Lite Source LS-21214 Assembly Instructions

ITEM NO.:LS-21214/LSF-21214
ASSEMBLY INSTRUCTIONS:
1. CAREFULLY UNPACK AND PLACE ALL LAMP PARTS ON A FLAT
SURFACE AND LINE THEM UP AS PER THE SKETCH.
2. SCREW SOCKET SECTION (B) ONTO LAMP BODY (A).
3. INSERT HARP (D) INTO SADDLE ON TOP OF SOCKET SECTION (B).
4. PLACE SHADE (E) ONTO HARP (D) AND TIGHTEN WITH FINIAL (F).
5. INSTALL BULB (C) INTO SOCKET SECTION (B).
6. INSERT THE POLARIZED PLUG INTO WALL OUTLET, TURN ON THE
SWITCH AND ENJOY YOUR NEW LAMP.
USE A 25W 3-WAY CFL TYPE BULB OR 150W (MAXIMUM) 3-WAY A TYPE BULB.
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER) AS A
SAFETY FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT IN A
POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET,
REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. NEVER
USE WITH AN EXTENSION CORD UNLESS THE PLUG CAN BE FULLY AND EASILY INSERTED. DO
NOT TO ALTER THE PLUG.

IMPORTANT SAFETY INSTRUCTIONS

※ PLEASE INFORM YOUR DEALER IMMEDIATELY IN CASE OF ANY PARTS SHORTAGE.
※ SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.