Page 1
Part #20652 #10/12 CUP TIG GAS LENS KIT INSTRUCTIONS...
Page 2
The EASTWOOD GAS LENS KIT contains all the common consumable parts in both 1/16” [1.6mm] & 3/32” [2.4mm] sizes. These parts will also fit other brands of size 17, 18 & 26 torches. INCLUDES (2) Gas Lens Body, 1/16” [1.6mm] (A) (2) Gas Lens Body, 3/32”...
Page 3
• Always keep a fire extinguisher nearby while welding. • Use welding blankets to protect painted and or flammable surfaces; rubber weather-stripping, dash boards, engines, etc. • Ensure power supply has properly rated wiring to handle power usage. To order parts and supplies: 800.345.1178 >> eastwood.com...
Page 4
• Use an OSHA approved respirator when welding in confined spaces or where there is inadequate ventilation. • Never weld coated materials including but not limited to: cadmium plated, galvanized, lead based paints. Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com...
Page 5
• Electric welding heats metal and tools to temperatures that will cause severe burns! • Use protective, heat resistant gloves and clothing when using Eastwood or any other welding equipment. Never touch welded work surface, torch tip or nozzle until they have completely cooled.
Page 6
Tungsten Rod protrudes out of the Gas Nozzle (FIG 1-C). 6. When the desired protrusion of the Tungsten Rod is achieved, tighten the Rear Cap to secure the Tungsten Rod in place. The assembly is now complete. Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com...
Page 7
FIG. 1 Torch FIG. 2 To order parts and supplies: 800.345.1178 >> eastwood.com...
Page 8
3/32” Collet If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.544.5118 >> email: techelp@eastwood.com PDF version of this manual is available online >> eastwood.com/20652manual The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA US and Canada: 800.345.1178 Outside US: 610.718.8335...
Need help?
Do you have a question about the 20652 and is the answer not in the manual?
Questions and answers