Download
Share
Print this page
Westinghouse MT80A THIN Installation And Assembly Manual
  1. Manuals
  2. Brands
  3. Westinghouse Manuals
  4. TV Mount
  5. MT80A THIN
  6. Installation and assembly manual
Westinghouse MT80A THIN Installation And Assembly Manual

Westinghouse MT80A THIN Installation And Assembly Manual

Universal flat wall mount for 15" - 37" screens
Hide thumbs

Advertisement

Quick Links

Download this manual
Installation and Assembly:
Universal Flat Wall Mount for 15" - 37" Screens
Model: MT80A THIN
Features:
• For 15" to 37" flat panel screens
• Ultra-slim design holds the screen flat against the wall
Visit the Westinghouse Web Site at www.westinghousedigital.com
This product is UL Listed. It must be
installed by a qualified professional
R
installer.
Max UL Load Capacity: 80 lb (36.3 kg)
For customer care call 1-866-287-5555.
ISSUED: 01-17-06 SHEET #: 202-9090-1

Advertisement

loading

Related Manuals for Westinghouse MT80A THIN

Summary of Contents for Westinghouse MT80A THIN

  • Page 1 • For 15" to 37" flat panel screens • Ultra-slim design holds the screen flat against the wall Max UL Load Capacity: 80 lb (36.3 kg) Visit the Westinghouse Web Site at www.westinghousedigital.com For customer care call 1-866-287-5555. ISSUED: 01-17-06 SHEET #: 202-9090-1...

  • Page 2: Table Of Contents

    Note: Read entire instruction sheet before you start installation and assembly. WARNING • Do not begin to install your Westinghouse product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please call customer care at 1-866-287-5555.

  • Page 3: Parts List

    Parts List Description Qty Part # A wall plate 095-4320 B hook bracket 095-4321 C M5 x 12 mm screw 520-1027 D M4 x .7 x 10 mm phillips screw 504-9012 E M4 x .7 x 20 mm phillips screw 504-9020 F .198 ID x .313 OD x .437 H retaining spacer 590-5005...

  • Page 4: Installation To Single Wood Stud Wall

    Installation to Single Wood Stud Wall WARNING • Make sure that the wall will safely support the combined load of the equipment and all attached hardware and components. Use a stud finder to locate the edges of the stud. Use of an edge-to-edge stud finder is highly recommended. Based on its edges, draw a vertical line down the stud’s center.

  • Page 5: Installation To Solid Concrete Or Cinder Block

    WARNING • When installing Westinghouse wall mounts on cinder block, verify that you have a minimum of 1-3/8" of actual con- crete thickness in the hole to be used for the concrete anchors. Do not drill into mortar joints! Be sure to mount in a solid part of the block, generally 1"...

  • Page 6: Attaching Hook Bracket To Flat Panel Screen

    Attaching Hook Bracket to Flat Panel Screen Thread M5 phillips screws (C) to hook bracket (B) making the screws flush with bracket as shown in figures 2.1 and 2.2. fig. 2.1 fig. 2.2 WARNING • If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly secured, damage may occur to screen or product may fail.

  • Page 7: Installing And Removing Flat Panel Screen

    Installing and Removing Flat Panel Screen Hook screen onto wall plate (A) figure 4.1. Tighten SCREEN M5 x 12 mm screws (C), shown in figure 4.2 and detail 1. Note: For security models, tighten M5 x 12 mm screws (C) using 4 mm allen wrench (I) To remove screen from mount, loosen screws (C) and lift screen off of mount.
  • Page 8 REPAIR OR REPLACEMENT – For a period of five (5) years from the original date of purchase, Westinghouse Digital Electronics will repair any defect in material or workmanship in the Product, or, at its option, replace a defective Product.