Sigma DP2S User Manual page 11

NOTE ON THE TFT COLOR LCD MONITOR
A few pixels may always be lit or may never light on the LCD monitor.
■
This is not a failure or malfunction. Images recorded with the camera will
not be affected.
Because of the normal physical characteristics of the liquid crystal, the
■
reaction of the display may become slow at low temperatures. At high
temperatures, the display may become dark, but it will return to normal at
room temperature.
SD MEMORY CARD AND MULTIMDEIA CARD
The DP2S camera uses a SD memory card, SDHC memory card
and multimedia card.
• In this instruction manual, SD memory card, SDHC memory card and
Multimedia card are referred to as the 'Card'.
• We recommend SDHC memory card or high speed SD memory card to
store images.
• SD memory card or SDHC memory card
incorporate the write protection switch, which
prevents writing
accidentally. If the switch is placed in the 'LOCK'
position, it is not possible to overwrite or erase
your data accidentally.
We do not recommend using a multimedia card in continuous shooting or
■
Movie mode due to the slow writing speed.
Do not leave the card in direct sunlight or near a heating device.
■
Avoid storing cards in environments of high temperature and humidity or
■
where static electricity or electromagnetic fields may be generated
For proper usage of the card, please refer to their instruction manuals.
■
The "Delete" feature of the Camera and PC may not delete the data in
■
the memory card completely. Some data might still remain. If you wish to
remove all data from card securely, please use third party software.
or formatting
HANDLING PRECAUTIONS
(SOLD SEPARATELY)
the card
10