Table of Contents
Advertisement
FILE NUMBERING SYSTEM
Stored data is automatically assigned file numbers from 0001 to 9999.
When data is being reviewed, the file number of each image is displayed
in the right corner on the color LCD monitor (see P.77, 82). The file
number is also incorporated into the filename of the image. The filename
consists of "SDIM" followed by the 4-digit file number and extension. For
example: image number 0023 will be stored in the file SDIM0023.X3F.
All DP2S image files will be stored to ###SIGMA folder of the DCIM
folder in the card.
When [Adobe RGB] is selected from [
●
[Color space], the filename will consist of "_SDI" instead of "SDIM".
(However, if the Image Quality is set to RAW, the filename will remain as
"SDIM".)
File numbering can be continuous, or can be reset every time an empty
●
card is detected.
Settings] (P.26) → [File Numbering].
FILE NUMBERING OPTIONS
Continuous*
Auto Reset
LCD SLEEP AND AUTO POWER OFF
The DP2S has [ LCD Sleep ] and [ Auto Power Off ] functions in order
to conserve battery power.
If not used for a predetermined amount of time, the color LCD monitor or
power will be turned off automatically.
LCD Sleep
If not used for a predetermined amount of time, the color LCD monitor will
be turned off automatically. During LCD Sleep, press the shutter button
"half-way" or any other button to turn the LCD monitor back on.
113
The File Numbering can be set from [
Numbering is continuous. The first file number assigned
on an empty card will be one higher than the last
assigned number. (If the inserted card contains DP2S
images with file numbers greater than the last assigned
number, file numbering will continue with one higher than
the highest file number on the card.)
Each time an empty card is inserted, or all images on the
current card are deleted, the file number will reset to its
default value of 0001. (If the inserted card already
contains DP2S images, the file number will not be reset).
Shooting Menu] (P.26) →
Camera
Advertisement
Table of Contents
