Lite Source LS-83355 Assembly Instructions

ITEM NO. LS-83355
ASSEMBLY INSTRUCTIONS:
※ VERY IMPORTANT
PLEASE READ THOROUGHLY. MAKE SURE YOU PROPERLY
ALIGN POLES BEFORE SCREWING THEM TOGETHER TO
AVOID DAMAGING CONNECTION THREADS. NOT ADHERING
TO THIS PROCEDURE MAY VOID YOUR WARRANTY.
1. CAREFULLY UNPACK PARTS FROM CARTON, REMOVE
COVERING FROM PARTS AND CHECK THAT ALL PARTS ARE
INCLUDED AS SHOWN IN THE ILLUSTRATION.
2. CONNECT TUBE (1) TO TUBE (2).
3. CONNECT TUBE (2) TO TUBE (3).
4. PULL OUT EXCESS WIRE,
CONNECT SOCKET SCREW (4) TO BASE (5)
5. FASTEN WASHERS (6), (7) AND NUT (8) USING SPANNER (9).
6. PULL OUT EXCESS WIRE (10).
IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension
cord unless plug can be fully inserted. Do not alter the plug.
ATTENTION
POUR PRÉ VENIR LES CHOCS É LECTRIQUES NE PAS UTILISER CETTE FICHE POLARISÉ
E AVEC UN PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE
COURANT, SAUF SI LES LAMES PEUVENT Ê TRE INSÉ RÉ ES A FOND SANS EN LAISSER
AUCUNE PARTIE À DÉ COUVERT.
※ PLEASE INFORM YOUR DEALER IMMEDIATELY IN CASE OF ANY PARTS SHORTAGE.
※ SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
USE LED 30W X 1