Table of Contents
Related Manuals for Blue-White CHEM-FEED C-600P
Summary of Contents for Blue-White CHEM-FEED C-600P
- Page 1 ® CHEM-FEED DIAPHRAGM INJECTOR MODEL C-600P & C-600HV 5300 Business Drive Huntington Beach, CA 92649 Phone: 714-893-8529 FAX: 714-894-9492 E-mails: sales@blue-white.com or customerservice@blue-white.com www.blue-white.com...
-
Page 2: Table Of Contents
Page 2 C-600 TABLE OF CONTENTS SECTION PAGE 1.0 Introduction................2 2.0 Specifications................3 3.0 Features..................3 3.1....Pump Dimensions............4 4.0 How to install the metering pump..........5 4.1....Mount Location............4 4.2....Installation..............6 4.3....Electrical connections..........7 4.4....Tubing and Fittings Installation........8 4.5....Injection/Check Valve Fitting Installation....9 5.0 How to operate the metering pump.........10 5.1....Adjusting the Pump Output - Standard Models..10 5.2....Adjusting the Pump Output - Fixed cycle Models..10 5.3....Priming the Pump............10... -
Page 3: 2.0 Specifications
Page 3 C-600 2.0 Specifications Maximum Working Pressure..125 psig / 8.6 bar* (C-600P) 20 psig / 1.37 bar* (C-600HV) Maximum Fluid Temperature..130 F / 54 C Output Accuracy......+/- 10% of maximum (water @ 70 F, 0 psig, and 5’ suction lift) Ambient Temperature Range..14 to 110 F / -10 to 43 C Enclosure.........Zinc - Metal Duty Cycle........Continuous... -
Page 4: Pump Dimensions
Page 4 C-600 Pump Dimensions C-600P 6.75” 5.0625” 171.5mm 134.9mm 6.25” 158.8mm C-600HV 6.75” 171.45mm 6.125” 155.5mm 7” 177.8mm... -
Page 5: How To Install The Metering Pump
Page 5 C-600 How To Install the Metering Pump CAUTION: PROPER EYE AND SKIN PROTECTION MUST BE WORN WHEN INSTALLING AND SERVICING THE PUMP. CAUTION - TO PREVENT CHEMICAL OVERDOSING WHEN USED AS A POOL OR SPA CHLORINATOR, POWER MUST BE REMOVED FROM THIS PUMP DURING THE BACKWASH CYCLE AND DURING PERIODS OF NO FLOW IN THE RECIRCULATION SYSTEM. -
Page 6: Installation
Page 6 C-600 4.2 Typical Installation WALL MOUNTING Stud WEATHER RESISTANT Stud Mount Masonry Pumping unit Discharge Tube Chemical Container Suction Tube (vertical) -
Page 7: Electrical Connections
Page 7 C-600 Electrical Connections Be certain to connect the pump to the proper supply voltage. Using the incorrect voltage will damage the pump and may result in injury. The voltage requirement is printed on the pump serial label. POWER: 115V60Hz (0.74A max.), 220V50Hz (0.31A max.), 230V60Hz (0.36A max.), 24VAC/60Hz (3.4A max.), 12VDC (3A max.), 24VDC (1.5A max.) Note: When in doubt regarding your electrical installation, contact a licensed electrician. -
Page 8: Tubing And Fittings Installation
Page 8 C-600 Cycle Adjustment Potentiometer 120VAC Common 220/230 VAC Earth Ground (green) LOAD Timer Power Board Cord Neutral MOTOR FIG. 4.6 WIRING DIAGRAM - FIXED TIMERS How To Install the Tubing and Fittings CAUTION: PROPER EYE AND SKIN PROTECTION MUST BE WORN WHEN INSTALLING AND SERVICING THE PUMP Inlet Tubing - Locate the inlet fitting of the pump head. -
Page 9: Injection/Check Valve Fitting Installation
Page 9 C-600 Discharge Tube Footvalve Adapter (Opaque P.E.) Suction Tubing O-Ring Tube Nut Ceramic Ball Ceramic Outlet Adapter Pump Head Weight O-Ring Footvalve Body Inlet Adapter Footvalve Strainer Tube Nut FootValve Assembly Suction Tubing Must be installed in (clear PVC) a vertical position. -
Page 10: How To Operate The Metering Pump
Page 10 C-600 How To Operate The Pump Adjusting the Pump Output The flow rate can be adjusted within a range of approximately 10%-100% of maximum output (27:1 turndown ratio) by means of a mechanical, cam type mechanism. The mechanism adjusts the pump’s stroke length to 1 of 27 settings within the flow range. -
Page 11: Measuring The Pump's Output - Volumetric Test
Page 11 C-600 Measuring the Pump’s Output - Volumetric Test. This volumetric test will take into account individual installation factors such as line pressure, fluid viscosity, suction lift, etc. This test is the most accurate for measuring the injector’s output in an individual installation. 1. -
Page 12: C-600Hv Parts List
Page 12 C-600 C-600HV Parts List Catalog No. Description Amount Reqd. C-3391-10 Injection Fitting 90008-042 Clamp C-334-10 Tubing 5/8” O.D. , 10 FT C-428-10 Top Adaptor, 5/8” Tube 90003-607 O-ring (EP) 90006-005 Spring C-926E Check Valve (EP C-926V Check Valve (Aflas) C-3203N-1 Headblock (Clear) C-3504... -
Page 13: Exploded View (C-600Hv)
Page 13 C-600 C-600HV Exploded View... -
Page 14: C-600P Parts List
Stator S/A 115V/60Hz, blue-black (lead wires) C-615P-2 Stator S/A 230V/60Hz, red-black (lead wires) C-615P-3 Stator S/A 220V/50Hz, brown-blue (lead wires) C-615P-4 Stator S/A 24V/60Hz, blue-white (lead wires) C-615P-5 Stator S/A 24V/50Hz, white-white (lead wires) C-615P-6 Stator S/A 230V/60Hz, red-yellow (lead wires) C-615P-8... -
Page 15: Exploded View (C-600P)
Page 15 C-600 C-600P Exploded View Optional T.I. Anti siphon valve Threaded Anti siphon fitting valve, ¼ & ½” N.P.T. -
Page 16: Warranty
C-600 Limited Warranty Your Blue-White product is a quality product and is warranted for a specific time from date of purchase (proof of purchase is required). The product will be repaired or replaced at our discretion. Failure must have occurred due to defect in material or workmanship and not as a result of operation of the product other than in normal operation as defined in the product manual. -
Page 17: Authorized Service Centers
Chemical Resistance Warning Blue-White offers a wide variety of wetted parts. Purchasers, installers, and operators of Blue-White products must be well informed and aware of the precautions to be taken when injecting or measuring various chemicals, especially those considered to be irritants, contaminants or hazardous. - Page 18 Page 18 C-600 NOTES:...
- Page 19 Page 19 C-600 NOTES:...
- Page 20 Users of electrical and electronic equipment (EEE) with the WEEE marking per Annex IV of the WEEE Directive must not dispose of end of life EEE as unsorted municipal waste, but use the collection framework available to them for the return, recycle, recovery of WEEE and minimize any potential effects of EEE on the environment and human health due to the presence of hazardous substances.
Need help?
Do you have a question about the CHEM-FEED C-600P and is the answer not in the manual?
Questions and answers