Advertisement
Quick Links
11111111111111111111111111111111111111111111111111
47260188
Reversible Panic/Fire Rim Exit Device
t
•
•
•
■
■
·••-
ALLEGION"
20 Series Rim Exit Device
Parts Identification
1-877-671-7011
Tools
May
require:
www.allegion.com/us
FALCON®
Installation Instructions
Required:
Metal door
only,
1/4-20 tap
Advertisement
Related Manuals for Falcon 20 Series
Summary of Contents for Falcon 20 Series
- Page 1 FALCON® 11111111111111111111111111111111111111111111111111 47260188 20 Series Rim Exit Device Reversible Panic/Fire Rim Exit Device Installation Instructions Tools Required: require: Metal door only, 1/4-20 tap Parts Identification • • • ■ ■ ·••- ALLEGION" 1-877-671-7011 www.allegion.com/us...
- Page 2 These instructions are presented in step by step sequence. Attach a template with tape to your door and frame as an aid to prepare for device mounting. Please read instructions thoroughly before installation. Use this diagram to determine the hand of the door. Outside of door Inside of door Single Door...
- Page 3 Install device body. Install strike. a. Remove chassis cover from device chassis. Mount device • For panic rated rim exit device: body horizontally to the drilled position using supplied 1/8" (3 mm) strike shim is for prepared door with 1/2" (13 mounting screws or sex bolts.
- Page 4 Dog the device. Dogging the device during high traffic periods will extend the life of the device (Dogging is not available on fire rated models as fire doors must remain closed and latched.) Dogging: Depress push bar, insert dogging hex wrench and turn clockwise 90 degrees. The push bar will remain depressed and the latch will remain retracted.
Need help?
Do you have a question about the 20 Series and is the answer not in the manual?
Questions and answers