Page 4
二、Specification Size:87x36x13mm(Curved handle caller‘s wire length:30cm(normal)/120cm(Longest stretch);Linear handle caller’s wire length:57cm) Battery:Button type 23A mercury free alkaline manganese 12V battery x1 Operating Frequency:433.92MHZ±200KHz Key:2pcs(Main body 1pcs+handle 1pcs) Pilot lamp:Display of main button position (illuminated when signal is transmitted) Long press automatic sleep duration:8s(After releasing the button for 3 seconds, it will automatically return to standby mode)...
Page 5
2. Call information transmission (* can only be used with a receiver): When the receiving host is in standby receiving mode, press the registered caller button Press and hold the button (main button/handle button) for more than 1 second, then release the button, and the receiving host will prompt according to the registered number/prompt tone.
Page 6
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Need help?
Do you have a question about the TH006 and is the answer not in the manual?
Questions and answers