight downward angle and click into place. (remove the tray quickly & easily by pressing the triggers underneath the tray and lifting up)
    TODDLER SEAT ASSEMBLY - Step 4

HARNESS ADJUSTMENT

  1. Insert the buckle clip into the buckle housing until you here them click.
    HARNESS ADJUSTMENT - Step 1
  2. Adjust the strap to tighten or loosen to desired fit.
    HARNESS ADJUSTMENT - Step 2

CARE & MAINTENANCE

  • Store in dry area to ensure mold and corrosion do not occur. High chair should be thoroughly dried before storing.
  • Plastic parts of chair and table:
    • Hand wash with a sponge and warm soapy water.
    • Avoid using furniture polish or cleaning agents that may be hazardous to children.
  • Excessive exposure to sun could cause premature color fading of plastic.

Foundations Worldwide, Inc. • 5216 Portside Drive • Medina, OH 44256, U.S.A.
Phone: 877.716.2757 (U.S. only) or 330.722.5033 • Fax: 330.722.5037 • Foundations.com

FOR CUSTOMER SERVICE CALL 1-877-716-2757
(OUTSIDE OF U.S. 330-722-5033). DO NOT CALL RETAILER OR
RESELLER FOR SERVICE AS THEY ARE NOT AUTHORIZED TO RESOLVE ANY SERVICE ISSUES.
FOR WARRANTY AND FEDERAL SAFETY STANDARD
COMPLIANCE CERTIFICATES, PLEASE VISIT OUR WEBSITE AT:
WWW.FOUNDATIONS.COM

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Foundations Secure Sitter, 4607247, 4609247 Manual

Advertisement

Need help?

Need help?

Do you have a question about the Secure Sitter and is the answer not in the manual?

Questions and answers

Table of Contents