Related Manuals for Panasonic WV-CU850
Summary of Contents for Panasonic WV-CU850
- Page 1 System Controller Operating Instructions WV-CU850 Model No. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
- Page 2 The exclamation point within an equilat- purchase to aid identification in the event of theft. eral triangle is intended to alert the user to the presence of important operating Model No. WV-CU850 and maintenance (servicing) instructions Serial No. in the literature accompanying the appli- ance.
-
Page 3: Table Of Contents
CONTENTS PREFACE ...................................... 4 PRECAUTIONS ..................................... 4 MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ...................... 5 Front View ....................................5 Rear View ....................................9 INSTALLATIONS ..................................10 SPECIFICATIONS ..................................11 STANDARD ACCESSORY ................................11... -
Page 4: Preface
PREFACE The WV-CU850 System Controller is designed to control • Sets and calls camera preset positions. the System 850 Matrix Switcher. • Activates pre-programmed group presets, tour and It allows operators to perform the following functions when group sequences. combined with the System 850 Matrix Switcher. -
Page 5: Major Operating Controls And Their Functions
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS Front View i o !0 !1 !2 !3 !4 INFORMATION CAMERA MONITOR A LA R M LINK OPERATE AC K BUSY LOCK BUSY ALARM RESET CMENU CMENU RESET FUNC IRIS PREV NEXT GROUP CLOSE OPEN LOGOUT AREA... - Page 6 o Link Indicator (LINK) !6 5 Joystick Controller (L / R / UP / DOWN) Is on (green) when communication is established with The joystick is used to manually operate the PAN/Tilt the Main CPU. Head, or move the cursor in the Camera Menu on the active monitor screen.
- Page 7 @2 Digital Output key (DIGITAL OUT) @8 Numeric keys (0 - 9) This key, in combination with the Numeric keys, is used These keys are used for numeric input into the system to select a logical output number and produce a one such as the camera and monitor number, sequence shot pulse for activating an assigned event.
- Page 8 #4 Forward Run key (FWD RUN) This key is used to run a selected Tour Sequence in for- ward direction on the active monitor. It also restarts a Tour or Group Sequence forward from the next step that was previously paused by pressing the PAUSE key.
-
Page 9: Rear View
Rear View POWER RS–232C DATA ETHERNET DC12V IN CONTRAST BRIGHT BRIGHT $1 Power Switch (POWER, ON / OFF) $5 LCD Contrast Control (LCD CONTRAST) This switch turns the power of the System Controller on Adjusts the contrast of the characters displayed on the and off. -
Page 10: Installations
INSTALLATIONS The installation described below should be made by 3. Place the Rack Mounting Brackets on both sides of the System Controller and tighten with the four supplied qualified service personnel or system installers. screws. 4. Install the System Controller with Rack Mounting •... -
Page 11: Specifications
SPECIFICATIONS Controller Power Required: 12 V DC 800 mA Use exclusive AC Adapter supplied with the controller. LED Display: 4 digits for Monitor, 5 digits for Camera LCD Display: 160 x 64 dot matrix Keys and Joystick: Numeric keys: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, SHIFT, CLEAR Select keys: CAMERA, MONITOR Sequence Control: GROUP PRESET, GROUP SEQ, TOUR SEQ NEXT, PREV, STOP, PAUSE, FWD RUN, REV RUN... - Page 12 5770 Ambler Drive, Mississauga, A Division of Matsushita Electric Corporation of America Ontario, L4W 2T3 Canada (905)624-5010 Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094 Panasonic Sales Company Regional Offices: Division of Matsushita Electric of Puerto Rico Inc.
Need help?
Do you have a question about the WV-CU850 and is the answer not in the manual?
Questions and answers