Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BLAUBERG CDTE E TP Series
Summary of Contents for BLAUBERG CDTE E TP Series
- Page 1 SPEED ConTrollEr CDTE E .. TP USER’S MANUAL...
-
Page 2: Table Of Contents
CONTENTS Purpose ..................................................3 Delivery set ................................................3 Technical data ............................................... 3 Design and operating principle ........................................ 4 Installation and set-up............................................. 4 Connection to power mains ........................................7 Troubleshooting ..............................................8 Storage and transportation regulations ....................................8 Manufacturer’s warranty ..........................................9 This user’s manual is a main operating document intended for technical, maintenance, and operating staff. -
Page 3: Purpose
PURPOSE Electric fan speed controllers of the CDTE E .. TP series are designed for single-phase motors with a control voltage of up to 10 A. The power supply voltage is determined by the controller automatically (110-240 VAC / 50-60 Hz). The motor speed can be regulated manually with a handle, ranging from the lowest to the highest. -
Page 4: Design And Operating Principle
DESIGN AND OPERATING PRINCIPLE All series CDTE E .. TP speed controllers regulate the rotational speed of single-phase motors by changing the power supply voltage, which is done by adjusting the phase angle. The power supply source is determined by the controller automatically. The minimum speed can be controlled by means of an internal trimmer. - Page 5 Dimensions [mm] CDTE E1.5 ТP; 108.8 CDTE E3.0 ТP CDTE E5.0 ТP 108.8 CDTE E10.0 ТP...
- Page 6 3. Insert the cables into the cable glands and lay the wiring according to the wiring diargam. 3.1 Connect the motor / fan; 3.2 Connect the power supply terminals; 3.3 Connect the unregulated output if necessary. It can be used for powering a valve, bulb etc. WARNING! Before connecting the device, make sure it is properly connected, and cables of appropriate diameter are used.
-
Page 7: Connection To Power Mains
CONNECTION TO POWER MAINS WARNING! To switch off the ON / OFF switch (for 1.5 A & 3.0 A versions only!), connect the 230 VAC power supply to the unregulated output (L1). If this is the case, do not connect the power supply unit to L. CDTE E1.5 ТP;... -
Page 8: Troubleshooting
TROUBLESHOOTING Problem Possible reasons Solution Ensure proper connection to power Connection is limited or down. mains. The unit does not run. The fuse has blown. Replace the fuse. The fan does not rotate when the The minimum fan speed is wrong. Adjust the minimum fan speed. -
Page 9: Manufacturer's Warranty
MANUFACTURER’S WARRANTY The product is in compliance with EU norms and standards on low voltage guidelines and electromagnetic compatibility. We hereby declare that the product complies with the provisions of Electromagnetic Compatibility (EMC) Directive 2014/30/ EU of the European Parliament and of the Council, Low Voltage Directive (LVD) 2014/35/EU of the European Parliament and of the Council and CE-marking Council Directive 93/68/EEC. - Page 10 • Unit misuse. • Violation of the unit installation regulations by the user. • Violation of the unit control regulations by the user. • Unit connection to power mains with a voltage different from the one stated in the user's manual. •...
- Page 11 Quality Inspector’s Stamp Sold by (name and stamp of the seller) Manufacture Date Purchase Date...
- Page 12 CDTE E .. TP_____________________________________________________________________ www.blaubergventilatoren.de B47-5EN-03 CDTE E .. TP...
Need help?
Do you have a question about the CDTE E TP Series and is the answer not in the manual?
Questions and answers