Related Manuals for Eastwood L6700
Summary of Contents for Eastwood L6700
- Page 1 Item #72051 #72052 L6700 LED WELDING HELMET INSTRUCTIONS Pre-production helmets shown. Actual helmets may differ slightly...
-
Page 2: Specifications
Inside and Stepless CONTENTS Arc Sensors: Light state: DIN 3 (1) Eastwood L6700 LED Welding Helmet (with batteries installed) either Light or Dark version [A] Dark state: DIN 5-9 / 9-13 (1) Spare Inner Lens Shield [B] TIG capability: >2A... -
Page 3: Safety Information
• If other persons or pets are in the area of plasma cutting, use welding beginning an electric arc welding or plasma cutting operation. screens to protect bystanders from sparks and arc rays. Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com To order parts and supplies: 800.343.9353 >> eastwood.com... -
Page 4: First Aid
• This welding helmet is not intended for use in direct overhead welding positions. Heavy spark and slag shower could cause serious personal injury. Additional protective gear must be worn when welding overhead. Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com To order parts and supplies: 800.343.9353 >> eastwood.com... -
Page 5: Operation
Delay Delay Mode Switch Mode Switch Dial Dial " " " " Adjustment Adjustment Dial Dial Viewing Lens Cartridge Viewing Lens Cartridge Retainer Thumbscrew Retainer Thumbscrew Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com To order parts and supplies: 800.343.9353 >> eastwood.com... - Page 6 – Shielded Semi-Automatic Arc Welding MIG (light) – MIG on Light Alloys – Plasma Arc Cutting TIG, GTAW – Gas Tungsten Arc Welding – Plasma Arc Welding Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com To order parts and supplies: 800.343.9353 >> eastwood.com...
- Page 7 • When fully charged, unplug the charging cable and close the port cover to maintain the highest level of moisture resistance. Helmet distance adjustment Helmet distance adjustment Quick-adjust Quick-adjust rear support knob rear support knob " " " " Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com To order parts and supplies: 800.343.9353 >> eastwood.com...
-
Page 8: Maintenance
• Reinstall Battery Covers in reverse order. Reinsert viewing lens cartridge and fasten viewing lens cartridge retainer Thumbscrew. FIG. 5 FIG. 5 " " " " " " " " Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com To order parts and supplies: 800.343.9353 >> eastwood.com... -
Page 9: Troubleshooting
PROBLEM CAUSE CORRECTION This helmet is compatible with Eastwood Welding Helmet Magnification Lenses (optional, not included). These improve vision of the weld puddle, just like reading glasses, thereby enabling you to Dirt, Debris Clean the outer lens and ensure the four arc sen- have better control of the weld. - Page 10 NOTES NOTES Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com To order parts and supplies: 800.343.9353 >> eastwood.com...
-
Page 11: Additional Items
Visit eastwood.com for complete info and pricing. If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: tech@eastwood.com PDF version of this manual is available at eastwood.com The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA 800.343.9353 eastwood.com...
Need help?
Do you have a question about the L6700 and is the answer not in the manual?
Questions and answers