Aimco Auditor ADTT Quick Start Manual

ADTT - Quick Start Guide
Getting started with the Auditor ADTT Torque Tester
Front
Rundown Adapter
Connection
Tester
Max
Capacity
LEDs
Function
Soft Keys
Please note. To avoid over-torquing, ensure the ADTT has the correct torque range for the tool before beginning.
1
Measurement Screen
3
The last measurement mode used (Peak, Click, Track or Pulse) will be automatically selected first. This can be
changed by pressing the 'Measurement Mode' function key.
Toggle the measurement modes by pressing the function key until you get to the mode you require, then you are
ready to start measuring torque with the ADTT.
Click mode
Peak mode
White OLED
Display Screen
Directional
Arrow Keys
On/Off Button
Green 'Accept' Key
Switching On
Turn on your ADTT
by pressing the on/off
button situated below
the arrow keys.
Pressing this button
whilst the ADTT is on
will turn it off.
Track mode
Pulse mode
Micro USB Port
(Data Transfer)
Starting the ADTT
2
The first screen that shows
is the splash screen, which
changes to show the ADTT's
serial number and calibration
due date. The software
version and keyboard version
are also both indicated by TM
and KB respectively.
Back
External Transducer Port:
Compatible with ARTU Rotary
Transducers and ASTU
Stationary Transducers
2 x "C" Cell NiMH
or Alkaline Battery
5V DC Power Port
Compartment
Standard
rundown
adapter