Freecom LTO 460I Manual page 6

Ensure that all fans in your server are in place and operational, and make sure that empty
bays have the appropriate blanking plates installed so that airflow is maintained.
Do I need additional items for installation?
• If you do not have a spare, suitably rated SCSI connector on your server, a new HBA (also
known as a SCSI card) will be required. You will need to purchase and install the new HBA
into an unused, 64-bit PCI expansion slot within your server before installing your tape drive.
Full installation instructions and all necessary cables and mounting hardware are normally
provided with the HBA.
• You may also need mounting hardware. See "What are the mounting requirements for the
tape drive?" on page 3.
4 4