Advertisement
Advertisement
Table of Contents
Related Manuals for UFM UFM-15
Summary of Contents for UFM UFM-15
- Page 1 UFM-15 Manual I STA ATIO OPERATI G I STRUCTIO S UFM- Clamp-on Flow Watch...
-
Page 2: Table Of Contents
- Output Dimensions Notice Thank you for choosing the UFM-15 Flow Watch. This manual contains essential information for the correct use and operation of the flowmeter. Please read it carefully before use to ensure optimal performance. Improper operation may affect the flowmeter’s accuracy, reduce its service life, or lead to malfunction. - Page 3 If you notice any issues, please contact us immediately. Flow Watch Upper bracket Base bracket Flow Watch Instruction Manual Flow Watch Instruction Manual UFM-15 UFM-15 UFM-15 UFM-15 Connecting cables Instruction manual Coupling paste UFM-15 Manual | © U-F-M b.v. | EN | 2025 3/10...
-
Page 4: Installation And Connection
Installation and Connection Once the Flow Watch bracket is installed, you can connect the flowmeter. The cable terminal is a 5-pin connector. Use the wiring diagram to connect the 4–20 mA and RS485 outputs correctly. Installation steps Ensure the pipe surface is clean and free from dust, paint, or other contaminants. Position the bottom part of the bracket Align the top part of the bracket and against the side of the pipe. - Page 5 • Use the buttons to scroll through options. • Use the buttons to move between digits. • Use the 0– keys to enter numbers. • Press to confirm a selection. UFM-15 Manual | © U-F-M b.v. | EN | 2025 5/10...
-
Page 6: Setup Menu
ispla esc iptions i pla Menu When the flowmeter is powered on, the default display shows Velocity and et otali e , along with the current date and time. to switch the display to i nal alit , i e, lo Press ate, and et otali e . - Page 7 : This is a separate totali er function. Press to start measurement. Press again to stop. It is useful for temporary flow measurements and manual calculations. UFM-15 Manual | © U-F-M b.v. | EN | 2025 7/10...
- Page 8 Setup Menu - Calibration To access calibration settings, press and select option Cali ation, then press to enter. Available options: cale acto The scale factor is the ratio between the actual flow value and the value displayed by the flowmeter. For e ample, if the actual flow is 2.00 and the instrument displays .
- Page 9 OCT open-collector transistor hardware or relay output. : If the flow e ceeds this value, an alarm is also • activated through the same output mechanisms. UFM-15 Manual | © U-F-M b.v. | EN | 2025 9/10...
-
Page 10: Dimensions
Dimensions D(mm) Model (mm) (mm) (mm) min max F5-Φ15 58 1.5/Φ15 8/Φ18 F5-Φ20 58 1.5/Φ20 8/Φ23 F5-Φ25 58 1.5/Φ25 4.5/Φ28 58 1.5/Φ32 4.5/Φ35 F5-Φ32 28.5 18.5 68 1.5/Φ38 8.5/Φ45 F5-Φ40 29.5 1.5/Φ48 8.5/Φ54 F5-Φ50 1.5/Φ58 7.5/Φ64 F5-Φ63 www.u-f-m.com U-F-M b.v. | Ultrasonic Flow Management | +31 (0)165 855 655 | info@u-f-m.nl 10/10...
Need help?
Do you have a question about the UFM-15 and is the answer not in the manual?
Questions and answers