Advertisement
6S10 6S20 6S30 6S11 6S21
Size
<ligne>
Height
<mm>
Accuracy
<per Month>
Battery Life
Battery consumption could be minimum by pulling out the stem
Balance Weight
<μN m>
Clearance
Clearance changes subject to
the glass, case structure, and
the length of the hand.
Original Package
Time measurement
Accuracy
The unit (gate) time of measurement must be set at "10 sec."
and the measurement must be performed in the form of complete watch.
10 sec
10 sec
6S20
15'''
4.90
20
sec
4
years (6S21 3 years)
1.00
Minute
0.40
Second
0.04
Small
0.45mm min.
Hand
Movement
200
pcs
10 sec
Push "A"
Start and Stop the chronograph
Setting the Date
DO NOT set Date between
Push "B"
9:00pm – 1:00am
Reset the chronograph
Pusher
Φ34.6
Center
Chronograph
7
Date
6S10
case
CS
60
S
6S30
60
S
6S11
60
S
Setting the Time
Set CHRONOGRAPH hands to reset
Push A or B to set the hands to the zero position.
The chronograph hands can be advanced rapidly
by continuously pressing button.
A for the Center Chronograph Second hand, B for
1/20 hands
065-A13
Attached
Stem
SR927W
S
CS
Small
Chronograph
1/20 Sec
Second
Minute
Chronograph
6S20
60
7
S
CS
6S21
7
60
60
CS
S
Advertisement
Table of Contents
Related Manuals for Citizen 6S10
Summary of Contents for Citizen 6S10
- Page 1 6S10 6S20 6S30 6S11 6S21 Size 15’’’ Pusher <ligne> 065-A13 Attached Height 4.90 Stem <mm> Φ34.6 SR927W Accuracy <per Month> Battery Life years (6S21 3 years) Battery consumption could be minimum by pulling out the stem Small Chronograph Center 1/20 Sec...
-
Page 5: Displays And Buttons
Cal. 6S10/6S20/6S30 Instruction manual CHRONOGRAPH FUNCTION:CENTER CHRONOGRAPH SECOND HAND 1/4 sec. Timing up to 59 minutes 59 seconds at 1/20 sec. A) DISPLAYS AND BUTTONS B) SETTING THE TIME C) SETTING THE DATE D) USING THE CHRONOGRAPH E) CHRONOGRAPH RESET (INC. AFTER REPLACING BATTERY) -
Page 6: Setting The Time
B) SETTING THE TIME 1. Pull the crown out to the 2nd Click Position. 2. Turn the crown clockwise to set hour and minute hands. 3. After the time has been set, push the crown back to the Normal position. C) SETTING THE DATE 1. - Page 7 E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY) This procedure shoud be performed when the chronograph second hand does not return to the Zero position. 1. Pull the crown out to the 2nd Click Position. 2. Press the button "A" once to set the chronograph second hand to the Zero position. 3.
Need help?
Do you have a question about the 6S10 and is the answer not in the manual?
Questions and answers