Hardware Installation - Freecom MOBILE DRIVE Manual

Freecom Mobile Drive
Chapter 2: Hardware Installation
GB
2
Since USB 2.0 is backwards compatible with USB 1.1, the Freecom Mobile Drive
can be connected to all USB ports. When connected to a USB 1.1 port, however,
the performance (data transfer rate) of the Freecom Mobile Drive will be much
lower than when the drive is connected to a USB 2.0 port.
For optimal performance, the Freecom Mobile Drive should always be
connected to a USB 2.0 port. The Freecom USB 2.0 PCI Host Controller
Card is available at www.freecom.com.
12
1. Connect the interface cable to the Freecom F r e e c o m
Mobile Drive.
3. Connect the interface cable to the interface port of your
computer.