Summary of Contents for Sunrise Medical SWITCH-IT Proximity
Page 1
® 247750 Rev. D Switch-It ® Proximity Head Array Ow ne r ’s M a nu a l...
Page 2
Thank you for choosing a Switch-It product. We want to hear your questions or comments about this manual, the safety and reliability of your system, and the service you receive from your Sunrise Medical authorized dealer. Please feel free to write or call us at the address and telephone number below:...
Proximity Head Array Owner’s Manual ® NOTE: Check all parts for shipping damage. In case of damage DO NOT use. Contact Carrier/Sunrise Medical for further instructions. WARNING DO NOT install this equipment without rst reading and understanding this manual. If you are unable to understand the Warnings, Cautions, and Instructions, contact a quali ed clinician or Sunrise Medical authorized dealer - otherwise injury or damage may occur.
Electro-Magnetic Fields (EMF) generated by power wheelchairs than other available proximity sensors. Switch-It proximity sensors have the versatility to utilize 3, 4, or 5 proximity sensors built as an array to control the power wheelchair. These arrays may be built with the sensors separate from the headrest...
F. Maintenance Tips The wheelchair’s lifespan is dependent on it being well maintained. For information concerning speci c settings, maintenance, or repair work, please contact your Sunrise Medical authorized dealer. Hygiene measures when being re-used: Prior to the wheelchair being re-used, it must be carefully prepared. All surfaces which come into contact with the user must be treated with a disinfection spray.
3. All wearable items (covers, pads, etc.) are covered under warranty for three (3) months from the date of shipment, provided normal use, unless modi ed or damaged. Warranty claims should be processed through the nearest Sunrise Medical authorized dealer. A Return Authorization number must be obtained prior to returning the item for evaluation, along with details of the issue.
Need help?
Do you have a question about the SWITCH-IT Proximity and is the answer not in the manual?
Questions and answers