Download
Share
Print this page
VEVOR C30+ User Manual
  1. Manuals
  2. Brands
  3. VEVOR Manuals
  4. Binding Machine
  5. C30+
  6. User manual
VEVOR C30+ User Manual

VEVOR C30+ User Manual

Glue binder machine
Hide thumbs

Advertisement

Quick Links

Download this manual
Technical Support and E-Warranty Certificate
www.vevor.com/support
GLUE BINDER MACHINE
USER MANUAL
MODEL:C30+
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

Advertisement

loading
Need help?

Need help?

Do you have a question about the C30+ and is the answer not in the manual?

Questions and answers

Related Manuals for VEVOR C30+

Summary of Contents for VEVOR C30+

  • Page 1 Technical Support and E-Warranty Certificate www.vevor.com/support GLUE BINDER MACHINE USER MANUAL MODEL:C30+ We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Page 2 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if...

  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS WARNING: Read this material before using this product. Failure to do so can result in serious injury. Assembly precautions 1. Assemble only according to these instructions. Improper assembly can create hazards. 2. Wear safety goggles and duty work gloves during assembly. 3.
  • Page 4 OPERATING INSTRUCTIONS 1. Temperature-controlling instrument: the temperature is arranged at 338℉ at the time of exfactory (using the hot melt glue provided by our company); If hot melt glue of other style is adopted, the temperature can be adjusted according to its melting point. 2.

  • Page 5: Main Parts

    MAIN PARTS Fig.A 1. Guiding rail of the adhesive can 10. Guiding rail of paper pressing clamp 2. Cap of the adhesive can 11. Paper pressing clamp 3. Gliding handle of the adhesive can 12. Platform 4. Adhesive can 13. Handle of paper pressing clamp 5.

  • Page 6: Installation

    Fig.B (1)(5)Adjustment of the thickness of brushed adhesive (2)(6) Bolts of main bracket (3) Adjusting bolt of paper pressing position (4) Adjusting bolt of the angle of brushing adhesive surface (7) Power socket (8) Fuse INSTALLATION Please lay the machine on a steady working platform, avoiding wet place. Proper space around should be ensured for convenient operation The can cap, and the gliding handle should be installed.
  • Page 7 CAUTION: Do not push the adhesive when it is cold or the hot-melt time is not sufficient, or else it can be damaged. Keep the surroundings of the machine clean avoiding the impurity getting into the adhesive can and causing damage. Avoid touching the adhesive roller with the hard material which can damage it.
  • Page 8 turning platform and upwards. Make the cover close tightly to the positioning column. In order to put in the cover conveniently, the turning platform should be slightly lifted 3. Jog the paper block 4. Put the block between the cover and the paper pressing clamp, and make it close to the folded line.
  • Page 9 6.Press tightly the right handle down to position DN so as to press a folded line in the back cover (the cover over 160g should be made folded line manually or by creasing machine), and then turn back to position N 7.Push the right handle to position UP, the turning platform turn upwards, and draw the cover downwards slightly .
  • Page 10 9. After brushing adhesive, draw the cover lightly with the left,turn the right handle to position N then press the right handle down to position DN and keep it for 6-8seconds. 10. Loose the right handle, and lay down the handle of the paper pressing clamp.
  • Page 11 OPERATIONS FOR MAKING THE HARD COVER BOOK Preparations before the operation 1. Make the hard cover beforehand 2. Change to the hard cover pressing board Begin to operate A、 method I to make a hard cover 1.Lay down the handle of paper pressing clamp and open it, and put the hard cover between the turning platform and the paper pressing clamp.
  • Page 12 3. Put the two self-sticky inner liner head pages on the two sides of the block, put them together into the hard covers after jogging, and set them close tightly to the positioning column. 4. Lock the paper pressing clamp tightly as a way of dealing with the softcover book.
  • Page 13 6. Push the adhesive can to brush the adhesive (as brushing adhesive to the soft cover book) 7. Turn back, press down the right handle to DN and keep it slightly for about two seconds. 8.Open the paper pressing clamp, take the documents from below and close it.
  • Page 14 9. Take out the finished document and tear off the surface paper of the inner liner headpages on the two sides. Stick the headpages on the inner side of the hard cover, and brush the headpages to-and-fro until even. B、method II to make a hard cover 1.put one sheet of A3 headpage at both sides of the paper block 2.put it into the paper pressing clamp ,turn it over upwards , brush adhesive onto it (twice),and take it out when it is cooled .
  • Page 15 press grooves at both sides of the hardcover as step 8 in method I, then a fine hard cover book is well made. THE ADJUSTMENT OF THE GLUING ROLLER Step I: Adjust the parallelism of the roller and the spine Place a plastic flake with 0.8mm thickness and 320mmx60mm on the platform.

  • Page 16: Solutions Of Problems

    SOLUTIONS OF PROBLEMS The adhesive cannot be heated Reasons: 1. The power is not connected. 2. The fuse is burnt. 3. The temperature controller is out of control 4. The heating pipe is damaged Brushed adhesive is not evenly distributed or too little Reasons 1.
  • Page 17 3. The machine keeps being heated when not used for a long time, and the adhesive has turned hard The shape of the spine is not rectangular Reasons: 1. The block is not made even 2. Pushing and pressing time of the pressing board is not sufficient 3.

  • Page 18: Packing List

    PACKING LIST Every machine must include the parts as follows when opening the package: Binding machine Power cord Adhesive can cap Gliding handle of the adhesive can User’s manual Adhesive bag Fuse Inner hexagon spanner Hot melt adhesive PRODUCT PARAMETER Model C30+ Power...
  • Page 19 RECOVERY AND DISPOSAL This product complies with the provisions of the European Directive 2012/19/EC. The symbol marked with a crossed out wheelie bin indicates that this product requires separate recycling in the EU. The same is true for products and all accessories marked with this symbol. Products marked as such must not be disposed of with normal household waste, but must be taken to a collection point for the recycling of electrical and electronic equipment.
  • Page 20 Technical Support and E-Warranty Certificate www.vevor.com/support...