Lite Source LS-83353 Assembly Instructions

ITEM NO. LS-83353
ASSEMBLY INSTRUCTIONS:
※ ※ ※ ※ VERY IMPORTANT
PLEASE READ THOROUGHLY. MAKE SURE YOU PROPERLY
ALIGN POLES BEFORE SCREWING THEM TOGETHER TO AVOID
DAMAGING CONNECTION THREADS. NOT ADHERING TO THIS
PROCEDURE MAY VOID YOUR WARRANTY.
1. CAREFULLY UNPACK PARTS FROM CARTON, REMOVE COVERING
FROM PARTS AND CHECK THAT ALL PARTS ARE INCLUDED AS
SHOWN IN THE ILLUSTRATION.
2. CONNECT TUBE (1) TO TUBE (2).
3. PULL OUT EXCESS WIRE,
CONNECT SOCKET SCREW (3) TO BASE (4).
4. FASTEN WASHERS (5), (6) AND NUT (7) USING SPANNER (8).
5. PULL OUT EXCESS WIRE (9).
IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of
electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless
plug can be fully inserted. Do not alter the plug.
ATTENTION
POUR PRÉ VENIR LES CHOCS É LECTRIQUES NE PAS UTILISER CETTE FICHE POLARISÉ E
AVEC UN PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT,
SAUF SI LES LAMES PEUVENT Ê TRE INSÉ RÉ ES A FOND SANS EN LAISSER AUCUNE PARTIE
À DÉ COUVERT.
※ ※ ※ ※ PLEASE INFORM YOUR DEALER IMMEDIATELY IN CASE OF ANY PARTS SHORTAGE.
※ ※ ※ ※ SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
USE LED 30W X 1 LED 5W X1