Page 1
STS TOUR BINDING Splitboard Tech System • Simple, effective and ultralightweight uphill tech binding for splitboard mountaineering. • 300 Series stainless steel & tempered aluminum construction. voile.com...
Page 2
For uphill touring, flip your board halves so the lock lever faces to the outside of each board half. 1.) Remove all hardware from the toe 2.) Assemble the STS Tour Binding for inserts on both board halves. Blow out the left board half.
Page 3
DO NOT TIGHTEN. 7.) Lock your boot into the toe assembly, 8.) Lift the boot, and fasten both screws and reposition the heel assembly so that securely. Repeat for the other board half. the heel rests centered on the climbing wires. voile.com...
Need help?
Do you have a question about the STS TOUR BINDING and is the answer not in the manual?
Questions and answers