Advertisement
Quick Links
IMPORTANT!
Read entire instruction sheet before you start assembly and installation.
Important, read before installation:
the cabinet, the cabinet depth should be at least 1.5" more than the height of the TV.
This depth may be more depending on the width and shape of your TV. As an alterna-
tive means of mounting, the mount can still be fastened when it is extended 2" past the
front of the mounting surface which will add 2" of depth to your cabinet.
PART LIST
Part #
QTY.
A 090-0238
1
B 095-4101
1
C 520-2027
4
D 520-2099
4
E 540-9443
4
F 520-2100
4
G 540-9465
4
H 560-1134
3
I 540-9442
8
J 590-1122
1
K 520-2005
4
L 540-9447
4
M 504-2013
4
N 590-5003
4
O 504-2014
4
Some parts may not appear exactly as illustrated.
A
G
Visit the Westinghouse Web Site at www.westinghousedigital.com
Installation & Assembly -
Swivel Mount for LCD TVs
This product is intended for use with 10" to 15" LCD TVs
weighing up to 10 lb and VESA
mounting patterens
In order to locate the mount completely under
DESCRIPTION
LCD assembly
adapter plate
M4 x .7 x 10 mm phillips screw
10-32 x 1.25" phillips screw
.219 x .5 x .25 nylon spacer
10-32 x 2" phillips screw
.219 x .5 x .88 nylon spacer
cord clip
#10 SAE washer
2' helical wire wrap
M5 x .8 x 10 mm phillips
1/4 split washer
M4 x 12 mm phillips screw
.198 x .313 x .437 retaining spacer
M4 x 20 mm phillips screw
F
I
®
75 and VESA
B
H
K
L
1 of 5
Under Cabinet
Model:
®
100
Max Load 10 lb (4.5 kg)
C
M
E
J
N
ISSUED: 04-16-04 SHEET #: 090-9101-1
For customer service call 1-866-287-5555.
MT10 FLIP
D
O
Advertisement
Related Manuals for Westinghouse MT10 FLIP
Summary of Contents for Westinghouse MT10 FLIP
- Page 1 O 504-2014 M4 x 20 mm phillips screw Some parts may not appear exactly as illustrated. Visit the Westinghouse Web Site at www.westinghousedigital.com Installation & Assembly - Swivel Mount for LCD TVs This product is intended for use with 10” to 15" LCD TVs weighing up to 10 lb and VESA ®...
- Page 2 (B) to back of monitor using four M4 x 20 mm screws (O) and four retaining spacers (N) as indicated below. Visit the Westinghouse Web Site at www.westinghousedigital.com FOR VESA 100 MOUNTING PATTERN: 1.) Choose hole pattern indicated below. 2.) Attach adapter bracket (B) to back of monitor using four M4 x 10 mm screws (C) as indicated below.
- Page 3 (F) instead of screws (D) and spacers (E). This lowers LCD Assembly (A) by 7/8" to allow LCD Assembly (A) to open and close without obstruction. Visit the Westinghouse Web Site at www.westinghousedigital.com Round Cover Back holes of LCD assembly...
- Page 4 Note: Make sure all slack is pulled out with mount fully open before replacing cord cover. Cord Cover 4 of 5 ISSUED: 04-16-04 SHEET #: 090-9101-1 Visit the Westinghouse Web Site at www.westinghousedigital.com For customer service call 1-866-287-5555.
- Page 5 REPAIR OR REPLACEMENT – For a period of five (5) years from the original date of purchase, Westinghouse Digital Electronics will repair any defect in material or workmanship in the Product, or, at its option, replace a defective Product.