® Page 2 CHEM-FEED CFPS Introduction Features Specifications Dimensions Mounting a pump to the system Mounting the skid system to floor/wall Component Identification and Typical Operation - Single Skid ® 7.1 How to Operate the Chem-Feed Skid System - Single Skid Component Identification and Typical Operation - Duplex Skid 8.1 How to operate the Chem-Feed Skid System - Duplex Skid Component Identification and Typical Operation - Triplex Skid...
Page 3
® CHEM-FEED CFPS Page 3 READ THE INSTRUCTION MANUAL PRIOR TO INSTALLATION AND USE. +1 (714) 893 - 8529 sales@blue-white.com customerservice@blue-white.com 5300 Business Drive Huntington Beach, CA 92649...
Check Valve - Protects the user from back-flow during pump maintenance. Ships on all systems. Flow Verification Sensor - MS6 accurately verifies chemical feed. Exclusive to Blue-White®. Inlet Y Strainer - Protects system components from damage cause by dirt or debris.
® Page 5 CHEM-FEED CFPS Specifications Items listed below are standard available items and ship with most configurations. Your system may be custom- ized with components not listed below. Skid Chemically resistant polyethylene structure FLEXFLO ® M1, M2, M3 or M4 peristaltic pumps Pump (sold separately) ®...
® Page 6 CHEM-FEED CFPS Dimensions Your Chem-Feed System may be designed differently from drawings below. However, the dimensions shown below remain the same no matter your configuration. Single Pump System: 49.50in 45.37in 46.47in 125.73cm 115.24cm 118.04cm 32.15in 30.00in 76.20cm 81.65cm 34.00in 88.90cm...
® Page 8 CHEM-FEED CFPS ® Mounting Pump to the Chem-Feed System - Single and Dual System Socket Head Screw, SS #10-32 - .625” #10 washer, and 10-32 nut. (Qty: 4 of each per pump) Mounting Bracket (Qty: 2 per pump)
® CHEM-FEED CFPS Page 9 Mounting the Chem-Feed® System - Single and Dual System FLOOR MOUNT The Skid system is shipped with the mounting brackets ready for floor mounting. Mount the skid system to the floor using eight 1/4-20 Bolts (see fig. 1) through the mounting brackets. fig.1 WALL MOUNT Remove the mounting brackets using a 1/4”...
® Page 10 CHEM-FEED CFPS Component Identification and Typical Operation - Single Pump Skid Cali brat ion Cyli nder Gaug e Guard Pulse Dampener Press ure Gaug e (optional) One way Check Valve Chemical Feed (with union) Flowmeter * PRV = Pressure Relief Valve preset at 50psi...
To calibrate pump at maximum speed into your system, Press the prime button on pump. The prime mode runs the pump at maximum speed for 60 seconds (1 minute) on all Blue-White® ProSeries-M pumps. To calibrate pump at your desired feed rate, you must pre-program your pump speed before running this routine.
To calibrate pump at maximum speed into your system, Press the prime button on pump. The prime mode runs the ® pump at maximum speed for 60 seconds (1 minute) on all Blue-White pumps. To calibrate pump at your desired feed rate, you must pre-program your pump speed before running this routine.
To calibrate pump at maximum speed into your system, Press the prime button on pump P-1. The prime mode runs the pump at maximum speed for 60 seconds (1 minute) on all Blue-White ProSeries pumps. To calibrate pump at your desired feed rate, you must pre-program your pump speed before running this routine.
Page 16
To calibrate pump at maximum speed into your system, Press the prime button on pump P-3. The prime mode runs the pump at maximum speed for 60 seconds (1 minute) on all Blue-White ProSeries pumps. To calibrate pump at your desired feed rate, you must pre-program your pump speed before running this routine.
Page 17
® Page 17 CHEM-FEED CFPS Chemical Outlet 1 V-10 Chemical PD-1 MS-6-1 Inlet 2 CV-1 PRV-1 V-12 V-22 CV-2 Safety vent to tank V-11 Chemical CC-1 Outlet 1 V-21 V-13 PD-2 MS-6-2 V-14 V-18 V-19 V-16 U-10 CV-3 PRV-2 V-20 V-15 V-17 Chemical...
Page 18
The warranty status is determined by the pump's serial label and the sales invoice or receipt. The serial label must be on the pump and be legible. The warranty status of the pump will be verified by Blue-White or a factory authorized service center.
® Page 19 CHEM-FEED CFPS ® 11.0 Chem-Feed Skid System Matrix ® CHEM-FEED Engineered Plastic Skid System Model Number CFPS-1 Single pump system - Single Pump - single chemical / single outlet, PE structure CFPS-2 Duplex system - Dual Pump - single chemical / single outlet, PE structure CFPS-3 Triplex pump system - Dual Pump - single chemical / single outlet, PE structure Piping / Valves / Unions / Seal Materials...
Page 20
The WEEE marking applies only to countries within the European Union (EU) and Norway. Appliances are labeled in accordance with European Directive 2002/96/EC. Contact your local waste recovery agency for a Designated Collection Facility in your area. www.blue-white.com sales@blue-white.com customerservice@blue-white.com P.N.
Need help?
Do you have a question about the CHEM-FEED CFPS Series and is the answer not in the manual?
Questions and answers