Interconnections - Sony StorStation AITe200-UL Operating Instructions Manual

Interconnections

16
Chapter 2 Preparation
Connecting to the USB Interface
Connect the USB connector of the host computer or USB hub to the USB
connector of the drives with the USB cable.
Connecting to the i.LINK Interface
Connect the i.LINK connector of the host computer to the i.LINK connector
of the drives with the one of the i.LINK cables. You can also add the drives
to a daisy chain.
Caution
You cannot use the USB and i.LINK interfaces simultaneously.
AC power
USB or i.LINK cable (supplied with the drives)